wiki:GENIRacksHome/InstageniRacks/Operators/UtahStitch

Version 2 (modified by hdempsey@bbn.com, 5 years ago) (diff)

added outline info

University of Utah Stitch Aggregate Operational Data

This page captures information that is intended for Operators. The goal is to capture site contacts, connectivity, and VLANs.

Contacts

Site contact information.

Contact Name: Robert Ricci Contact Email: ricci@cs.utah.edu Also instageni-ops@flux.utah.edu


Data Plane

This section captures Data plane information for detailing site topology, VLAN, Network Providers (I2/Regional) and network address information. Additional site which is not specified, but deemed important, can also be captured here.

Data plane connectivity diagram

network diagram for Utah

Layer 2 information

*In the VLAN column, a single ID indicates that the port is an access port. A T followed by one or more IDs indicates that the port is a trunk (aka tagged) port with those VLAN IDs.

Rack Data Plane 5406

PortConnects ToVLAN Config*
A23
A24 XXX vlan XXX

VLAN 1750, GENI BACKBONE On Ramp: NLR.CHIC Te 7/4

Project based VLANs to XXX

Layer 3 information

NONE

Experimental VLANs

VLAN IDOF Controlled?Purpose
XXX

VLAN Translation Table

Project based VLAN translations provisioned as needed.

Non-VLAN Connections

NONE

Campus Connections

The "campus" connections actually span several locations associated with the University of Utah, but not on one campus.

L2 5 X GE

Public Internet

via Internet2


Control Plane

This section captures control plane information for Utah-stitch.

Control plane connectivity diagram

Resource control subnets

IP addresses: 192.XXX.XXX.XXX

DNS: XXX

Firewall/IP tables

unknown


Experiment Resources

This aggregate does not currently support OpenFlow.

Links to resource and network aggregates available for experimenters for Utah-stitch:

Attachments (1)

Download all attachments as: .zip