wiki:GENIRacksHome/InstageniRacks/Operators/Rutgers

Version 1 (modified by lnevers@bbn.com, 7 years ago) (diff)

--

Rutgers University Operational Data

This page captures information for InstaGENI sites that is intended for Operators. The goal is to capture site contacts, connectivity, and VLANs.

Contacts

Site contact information for InstaGENI Northwestern.

Contact Name: insert_name_here Contact Email: insert_email_addr_here


Data Plane

This section captures Data plane information for Rutgers University detailing site topology, VLAN, Network Providers (I2/NLR/Regional) and network address information. Additional site which is not specified, but deemed important, can also be captured here.

Data plane connectivity diagram

Provide a diagram that captures device, ports and VLAN information at ingress and outgress for transport network. For non-OF connections provide device names and ports connected to transport network (NRL/I2/Regional) and VLAN used for those ports. Diagram should capture campus connections.

Layer 2 information

Provide layer 2 information for Circuits VLANs, plus network connection end-points, and purpose of VLAN.

Layer 3 information

If applicable, provide layer 3 information. If not applicable, replace with "none".

Experimental VLANs

Provide a table of Experimental VLAN detailing VLAN numbers, the endpoints, its purposes and whether VLAN is OF or non-OF.

VLAN Translation Table

If applicable, provide any VLAN translation details for site.

Non-VLAN Connections

If applicable provide details for non VLAN connections. If not applicable, replace with "none".

Campus Connections

Document what network campus connection are in place for this rack.

Public Internet

If applicable, provide details for public internet connectivity.


Control Plane

This section captures Control plane information for Rutgers University detailing topology and network address information. Additional site which is not specified, but deemed important, can also be captured here.

Control plane connectivity diagram

Provide a diagram that captures device, port for the Control plane topology. Additional control network specific data which is not specified, but deemed important, can also be captured here.

Resource control subnets

Provide a list of subnets used in the rack and their intended use.

Firewall/IP tables

If firewall or IP tables are in use, insert who is responsible and any information deemed of importance about the setup.


Experiment Resources

Links to resource and network aggregates available for experimenters for Rutgers University:

Attachments (2)

Download all attachments as: .zip