wiki:GENIRacksHome/InstageniRacks/Operators/UtahCloudlab

Version 2 (modified by tupty@bbn.com, 5 years ago) (diff)

--

Utah CloudLab Operational Data

This page captures GENI rack information that is intended for Operators. The goal is to capture site contacts, connectivity, and VLANs.

Contacts

Site contact information:


Data Plane

This section captures data plane information for Utah CloudLab detailing site topology, VLAN, Network Providers (I2/Regional) and network address information. Be sure to note the total link bandwidth of data plane connections. Note the vendor and model for any OpenFlow switches that are not part of a GENI rack.

Additional sites that are important to operations for this one (e.g. VLANs through a non-GENI regional) should also be captured here.

Data plane connectivity

Layer 2 information

Provide layer 2 information for Circuits VLANs, plus network connection end-points, and purpose of VLAN.

*In the VLAN column, a single ID indicates that the port is an access port. A T followed by one or more IDs indicates that the port is a trunk (aka tagged) port with those VLAN IDs.

====BigHP1 Switch ====

PortConnects ToVLAN Config*
4.21 Science DMZ 2.4 2100-3499

Layer 3 information

NONE

Experimental VLANs

VLAN IDOF Controlled?Purpose
2100-3499 No Transport to Utah stitch aggregate for GENI stitching

VLAN Translation Table

NONE

Non-VLAN Connections

NONE

Campus Connections

NONE

Public Internet

NONE


Control Plane

Control Plane Connectivity

Upstream control plane connectivity is provided by UEN, who connects to multiple commercial and R&E providers.

Resource control subnets

<<Enter Control network subnet>>

Firewall/IP tables

<< If firewall or IP tables are in use, insert who is responsible and any information deemed of importance about the setup. >>


Experiment Resources

Links to resource and network aggregates available for experimenters for <<SitenameX>>:

Attachments (1)

Download all attachments as: .zip