[[PageOutline(1-2)]] = University of Utah Downtown Data Center InstaGENI Confirmation Tests = For details about the tests in this page, see the '''[wiki:GENIRacksHome/InstageniRacks/SiteConfirmationTests InstaGENI Confirmation Test Plan]''' page.[[BR]] For site status see the '''[wiki:GENIRacksHome/InstageniRacks/ConfirmationTestStatus InstaGENI New Site Confirmation Tests Status]''' page. __Note:__ Omni nick_names for site aggregate used for these tests are: {{{ ig-gpo=,https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0 ig-of-gpo=,https://foam.gpolab.bbn.com:3626/foam/gapi/1 ig-utahddc=,https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am ig-of-utahddc=,https://foam.utahddc.geniracks.net:3626/foam/gapi/1 }}} == IG-CT-1 - Access to New Site VM resources == Got Aggregate version, which showed AM API V1, V2, and V3 are supported and V2 is default: {{{ $ omni.py listresources -a ig-utahddc -o 20:25:53 INFO omni: Loading config file /home/lnevers/.gcf/omni_config 20:25:53 INFO omni: Using control framework portal 20:25:53 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 20:25:53 INFO omni: Saving output to a file. 20:25:53 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 20:25:56 INFO omni: Listed advertised resources at 1 out of 1 possible aggregates. 20:25:56 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 20:25:56 INFO omni: (PG log url - look here for details on any failures: https://www.utahddc.geniracks.net/spewlogfile.php3?logfile=fc992748cc1ed9dcc23997cd168830b1) 20:25:56 INFO omni: Writing to 'rspec-utahddc-geniracks-net-protogeni.xml' 20:25:56 INFO omni: ------------------------------------------------------------ 20:25:56 INFO omni: Completed listresources: Options as run: aggregate: ['ig-utahddc'] framework: portal output: True project: ln-prj Args: listresources Result Summary: Queried resources from 1 of 1 aggregate(s). Wrote rspecs from 1 aggregate(s) to 1 file(s) Saved listresources RSpec from 'unspecified_AM_URN' (url 'https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am') to file rspec-utahddc-geniracks-net-protogeni.xml; 20:25:56 INFO omni: ============================================================ $ omni.py getversion -a ig-utahddc 20:27:36 INFO omni: Loading config file /home/lnevers/.gcf/omni_config 20:27:36 INFO omni: Using control framework portal 20:27:36 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 20:27:36 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 20:27:38 INFO omni: (PG log url - look here for details on any failures: https://www.utahddc.geniracks.net/spewlogfile.php3?logfile=6fc5bafdee2d1d196ccfff648105f657) 20:27:38 INFO omni: AM URN: unspecified_AM_URN (url: https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am) has version: ( (PG log url - look here for details on any failures: https://www.utahddc.geniracks.net/spewlogfile.php3?logfile=6fc5bafdee2d1d196ccfff648105f657).) 20:27:38 INFO omni: { 'code_tag': '39c7dc5f6b119ff441e556e1547f80258b0923c9', 'geni_ad_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd', 'type': 'GENI', 'version': '3'}], 'geni_api': 2, 'geni_api_versions': { '1': 'https://boss.utahddc.geniracks.net:12369/protogeni/xmlrpc/am/1.0', '2': 'https://boss.utahddc.geniracks.net:12369/protogeni/xmlrpc/am/2.0', '3': 'https://boss.utahddc.geniracks.net:12369/protogeni/xmlrpc/am/3.0'}, 'geni_request_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/request.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/request.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/request.xsd', 'type': 'GENI', 'version': '3'}], 'hostname': 'boss.utahddc.geniracks.net', 'hrn': 'utahddcinstageni.cm', 'interface': 'aggregate', 'url': 'https://boss.utahddc.geniracks.net:12369/protogeni/xmlrpc/am', 'urn': 'urn:publicid:IDN+utahddc.geniracks.net+authority+cm'} 20:27:38 INFO omni: ------------------------------------------------------------ 20:27:38 INFO omni: Completed getversion: Options as run: aggregate: ['ig-utahddc'] framework: portal noGetVersionCache: True project: ln-prj Args: getversion Result Summary: Got version for https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am 20:27:38 INFO omni: ============================================================ }}} The InstaGENI version " 'code_tag':'39c7dc5f6b119ff441e556e1547f80258b0923c9'" is the same as the other available InstaGENI sites: {{{ getversion-geni-kettering-edu-protogeniv2.json: { 'code_tag': '39c7dc5f6b119ff441e556e1547f80258b0923c9', getversion-instageni-cs-princeton-edu-protogeni.json: { 'code_tag': '39c7dc5f6b119ff441e556e1547f80258b0923c9', getversion-instageni-gpolab-bbn-com.json: { 'code_tag': '39c7dc5f6b119ff441e556e1547f80258b0923c9', getversion-instageni-northwestern-edu-protogeniv2.json: { 'code_tag': '39c7dc5f6b119ff441e556e1547f80258b0923c9', getversion-instageni-rnoc-gatech-edu-protogeni.json: { 'code_tag': '39c7dc5f6b119ff441e556e1547f80258b0923c9', getversion-lan-sdn-uky-edu-protogeniv2.json: { 'code_tag': '39c7dc5f6b119ff441e556e1547f80258b0923c9', getversion-utahddc-geniracks-net-protogeni.json: { 'code_tag': '39c7dc5f6b119ff441e556e1547f80258b0923c9', }}} Get list of "available" compute resources: {{{ $ omni.py -a ig-utahddc listresources --available -o }}} Reviewed Advertisement RSpec and found 18 exclusive nodes and 12 non-exclusive nodes. Verified that Advertisement RSpec only includes available resources. Created a slice: {{{ $ omni.py createslice IG-CT-1 20:43:10 INFO omni: Loading config file /home/lnevers/.gcf/omni_config 20:43:10 INFO omni: Using control framework portal 20:43:12 INFO omni: Created slice with Name IG-CT-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-1, Expiration 2013-08-21 00:43:11 20:43:12 INFO omni: ------------------------------------------------------------ 20:43:12 INFO omni: Completed createslice: Options as run: framework: portal project: ln-prj Args: createslice IG-CT-1 Result Summary: Created slice with Name IG-CT-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-1, Expiration 2013-08-21 00:43:11 20:43:12 INFO omni: ============================================================ }}} Created a 4 VMs sliver using the RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/UtahDDC/IG-CT-1-utahddc-xen.rspec IG-CT-1-utahddc-xen.rspec]: {{{ $ omni.py createsliver -a ig-utahddc IG-CT-1 IG-CT-1-utahddc-xen.rspec 09:41:27 INFO omni: Loading config file /home/lnevers/.gcf/omni_config 09:41:27 INFO omni: Using control framework portal 09:41:27 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 09:41:28 INFO omni: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-1 expires on 2013-08-21 00:43:11 UTC 09:41:28 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 09:41:28 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 09:41:28 INFO omni: Creating sliver(s) from rspec file IG-CT-1-utahddc-xen.rspec for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-1 09:41:46 INFO omni: (PG log url - look here for details on any failures: https://www.utahddc.geniracks.net/spewlogfile.php3?logfile=22fd94ccf78ecad71d0a379f4dddefa3) 09:41:46 INFO omni: Got return from CreateSliver for slice IG-CT-1 at https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am: 09:41:46 INFO omni: 09:41:46 INFO omni: 09:41:46 INFO omni: ------------------------------------------------------------ 09:41:46 INFO omni: Completed createsliver: Options as run: aggregate: ['ig-utahddc'] framework: portal project: ln-prj Args: createsliver IG-CT-1 IG-CT-1-utahddc-xen.rspec Result Summary: Got Reserved resources RSpec from utahddc-geniracks-net-protogeni 09:41:46 INFO omni: ============================================================ }}} NOTE: Sliver creation took 22 minutes and 5 seconds. The following is login information for the sliver: {{{ $ readyToLogin.py -a ig-utahddc IG-CT-1 <...> User lnevers logs in to xen1 using: ssh -p 31034 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc32.utahddc.geniracks.net User lnevers logs in to xen4 using: ssh -p 31037 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc32.utahddc.geniracks.net User lnevers logs in to xen2 using: ssh -p 31035 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc32.utahddc.geniracks.net User lnevers logs in to xen3 using: ssh -p 31036 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc32.utahddc.geniracks.net }}} === Measurements === Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth: '''Iperf InstaGENI UtahDDC xen2 to xen1 (TCP) ''' ''Collected: 2013-08-14'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 718 MBytes 100 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 144 MBytes 20.2 Mbits/sec [ 4] 0.0-60.1 sec 144 MBytes 20.2 Mbits/sec [ 7] 0.0-60.1 sec 143 MBytes 20.0 Mbits/sec [ 5] 0.0-60.1 sec 143 MBytes 20.0 Mbits/sec [ 6] 0.0-60.1 sec 145 MBytes 20.2 Mbits/sec [SUM] 0.0-60.1 sec 720 MBytes 101 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.1 sec 78.8 MBytes 11.0 Mbits/sec [ 6] 0.0-60.1 sec 78.5 MBytes 11.0 Mbits/sec [ 10] 0.0-60.1 sec 65.9 MBytes 9.19 Mbits/sec [ 7] 0.0-60.1 sec 75.9 MBytes 10.6 Mbits/sec [ 8] 0.0-60.1 sec 75.9 MBytes 10.6 Mbits/sec [ 11] 0.0-60.2 sec 64.6 MBytes 9.01 Mbits/sec [ 9] 0.0-60.2 sec 64.8 MBytes 9.03 Mbits/sec [ 3] 0.0-60.2 sec 78.6 MBytes 11.0 Mbits/sec [ 12] 0.0-60.2 sec 64.6 MBytes 9.01 Mbits/sec [ 4] 0.0-60.2 sec 74.6 MBytes 10.4 Mbits/sec [SUM] 0.0-60.2 sec 722 MBytes 101 Mbits/sec }}} '''Iperf InstaGENI UtahDDC xen2 to the xen1 (UDP) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512765 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 694 MBytes 97.0 Mbits/sec 0.087 ms 17739/512764 (3.5%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UtahDDC xen2 to the xen1 ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 58997ms rtt min/avg/max/mdev = 0.216/0.305/0.448/0.067 ms }}} == IG-CT-2 - Access to New Site bare metal and VM resources == Using Xen for VM resources. Create a slice: {{{ $ omni.py createslice IG-CT-2 10:18:18 INFO omni: Loading config file /home/lnevers/.gcf/omni_config 10:18:18 INFO omni: Using control framework portal 10:18:20 INFO omni: Created slice with Name IG-CT-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-2, Expiration 2013-08-21 14:18:19 10:18:20 INFO omni: ------------------------------------------------------------ 10:18:20 INFO omni: Completed createslice: Options as run: framework: portal project: ln-prj Args: createslice IG-CT-2 Result Summary: Created slice with Name IG-CT-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-2, Expiration 2013-08-21 14:18:19 10:18:20 INFO omni: ============================================================ }}} Created a sliver with one VM and one Raw PC using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/UtahDDC/IG-CT-2-utahddc.rspec IG-CT-2-utahddc.rspec] {{{ $ omni.py createsliver -a ig-utahddc IG-CT-2 IG-CT-2-utahddc.rspec 10:19:06 INFO omni: Loading config file /home/lnevers/.gcf/omni_config 10:19:06 INFO omni: Using control framework portal 10:19:06 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 10:19:07 INFO omni: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-2 expires on 2013-08-21 14:18:19 UTC 10:19:07 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 10:19:07 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 10:19:07 INFO omni: Creating sliver(s) from rspec file IG-CT-2-utahddc.rspec for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-2 10:19:23 INFO omni: (PG log url - look here for details on any failures: https://www.utahddc.geniracks.net/spewlogfile.php3?logfile=f9225785d292017592a7b87c79c7a192) 10:19:23 INFO omni: Got return from CreateSliver for slice IG-CT-2 at https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am: 10:19:23 INFO omni: 10:19:23 INFO omni: 10:19:23 INFO omni: ------------------------------------------------------------ 10:19:23 INFO omni: Completed createsliver: Options as run: aggregate: ['ig-utahddc'] framework: portal project: ln-prj Args: createsliver IG-CT-2 IG-CT-2-utahddc.rspec Result Summary: Got Reserved resources RSpec from utahddc-geniracks-net-protogeni 10:19:23 INFO omni: ============================================================ }}} NOTE: Sliver creation took 2 minutes and 46 seconds. Determined login information: {{{ $ readyToLogin.py -a ig-utahddc IG-CT-2 <...> User lnevers logs in to VM using: ssh -p 30266 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc9.utahddc.geniracks.net User lnevers logs in to PC using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc23.utahddc.geniracks.net }}} === Measurements === Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth: '''Iperf InstaGENI UtahDDC PC to VM (TCP) ''Collected: 2013-08-14'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 712 MBytes 99.5 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.0 sec 143 MBytes 20.0 Mbits/sec [ 3] 0.0-60.1 sec 143 MBytes 20.0 Mbits/sec [ 5] 0.0-60.1 sec 143 MBytes 20.0 Mbits/sec [ 7] 0.0-60.1 sec 144 MBytes 20.1 Mbits/sec [ 4] 0.0-60.1 sec 143 MBytes 20.0 Mbits/sec [SUM] 0.0-60.1 sec 716 MBytes 99.9 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 66.0 MBytes 9.22 Mbits/sec [ 10] 0.0-60.1 sec 75.8 MBytes 10.6 Mbits/sec [ 7] 0.0-60.1 sec 65.9 MBytes 9.19 Mbits/sec [ 8] 0.0-60.1 sec 75.8 MBytes 10.6 Mbits/sec [ 12] 0.0-60.1 sec 76.0 MBytes 10.6 Mbits/sec [ 9] 0.0-60.1 sec 76.0 MBytes 10.6 Mbits/sec [ 5] 0.0-60.2 sec 65.9 MBytes 9.18 Mbits/sec [ 6] 0.0-60.2 sec 66.0 MBytes 9.20 Mbits/sec [ 3] 0.0-60.3 sec 75.9 MBytes 10.6 Mbits/sec [ 11] 0.0-60.3 sec 75.9 MBytes 10.6 Mbits/sec [SUM] 0.0-60.3 sec 719 MBytes 100 Mbits/sec }}} '''Iperf InstaGENI UtahDDC PC to the VM (UDP) {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512822 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 674 MBytes 94.0 Mbits/sec 0.070 ms 32039/512821 (6.2%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UtahDDC PC to VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59000ms rtt min/avg/max/mdev = 0.316/0.361/0.438/0.032 ms }}} '''Iperf InstaGENI UtahDDC VM to PC (TCP) ''Collected: 2013-08-14'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 718 MBytes 100 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 146 MBytes 20.5 Mbits/sec [ 7] 0.0-60.0 sec 132 MBytes 18.5 Mbits/sec [ 4] 0.0-60.1 sec 148 MBytes 20.7 Mbits/sec [ 6] 0.0-60.1 sec 146 MBytes 20.3 Mbits/sec [ 3] 0.0-60.1 sec 145 MBytes 20.2 Mbits/sec [SUM] 0.0-60.1 sec 718 MBytes 100 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.0 sec 79.1 MBytes 11.1 Mbits/sec [ 3] 0.0-60.1 sec 94.6 MBytes 13.2 Mbits/sec [ 11] 0.0-60.1 sec 57.5 MBytes 8.03 Mbits/sec [ 10] 0.0-60.1 sec 86.8 MBytes 12.1 Mbits/sec [ 7] 0.0-60.1 sec 62.8 MBytes 8.76 Mbits/sec [ 8] 0.0-60.2 sec 63.1 MBytes 8.79 Mbits/sec [ 9] 0.0-60.2 sec 47.6 MBytes 6.63 Mbits/sec [ 6] 0.0-60.2 sec 72.1 MBytes 10.0 Mbits/sec [ 5] 0.0-60.3 sec 70.0 MBytes 9.74 Mbits/sec [ 4] 0.0-60.5 sec 84.1 MBytes 11.7 Mbits/sec [SUM] 0.0-60.5 sec 718 MBytes 99.6 Mbits/sec }}} '''Iperf InstaGENI UtahDDC VM to the PC (UDP) {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512757 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 694 MBytes 97.0 Mbits/sec 0.085 ms 17636/512756 (3.4%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UtahDDC VM to PC ''' {{{ + ping 192.168.1.2 -q -c 60 PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data. }}} == IG-CT-3 - Multiple sites experiment == Create a slice using OpenVZ hosts: {{{ $ omni.py createslice IG-CT-3 10:49:14 INFO omni: Loading config file /home/lnevers/.gcf/omni_config 10:49:14 INFO omni: Using control framework portal 10:49:17 INFO omni: Created slice with Name IG-CT-3, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-3, Expiration 2013-08-21 14:49:15 10:49:17 INFO omni: ------------------------------------------------------------ 10:49:17 INFO omni: Completed createslice: Options as run: framework: portal project: ln-prj Args: createslice IG-CT-3 Result Summary: Created slice with Name IG-CT-3, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-3, Expiration 2013-08-21 14:49:15 10:49:17 INFO omni: ============================================================ }}} Create a sliver with one VM at UtahDDC and one VM at GPO using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/UtahDDC/IG-CT-3-utahddc.rspec IG-CT-3-utahddc.rspec]. First created the InstaGENI UtahDDC sliver: {{{ $ omni.py createsliver IG-CT-3 -a ig-utahddc IG-CT-3-utahddc.rspec 10:49:58 INFO omni: Loading config file /home/lnevers/.gcf/omni_config 10:49:58 INFO omni: Using control framework portal 10:49:58 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 10:49:59 INFO omni: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-3 expires on 2013-08-21 14:49:15 UTC 10:49:59 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 10:49:59 INFO omni: Substituting AM nickname ig-utahddc with URL https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am, URN unspecified_AM_URN 10:49:59 INFO omni: Creating sliver(s) from rspec file IG-CT-3-utahddc.rspec for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-3 10:50:14 INFO omni: (PG log url - look here for details on any failures: https://www.utahddc.geniracks.net/spewlogfile.php3?logfile=eddc4d8050c6451dc08c94f2ab5a030f) 10:50:14 INFO omni: Got return from CreateSliver for slice IG-CT-3 at https://utahddc.geniracks.net:12369/protogeni/xmlrpc/am: 10:50:14 INFO omni: 10:50:14 INFO omni: 10:50:14 INFO omni: ------------------------------------------------------------ 10:50:14 INFO omni: Completed createsliver: Options as run: aggregate: ['ig-utahddc'] framework: portal project: ln-prj Args: createsliver IG-CT-3 IG-CT-3-utahddc.rspec Result Summary: Got Reserved resources RSpec from utahddc-geniracks-net-protogeni 10:50:14 INFO omni: ============================================================ }}} Then creates the InstaGENI GPO sliver: {{{ $ omni.py createsliver IG-CT-3 -a ig-gpo IG-CT-3-utahddc.rspec 10:50:24 INFO omni: Loading config file /home/lnevers/.gcf/omni_config 10:50:24 INFO omni: Using control framework portal 10:50:24 INFO omni: Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm 10:50:25 INFO omni: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-3 expires on 2013-08-21 14:49:15 UTC 10:50:25 INFO omni: Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm 10:50:25 INFO omni: Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm 10:50:25 INFO omni: Creating sliver(s) from rspec file IG-CT-3-utahddc.rspec for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-3 10:50:38 INFO omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=fa72cc6d504fc75984d92498959d6ddb) 10:50:38 INFO omni: Got return from CreateSliver for slice IG-CT-3 at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0: 10:50:38 INFO omni: 10:50:38 INFO omni: 10:50:38 INFO omni: ------------------------------------------------------------ 10:50:38 INFO omni: Completed createsliver: Options as run: aggregate: ['ig-gpo'] framework: portal project: ln-prj Args: createsliver IG-CT-3 IG-CT-3-utahddc.rspec Result Summary: Got Reserved resources RSpec from instageni-gpolab-bbn-com 10:50:38 INFO omni: ============================================================ }}} Determined login information at each UtahDDC and GPO aggregate: {{{ $ readyToLogin.py IG-CT-3 -a ig-utahddc .... VM-2's geni_status is: ready (am_status:ready) User lnevers logs in to VM-2 using: ssh -p 30522 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc27.utahddc.geniracks.net $ readyToLogin.py IG-CT-3 -a ig-gpo .... VM-1's geni_status is: ready (am_status:ready) User lnevers logs in to VM-1 using: ssh -p 31802 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI UtahDDC VM-2 to GPO VM-1 (TCP) ''Collected: 2013-08-14'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 425 MBytes 59.4 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 192 MBytes 26.9 Mbits/sec [ 6] 0.0-60.0 sec 85.4 MBytes 11.9 Mbits/sec [ 5] 0.0-60.1 sec 80.9 MBytes 11.3 Mbits/sec [ 4] 0.0-60.1 sec 116 MBytes 16.1 Mbits/sec [ 7] 0.0-60.1 sec 97.1 MBytes 13.5 Mbits/sec [SUM] 0.0-60.1 sec 571 MBytes 79.7 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 66.8 MBytes 9.33 Mbits/sec [ 8] 0.0-60.0 sec 66.1 MBytes 9.24 Mbits/sec [ 11] 0.0-60.1 sec 34.4 MBytes 4.80 Mbits/sec [ 4] 0.0-60.1 sec 64.4 MBytes 8.99 Mbits/sec [ 9] 0.0-60.1 sec 47.9 MBytes 6.68 Mbits/sec [ 12] 0.0-60.2 sec 65.8 MBytes 9.17 Mbits/sec [ 10] 0.0-60.2 sec 59.1 MBytes 8.24 Mbits/sec [ 5] 0.0-60.2 sec 113 MBytes 15.7 Mbits/sec [ 6] 0.0-60.3 sec 60.9 MBytes 8.47 Mbits/sec [ 7] 0.0-60.3 sec 56.9 MBytes 7.91 Mbits/sec [SUM] 0.0-60.3 sec 635 MBytes 88.3 Mbits/sec }}} '''Iperf InstaGENI UtahDDC VM-2 to GPO VM-1 (UDP) {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 599 MBytes 83.7 Mbits/sec 0.046 ms 85230/512820 (17%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UtahDDC VM-2 to GPO VM-1 ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59075ms rtt min/avg/max/mdev = 80.041/91.332/181.627/21.622 ms }}} '''Iperf InstaGENI GPO VM-1 to UtahDDC VM-2 (TCP) ''Collected: 2013-08-14'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 199 MBytes 27.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.0 sec 80.6 MBytes 11.3 Mbits/sec [ 7] 0.0-60.1 sec 83.0 MBytes 11.6 Mbits/sec [ 5] 0.0-60.1 sec 83.0 MBytes 11.6 Mbits/sec [ 3] 0.0-60.1 sec 63.1 MBytes 8.81 Mbits/sec [ 4] 0.0-60.2 sec 87.6 MBytes 12.2 Mbits/sec [SUM] 0.0-60.2 sec 397 MBytes 55.4 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 9] 0.0-60.0 sec 44.9 MBytes 6.27 Mbits/sec [ 11] 0.0-60.1 sec 50.6 MBytes 7.06 Mbits/sec [ 8] 0.0-60.2 sec 40.0 MBytes 5.58 Mbits/sec [ 7] 0.0-60.2 sec 26.8 MBytes 3.73 Mbits/sec [ 4] 0.0-60.2 sec 54.0 MBytes 7.52 Mbits/sec [ 12] 0.0-60.2 sec 48.2 MBytes 6.72 Mbits/sec [ 10] 0.0-60.3 sec 38.0 MBytes 5.28 Mbits/sec [ 3] 0.0-60.4 sec 44.0 MBytes 6.11 Mbits/sec [ 6] 0.0-60.6 sec 35.2 MBytes 4.88 Mbits/sec [ 5] 0.0-60.7 sec 35.4 MBytes 4.89 Mbits/sec [SUM] 0.0-60.7 sec 417 MBytes 57.7 Mbits/sec }}} '''Iperf InstaGENI GPO VM-1 to UtahDDC VM-2 (UDP) {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 531 MBytes 73.9 Mbits/sec 9.099 ms 134296/512818 (26%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM-1 to UtahDDC VM-2 ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59088ms rtt min/avg/max/mdev = 84.420/88.776/113.476/6.498 ms }}} == IG-CT-4 - Multiple sites !OpenFlow experiment and interoperability == First create a slice: {{{ $ omni.py createslice IG-CT-4 ... Result Summary: Created slice with Name IG-CT-4, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-4, Expiration 2013-08-21 17:16:41 }}} Then create slivers at all OpenFlow aggregates. This confirmation test creates a sliver at each of the following aggregates using the RSpec specified. RSpecs can be found [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/UtahDDC here]. {{{ $ omni.py createsliver -a of-nlr IG-CT-4 IG-CT-4-openflow-nlr.rspec -V1 $ omni.py createsliver -a of-i2 IG-CT-4 IG-CT-4-openflow-internet2.rspec -V1 $ omni.py createsliver -a of-gpo IG-CT-4 IG-CT-4-openflow-gpo.rspec -V1 $ omni.py createsliver -a eg-of-gpo IG-CT-4 IG-CT-4-openflow-eg-gpo.rspec -V1 $ omni.py createsliver -a ig-of-gpo IG-CT-4 IG-CT-4-openflow-ig-gpo.rspec -V1 $ omni.py createsliver -a of-uen IG-CT-4 IG-CT-4-openflow-uen.rspec -V1 $ omni.py createsliver -a ig-of-utahddc IG-CT-4 IG-CT-4-openflow-ig-utahddc.rspec -V1 }}} Then create a sliver at each of the compute resource aggregates, RSpecs used can be found RSpecs can be found [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/UtahDDC here]. {{{ $ omni.py createsliver -a pg-utah IG-CT-4 IG-CT-4-pg-utah.rspec $ omni.py createsliver -a ig-gpo IG-CT-4 IG-CT-4-ig-gpo.rspec $ omni.py createsliver -a eg-gpo IG-CT-4 IG-CT-4-eg-gpo.rspec $ omni.py createsliver -a ig-utahddc IG-CT-4 IG-CT-4-ig-utahddc.rspec }}} Determine login for each of compute resources: {{{ $ readyToLogin.py -a ig-utahddc IG-CT-4 <...> User lnevers logs in to utahddc-ig2 using: ssh -p 31291 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc22.utahddc.geniracks.net User lnevers logs in to utahddc-ig using: ssh -p 31290 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc22.utahddc.geniracks.net $ readyToLogin.py -a ig-gpo IG-CT-4 <...> User lnevers logs in to gpo-ig using: ssh -p 35386 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com User lnevers logs in to gpo-ig2 using: ssh -p 35387 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com $ readyToLogin.py -a pg-utah IG-CT-4 <...> User lnevers logs in to utah-pg using: ssh -p 35642 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc533.emulab.net $ readyToLogin.py -a eg-gpo IG-CT-4 <...> User root logs in to VM using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key root@192.1.242.29 }}} === Measurements === This section captures measurements collected between the following endpoints: {{{ 1. InstaGENI UtahDDC VM and InstaGENI UtahDDC VM 2. InstaGENI UtahDDC VM and InstaGENI GPO VM 3. InstaGENI UtahDDC VM and the PG Utah VM 4. InstaGENI UtahDDC VM and ExoGENI GPO VM }}} 1. The measurements collected for InstaGENI UtahDDC VM to the InstaGENI UtahDDC VM: '''Iperf InstaGENI UtahDDC VM to InstaGENI UtahDDC VM (TCP) ''Collected: 2013-08-14'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 9.69 GBytes 1.39 Gbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 7.13 GBytes 1.02 Gbits/sec [ 5] 0.0-60.0 sec 7.13 GBytes 1.02 Gbits/sec [ 6] 0.0-60.0 sec 7.21 GBytes 1.03 Gbits/sec [ 7] 0.0-60.0 sec 6.91 GBytes 989 Mbits/sec [ 3] 0.0-60.0 sec 7.40 GBytes 1.06 Gbits/sec [SUM] 0.0-60.0 sec 35.8 GBytes 5.12 Gbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.0 sec 5.76 GBytes 824 Mbits/sec [ 3] 0.0-60.0 sec 5.96 GBytes 853 Mbits/sec [ 5] 0.0-60.0 sec 5.88 GBytes 842 Mbits/sec [ 6] 0.0-60.0 sec 5.99 GBytes 858 Mbits/sec [ 4] 0.0-60.0 sec 6.03 GBytes 863 Mbits/sec [ 7] 0.0-60.0 sec 6.14 GBytes 878 Mbits/sec [ 9] 0.0-60.0 sec 6.08 GBytes 871 Mbits/sec [ 11] 0.0-60.0 sec 6.09 GBytes 871 Mbits/sec [ 8] 0.0-60.0 sec 6.19 GBytes 886 Mbits/sec [ 10] 0.0-60.0 sec 5.91 GBytes 846 Mbits/sec [SUM] 0.0-60.0 sec 60.0 GBytes 8.59 Gbits/sec }}} '''Iperf InstaGENI UtahDDC VM to the InstaGENI UtahDDC VM (UDP) {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec 0.000 ms 0/512820 (0%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UtahDDC VM to the InstaGENI UtahDDC VM''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 58999ms rtt min/avg/max/mdev = 0.037/0.045/0.069/0.005 ms }}} 2. The measurements collected for InstaGENI UtahDDC VM to the InstaGENI GPO VM: '''Iperf InstaGENI UtahDDC VM to the InstaGENI GPO VM (TCP) ''Collected: 2013-08-14'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 197 MBytes 27.5 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-59.8 sec 102 MBytes 14.2 Mbits/sec [ 5] 0.0-60.0 sec 67.9 MBytes 9.49 Mbits/sec [ 7] 0.0-60.0 sec 67.6 MBytes 9.45 Mbits/sec [ 4] 0.0-60.1 sec 102 MBytes 14.3 Mbits/sec [ 6] 0.0-60.4 sec 61.5 MBytes 8.54 Mbits/sec [SUM] 0.0-60.4 sec 401 MBytes 55.7 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-59.5 sec 65.9 MBytes 9.28 Mbits/sec [ 4] 0.0-59.5 sec 48.9 MBytes 6.89 Mbits/sec [ 7] 0.0-59.8 sec 50.8 MBytes 7.11 Mbits/sec [ 12] 0.0-59.9 sec 34.8 MBytes 4.86 Mbits/sec [ 8] 0.0-60.0 sec 29.5 MBytes 4.13 Mbits/sec [ 6] 0.0-60.0 sec 41.4 MBytes 5.79 Mbits/sec [ 10] 0.0-60.0 sec 34.6 MBytes 4.84 Mbits/sec [ 5] 0.0-60.0 sec 31.2 MBytes 4.37 Mbits/sec [ 9] 0.0-60.2 sec 33.9 MBytes 4.72 Mbits/sec [ 11] 0.0-60.2 sec 38.9 MBytes 5.41 Mbits/sec [SUM] 0.0-60.2 sec 410 MBytes 57.1 Mbits/sec }}} '''Iperf InstaGENI UtahDDC VM to the InstaGENI GPO VM (UDP) {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-58.1 sec 592 MBytes 85.4 Mbits/sec 0.086 ms 90657/512820 (18%) [ 3] 0.0-58.1 sec 535 datagrams received out-of-order }}} '''Ping from InstaGENI UtahDDC VM to the InstaGENI GPO VM''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59061ms rtt min/avg/max/mdev = 267.270/371.055/3216.609/474.816 ms, pipe 4 }}} 3. The measurements collected for InstaGENI UtahDDC VM to the PG Utah VM ''Collected: 2013-08-14'' '''Iperf InstaGENI UtahDDC VM to the PG Utah VM (TCP) __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 6.39 GBytes 915 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-59.8 sec 1.40 GBytes 201 Mbits/sec [ 6] 0.0-59.8 sec 1.34 GBytes 193 Mbits/sec [ 3] 0.0-59.8 sec 1.08 GBytes 155 Mbits/sec [ 5] 0.0-60.0 sec 1.45 GBytes 208 Mbits/sec [ 7] 0.0-60.0 sec 1.12 GBytes 161 Mbits/sec [SUM] 0.0-60.0 sec 6.40 GBytes 916 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-59.9 sec 658 MBytes 92.1 Mbits/sec [ 4] 0.0-59.9 sec 635 MBytes 88.9 Mbits/sec [ 3] 0.0-59.9 sec 681 MBytes 95.3 Mbits/sec [ 9] 0.0-59.9 sec 624 MBytes 87.4 Mbits/sec [ 8] 0.0-59.9 sec 661 MBytes 92.5 Mbits/sec [ 7] 0.0-59.9 sec 718 MBytes 100 Mbits/sec [ 6] 0.0-60.0 sec 655 MBytes 91.6 Mbits/sec [ 10] 0.0-60.0 sec 671 MBytes 93.8 Mbits/sec [ 12] 0.0-60.0 sec 619 MBytes 86.5 Mbits/sec [ 11] 0.0-60.0 sec 630 MBytes 88.0 Mbits/sec [SUM] 0.0-60.0 sec 6.40 GBytes 916 Mbits/sec }}} '''Iperf InstaGENI UtahDDC VM to the PG Utah VM (UDP) {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-59.8 sec 717 MBytes 101 Mbits/sec 0.005 ms 1651/512820 (0.32%) [ 3] 0.0-59.8 sec 23 datagrams received out-of-order }}} '''Ping from InstaGENI UtahDDC VM to the PG Utah VM''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59000ms rtt min/avg/max/mdev = 0.284/7.791/446.129/57.066 ms }}} 4. The measurements collected for InstaGENI UtahDDC VM to the ExoGENI GPO VM: '''Iperf InstaGENI UtahDDC VM to the ExoGENI RENCI VM (TCP) ''Collected: 2013-08-14'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.3 sec 29.4 MBytes 4.08 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-59.9 sec 28.0 MBytes 3.92 Mbits/sec [ 4] 0.0-60.3 sec 28.1 MBytes 3.91 Mbits/sec [ 7] 0.0-60.4 sec 27.1 MBytes 3.77 Mbits/sec [ 6] 0.0-60.4 sec 28.2 MBytes 3.92 Mbits/sec [ 5] 0.0-60.4 sec 26.6 MBytes 3.70 Mbits/sec [SUM] 0.0-60.4 sec 138 MBytes 19.2 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-59.5 sec 26.2 MBytes 3.70 Mbits/sec [ 3] 0.0-59.5 sec 28.8 MBytes 4.05 Mbits/sec [ 6] 0.0-59.8 sec 28.9 MBytes 4.05 Mbits/sec [ 5] 0.0-59.8 sec 27.9 MBytes 3.91 Mbits/sec [ 7] 0.0-60.0 sec 28.0 MBytes 3.92 Mbits/sec [ 9] 0.0-60.1 sec 26.8 MBytes 3.74 Mbits/sec [ 8] 0.0-60.2 sec 26.9 MBytes 3.75 Mbits/sec [ 10] 0.0-60.3 sec 25.9 MBytes 3.60 Mbits/sec [ 11] 0.0-60.3 sec 29.1 MBytes 4.05 Mbits/sec [ 12] 0.0-60.3 sec 26.4 MBytes 3.67 Mbits/sec [SUM] 0.0-60.3 sec 275 MBytes 38.2 Mbits/sec }}} '''Iperf InstaGENI UtahDDC VM to the ExoGENI RENCI VM (UDP) {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-58.0 sec 588 MBytes 85.0 Mbits/sec 0.108 ms 93406/512820 (18%) [ 3] 0.0-58.0 sec 477 datagrams received out-of-order }}} '''Ping from InstaGENI UtahDDC VM to the ExoGENI GPO VM''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59086ms rtt min/avg/max/mdev = 267.523/353.559/2956.748/415.388 ms, pipe 3 }}} == IG-CT-5 - Experiment Monitoring == Reviewed content of the GMOC Monitoring page for [https://gmoc-db.grnoc.iu.edu/protected-openid/index.pl?method=aggregates aggregates], and found both Compute Resources and FOAM aggregates. [[Image(UtahDDC-aggregate.jpg)]] Verified that the Utah DDC compute resources aggregate shows up in the list of aggregates and provides Aggregate Name, Type, Last Update, Version, POP, and Organization: [[Image(UtahDDC-aggregate-detail.jpg)]] Active slivers: [[Image(UtahDDC-sliver.jpg)]] List of resources: [[Image(UtahDDC-resources.jpg)]] Aggregate measurements: [[Image(UtahDDC-measure.jpg)]] The UtahDDC InstaGENI FOAM resources aggregate details: [[Image(UtahDDC-FOAMAggregate.jpg)]] Active !OpenFlow Slivers: [[Image(UtahDDC-OFSlivers.jpg)]] List of !OpenFlow Resources in use: [[Image(UtahDDC-OFResources.jpg)]] Monitoring shows Aggregate measurement for CPU utilization, Disk Utilization, Network Statistics and OF Datapath and Sliver Statistics: [[Image(UtahDDC-OFMonitoring.jpg)]] == IG-CT-6 - Administrative Tests == Sent request for administrative account to site contact. Site contact should be from the [http://groups.geni.net/geni/wiki/GeniAggregate/UtahDDCInstaGENI UtahDDC InstaGENI] aggregate page, but page does not exist yet. See instaticket:124. Followed instructions at [https://users.emulab.net/trac/protogeni/wiki/RackAdminAccounts Admin Accounts on InstaGeni Racks] page for account request. A local admin account was create for the ''emulab-ops'' group at [https://www.utahddc.geniracks.net/joinproject.php3?target_pid=emulab-ops join group] page. Once the administrative account was created and membership to emulab-ops was approved, proceeded to execute administrative tests. {{{ LNM:~$ ssh control.utahddc.geniracks.net Welcome to Ubuntu precise (development branch) (GNU/Linux 3.2.0-23-generic x86_64) .... lnevers@control:~$ sudo whoami root lnevers@control:~$ }}} Also access the boss node: {{{ LNM:~$ ssh control.utahddc.geniracks.net Permission denied (publickey). LNM:~$ ssh boss.utahddc.geniracks.net Last login: Fri Aug 16 07:07:22 2013 from dhcp89-073-116.bbn.com FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Tue Apr 30 14:24:36 MDT 2013 Welcome to FreeBSD! To determine whether a file is a text file, executable, or some other type of file, use file filename -- Dru [lnevers@boss ~]$ sudo whoami root [lnevers@boss ~]$ }}} From boss node accessed each of the experiment nodes that support VMs: {{{ [lnevers@boss ~]$ for i in pc1 pc2 pc3 pc4 pc5 pc6 pc7 pc8 pc9 pc10 pc11 pc12; do ssh $i "echo -n '===> Host: ';hostname;sudo whoami;uname -a;echo"; done Warning: Permanently added 'pc1.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost1.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost1.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc2.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost2.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost2.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc3.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost3.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost3.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc4.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost4.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost4.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc5.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost5.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost5.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc6.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost6.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost6.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc7.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost7.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost7.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc8.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost8.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost8.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc9.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost9.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost9.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc10.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost10.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost10.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc11.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost11.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost11.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc12.utahddc.geniracks.net' (RSA) to the list of known hosts. ===> Host: vhost12.shared-nodes.emulab-ops.utahddc.geniracks.net root Linux vhost12.shared-nodes.emulab-ops.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux [lnevers@boss ~]$ }}} In order to access Dedicated Nodes some experiment must be running on the raw-pc device. At the time of this capture, four raw-pc nodes were in use (pc22, pc23, pc27 and pc32): {{{ [lnevers@boss ~]$ sudo ssh pc22 [root@pc22 ~]# sudo whoami root [root@pc22 ~]# uname -a Linux pc22.ig-ct-4.ch-geni-net.utahddc.geniracks.net 2.6.32-042stab049.6.emulab.1 #1 SMP Mon May 21 14:36:04 MDT 2012 x86_64 x86_64 x86_64 GNU/Linux [root@pc22 ~]# exit logout Connection to pc22.utahddc.geniracks.net closed. [lnevers@boss ~]$ sudo ssh pc23 [root@pc ~]# sudo whoami root [root@pc ~]# uname -a Linux pc.ig-ct-2.ch-geni-net.utahddc.geniracks.net 2.6.40-4.emulab2.fc15.i686.PAE #1 SMP Tue Feb 26 13:35:12 MST 2013 i686 i686 i386 GNU/Linux [root@pc ~]# exit logout Connection to pc23.utahddc.geniracks.net closed. [lnevers@boss ~]$ sudo ssh pc27 [root@pc27 ~]# sudo whoami root [root@pc27 ~]# uname -a Linux pc27.ig-ct-3.ch-geni-net.utahddc.geniracks.net 2.6.32-042stab049.6.emulab.1 #1 SMP Mon May 21 14:36:04 MDT 2012 x86_64 x86_64 x86_64 GNU/Linux [root@pc27 ~]# exit logout Connection to pc27.utahddc.geniracks.net closed. [lnevers@boss ~]$ sudo ssh pc32 Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.46 x86_64) * Documentation: https://help.ubuntu.com/ root@pc32:~# sudo whoami root root@pc32:~# uname -a Linux pc32.ig-ct-1.ch-geni-net.utahddc.geniracks.net 3.2.46 #1 SMP Wed Jun 5 15:53:18 MDT 2013 x86_64 x86_64 x86_64 GNU/Linux root@pc32:~# exit logout Connection to pc32.utahddc.geniracks.net closed. [lnevers@boss ~]$ }}} Further verified access by ssh from ops.instageni.gpolab.bbn.com to boss.instageni.gpolab.bbn.com, which is usually restricted for non-admin users: {{{ LNM:~$ ssh ops.utahddc.geniracks.net Last login: Fri Aug 16 07:06:53 2013 from dhcp89-073-116.bbn.com FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Tue Apr 30 14:24:36 MDT 2013 Welcome to FreeBSD! To quickly create an empty file, use "touch filename". -- Dru [lnevers@ops ~]$ sudo whoami root [lnevers@ops ~]$ ssh boss The authenticity of host 'boss.utahddc.geniracks.net (155.99.144.4)' can't be established. ECDSA key fingerprint is bd:05:23:a7:5b:cc:78:c8:8c:a8:d3:e9:f7:27:53:cb. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'boss.utahddc.geniracks.net' (ECDSA) to the list of known hosts. Last login: Fri Aug 16 07:19:02 2013 from dhcp89-073-116.bbn.com FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Tue Apr 30 14:24:36 MDT 2013 Welcome to FreeBSD! To see the last 10 lines of a long file, use "tail filename". To see the first 10 lines, use "head filename". -- Dru [lnevers@boss ~]$ exit exit logout Connection to boss.utahddc.geniracks.net closed. [lnevers@ops ~]$ exit logout Connection to ops.utahddc.geniracks.net closed. }}} Access infrastructure Switches using documented password. First connect to the switch named procurve1 the control network switch: {{{ [lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd XXXXXXXXX [lnevers@boss ~]$ telnet procurve1 HP J8697A Switch E5406zl Software revision K.15.06.0017 Copyright (C) 1991-2012 Hewlett-Packard Development Company, L.P. RESTRICTED RIGHTS LEGEND Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P. 20555 State Highway 249, Houston, TX 77070 We'd like to keep you up to date about: * Software feature updates * New product announcements * Special events Please register your products now at: www.hp.com/networking/register Username: manager Password: ddc-procurve1# ddc-procurve1# show version Image stamp: /ws/swbuildm/ec_rel_eureka_qaoff/code/build/btm(ec_rel_eureka_qaoff) Apr 20 2012 12:34:21 K.15.06.0017 13 Boot Image: Primary ddc-procurve1# show running-config Running configuration: ; J8697A Configuration Editor; Created on release #K.15.06.0017 ; Ver #02:10.0d:1f hostname "ddc-procurve1" module 1 type J9534A module 2 type J9536A module 3 type J9550A module 4 type J9536A ip default-gateway 10.1.1.254 vlan 1 name "DEFAULT_VLAN" untagged A1,A4-A24,B1-B22,C1-C24,D1-D22 ip address 10.254.254.254 255.255.255.0 no untagged A2-A3 ip igmp exit vlan 11 name "control-alternate" untagged A3 ip address 10.2.1.253 255.255.255.0 exit vlan 10 name "control-hardware" untagged A2 ip address 10.1.1.253 255.255.255.0 exit no web-management ip authorized-managers 10.1.1.1 255.255.255.0 access manager snmp-server community "xxxx" unrestricted aaa authentication ssh login public-key aaa authentication ssh enable public-key management-vlan 10 no tftp server no autorun no dhcp config-file-update no dhcp image-file-update password xxx password xxx ddc-procurve1# show vlans Status and Counters - VLAN Information Maximum VLANs to support : 256 Primary VLAN : DEFAULT_VLAN Management VLAN : control-hardware VLAN ID Name | Status Voice Jumbo ------- -------------------------------- + ---------- ----- ----- 1 DEFAULT_VLAN | Port-based No No 10 control-hardware | Port-based No No 11 control-alternate | Port-based No No ddc-procurve1# exit ddc-procurve1> exit Do you want to log out [y/n]? y Connection closed by foreign host. [lnevers@boss ~]$ }}} Connect to the switch named procurve2 the dataplane network switch via ssh using the documented password: {{{ [lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd xxxxxxx [lnevers@boss ~]$ telnet procurve2 Trying 10.3.1.253... Connected to procurve2. Escape character is '^]'. HP J8697A Switch E5406zl Software revision K.15.06.5008 Copyright (C) 1991-2012 Hewlett-Packard Development Company, L.P. RESTRICTED RIGHTS LEGEND Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P. 20555 State Highway 249, Houston, TX 77070 We'd like to keep you up to date about: * Software feature updates * New product announcements * Special events Please register your products now at: www.hp.com/networking/register Username: manager Password: ddc-es-tor-q15-1# show version Image stamp: /ws/swbuildm/of_bridge_qaoff/code/build/btm(of_bridge_qaoff) Feb 18 2012 11:26:28 K.15.06.5008 79 Boot Image: Primary ddc-es-tor-q15-1# show running-config Running configuration: ; J8697A Configuration Editor; Created on release #K.15.06.5008 ; Ver #02:10.0d:1f hostname "ddc-es-tor-q15-1" max-vlans 2048 module 1 type J9534A module 2 type J9548A module 3 type J9535A module 4 type J9550A module 5 type J9550A module 6 type J9534A interface A1 name "CHPC Managment - note VLAN Translation" exit interface A4 speed-duplex auto-1000 exit interface A5 speed-duplex auto-1000 exit interface A6 speed-duplex auto-1000 exit interface A7 speed-duplex auto-1000 exit interface A8 speed-duplex auto-1000 exit interface A9 speed-duplex auto-1000 exit interface A10 speed-duplex auto-1000 exit interface A11 speed-duplex auto-1000 exit interface A12 speed-duplex auto-1000 exit interface B1 speed-duplex auto-1000 exit interface B2 speed-duplex auto-1000 exit interface B3 speed-duplex auto-1000 exit interface B4 speed-duplex auto-1000 exit interface B5 speed-duplex auto-1000 exit interface B6 speed-duplex auto-1000 exit interface B7 speed-duplex auto-1000 exit interface B8 speed-duplex auto-1000 exit interface B9 speed-duplex auto-1000 exit interface B10 speed-duplex auto-1000 exit interface B11 speed-duplex auto-1000 exit interface B12 speed-duplex auto-1000 exit interface B13 speed-duplex auto-1000 exit interface B14 speed-duplex auto-1000 exit interface B15 speed-duplex auto-1000 exit interface B16 speed-duplex auto-1000 exit interface B17 speed-duplex auto-1000 exit interface B18 speed-duplex auto-1000 exit interface B22 name "procurve-pgeni-uen port b22" exit interface D1 speed-duplex auto-1000 exit interface D2 speed-duplex auto-1000 exit interface D3 speed-duplex auto-1000 exit interface D4 speed-duplex auto-1000 exit interface D5 speed-duplex auto-1000 exit interface D6 speed-duplex auto-1000 exit interface D7 speed-duplex auto-1000 exit interface D8 speed-duplex auto-1000 exit interface D9 speed-duplex auto-1000 exit interface D13 disable speed-duplex auto-1000 exit interface D15 disable speed-duplex auto-1000 exit interface D21 disable speed-duplex auto-1000 exit interface D23 disable speed-duplex auto-1000 exit interface D24 disable speed-duplex auto-1000 exit interface E1 disable speed-duplex auto-1000 exit interface E4 disable speed-duplex auto-1000 exit interface E5 disable speed-duplex auto-1000 exit interface E6 disable speed-duplex auto-1000 exit interface E7 disable speed-duplex auto-1000 exit interface E8 disable speed-duplex auto-1000 exit interface E9 disable speed-duplex auto-1000 exit interface E13 speed-duplex auto-1000 exit interface E16 speed-duplex auto-1000 exit interface E17 disable speed-duplex auto-1000 exit interface E18 disable speed-duplex auto-1000 exit interface E22 disable speed-duplex auto-1000 exit interface E23 disable speed-duplex auto-1000 exit interface E24 disable speed-duplex auto-1000 exit interface F7 disable speed-duplex auto-1000 exit interface F13 disable speed-duplex auto-1000 exit interface F16 disable speed-duplex auto-1000 exit interface F19 disable speed-duplex auto-1000 exit ip default-gateway 10.240.0.1 vlan 1 name "DEFAULT_VLAN" forbid A4-A12,B1-B18,D1-D9 untagged A3,A13-A24,B19-B21,C1-C24,D10-D24,E1-E12,E14-E15,E17-E24,F1-F24 no untagged A1-A2,A4-A12,B1-B18,B22,D1-D9,E13,E16 no ip address exit vlan 2 name "CHPC_Management" untagged A1 ip address 10.240.0.5 255.255.254.0 jumbo exit vlan 10 name "control-hardware" untagged A2 ip address 10.3.1.253 255.255.255.0 jumbo exit vlan 1750 name "_9" tagged B22,E13 no ip address exit vlan 257 name "_14" untagged A4-A12,B1-B18,D1-D9 no ip address exit vlan 258 name "_17" tagged A4,A7,A10,B1,B4,B7,B10,B13,B16,D1,D4,D7 no ip address exit vlan 259 name "_33" tagged B16,E16 no ip address exit no web-management ip dns server-address priority 1 155.101.3.11 ip dns server-address priority 2 155.101.3.12 openflow vlan 1750 enable controller "tcp:10.3.1.7:6633" fail-secure on exit exit snmp-server community "xxx" unrestricted aaa authentication ssh login public-key aaa authentication ssh enable public-key management-vlan 10 no autorun no dhcp config-file-update no dhcp image-file-update password xxx password xxx ddc-es-tor-q15-1# show vlans Status and Counters - VLAN Information Maximum VLANs to support : 2048 Primary VLAN : DEFAULT_VLAN Management VLAN : control-hardware VLAN ID Name | Status Voice Jumbo ------- -------------------------------- + ---------- ----- ----- 1 DEFAULT_VLAN | Port-based No No 2 CHPC_Management | Port-based No Yes 10 control-hardware | Port-based No Yes 257 _14 | Port-based No No 258 _17 | Port-based No No 259 _33 | Port-based No No 1750 _9 | Port-based No No ddc-es-tor-q15-1# show vlans 1750 Status and Counters - VLAN Information - VLAN 1750 VLAN ID : 1750 Name : _9 Status : Port-based Voice : No Jumbo : No Port Information Mode Unknown VLAN Status ---------------- -------- ------------ ---------- B22 Tagged Learn Up E13 Tagged Learn Up ddc-es-tor-q15-1# exit ddc-es-tor-q15-1> exit Do you want to log out [y/n]? Connection closed by foreign host. }}} Access the FOAM VM and gather information for version {{{ LNM:~$ ssh foam.utahddc.geniracks.net Welcome to Ubuntu 12.04.2 LTS (GNU/Linux 3.2.0-51-generic x86_64) ... lnevers@foam:~$ sudo foamctl admin:get-version --passwd-file=/etc/foam.passwd { "version": "0.12.0" } lnevers@foam:~$ }}} Check FOAM configuration for site.admin.email, geni.site-tag, email.from settings: {{{ lnevers@foam:~$ foamctl config:get-value --key="site.admin.email" --passwd-file=/etc/foam.passwd { "value": null } lnevers@foam:~$ foamctl config:get-value --key="geni.site-tag" --passwd-file=/etc/foam.passwd { "value": "foam.utahddc.geniracks.net" } lnevers@foam:~$ foamctl config:get-value --key="email.from" --passwd-file=/etc/foam.passwd { "value": "stoller@flux.utah.edu" } lnevers@foam:~$ foamctl config:get-value --key="email.from" --passwd-file=/etc/foam.passwd { "value": "stoller@flux.utah.edu" } lnevers@foam:~$ foamctl config:get-value --key="geni.approval.approve-on-creation" --passwd-file=/etc/foam.passwd { "value": 2 } }}} Show FOAM slivers and details for one sliver: {{{ lnevers@foam:~$ foamctl geni:list-slivers --passwd-file=/etc/foam.passwd { "slivers": [ { "status": "approved", "flowvisor_slice": "66224f75-e941-40c8-844b-ed43e7c1feeb", "slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tuptymon", "pend_reason": [], "deleted": "False", "user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+tupty", "creation": "2013-08-13 21:48:32.067376+00:00", "enabled": true, "uuid": "66224f75-e941-40c8-844b-ed43e7c1feeb", "id": 3, "expiration": "2013-10-10 00:00:00+00:00", "sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tuptymon:66224f75-e941-40c8-844b-ed43e7c1feeb", "ref": null, "email": "tupty@pgeni.gpolab.bbn.com", "desc": "tuptymon OpenFlow resources at UEN InstaGENI." }, { "status": "approved", "flowvisor_slice": "af6fa175-e927-479d-982d-72a2a81124c9", "slice_urn": "urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-4", "pend_reason": [], "deleted": "False", "user": "urn:uuid:5702673f-cc62-4729-9efd-3b7bd3db4bc9", "creation": "2013-08-14 17:27:09.045538+00:00", "enabled": true, "uuid": "af6fa175-e927-479d-982d-72a2a81124c9", "id": 4, "expiration": "2013-08-21 17:16:41+00:00", "sliver_urn": "urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-CT-4:af6fa175-e927-479d-982d-72a2a81124c9", "ref": null, "email": "lnevers@bbn.com", "desc": "New Site Confirmation Test IG-CT-4 " } ] } lnevers@foam:~$ }}} Access the FlowVisor VM and gather version information: {{{ LNM:~$ ssh flowvisor.utahddc.geniracks.net Welcome to Ubuntu 12.04.2 LTS (GNU/Linux 3.2.0-51-generic x86_64) .. lnevers@flowvisor:~$ sudo whoami root }}} Check the !FlowVisor version, list of devices, get details for a device, list of active slices, and details for one of the slices: {{{ lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd ping hello Got reply: PONG(fvadmin): FV version=flowvisor-0.8.17::hello # Devices lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listDevices Device 0: 06:d6:24:be:05:fe:43:00 lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listDevices Device 0: 06:d6:24:be:05:fe:43:00 lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd getDeviceInfo 06:d6:24:be:05:fe:43:00 nPorts=4 portList=46,65534,37,109 dpid=06:d6:24:be:05:fe:43:00 remote=/10.3.1.7:6633-->/10.3.1.253:55760 portNames=B22(46),local(65534),B13(37),E13(109) #Slices lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listSlices Slice 0: fvadmin Slice 1: 66224f75-e941-40c8-844b-ed43e7c1feeb Slice 2: af6fa175-e927-479d-982d-72a2a81124c9 lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd getSliceInfo af6fa175-e927-479d-982d-72a2a81124c9 Got reply: drop_policy=exact connection_1=06:d6:24:be:05:fe:43:00-->/155.99.144.7:40575-->mallorea.gpolab.bbn.com/192.1.249.185:33020 contact_email=lnevers@bbn.com controller_hostname=mallorea.gpolab.bbn.com controller_port=33020 creator=fvadmin lnevers@flowvisor:~$ }}} Check the FlowVisor setting: {{{ lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd dumpConfig /tmp/flowvisor-config lnevers@flowvisor:~$ more /tmp/flowvisor-config { "flowvisor": [ { "api_webserver_port": 8080, "api_jetty_webserver_port": -1, "checkpointing": false, "listen_port": 6633, "track_flows": false, "stats_desc_hack": false, "run_topology_server": false, "logging": "NOTE", "log_ident": "flowvisor", "log_facility": "LOG_LOCAL7", "version": "flowvisor-0.9", "host": "localhost", "default_flood_perm": "fvadmin", "config_name": "default" } ], "Slice": [ { "config_name": "default", "flowmap_type": "federated", "name": "fvadmin", "creator": "fvadmin", "passwd_crypt": "xxx", "passwd_salt": "xxx", "controller_hostname": "none", "controller_port": 0, "contact_email": "fvadmin@localhost", "drop_policy": "exact", "lldp_spam": true }, { "config_name": "default", "flowmap_type": "federated", "name": "66224f75-e941-40c8-844b-ed43e7c1feeb", "creator": "fvadmin", "passwd_crypt": "a607b328e60906ee1dab40b0e75d0f89", "passwd_salt": "926389911", "controller_hostname": "naxos.gpolab.bbn.com", "controller_port": 31750, "contact_email": "tupty@pgeni.gpolab.bbn.com", "drop_policy": "exact", "lldp_spam": true }, { "config_name": "default", "flowmap_type": "federated", "name": "af6fa175-e927-479d-982d-72a2a81124c9", "creator": "fvadmin", "passwd_crypt": "1e548deddb524a1e5140da0ceefa68b6", "passwd_salt": "-515041710", "controller_hostname": "mallorea.gpolab.bbn.com", "controller_port": 33020, "contact_email": "lnevers@bbn.com", "drop_policy": "exact", "lldp_spam": true } ], "FlowSpaceRule": [ { "dpid": "6d624be05fe4300", "priority": 2000, "in_port": 0, "dl_type": 2048, "nw_src": 171048960, "nw_dst": 171048960, "wildcards": 3412207, "slice_action": [ { "66224f75-e941-40c8-844b-ed43e7c1feeb": 4 } ] }, { "dpid": "6d624be05fe4300", "priority": 2000, "in_port": 0, "dl_type": 2054, "nw_src": 171048960, "nw_dst": 171048960, "wildcards": 3412207, "slice_action": [ { "66224f75-e941-40c8-844b-ed43e7c1feeb": 4 } ] }, { "dpid": "6d624be05fe4300", "priority": 2000, "in_port": 0, "dl_type": 2048, "nw_src": 170527488, "nw_dst": 170527488, "wildcards": 3279087, "slice_action": [ { "af6fa175-e927-479d-982d-72a2a81124c9": 4 } ] }, { "dpid": "6d624be05fe4300", "priority": 2000, "in_port": 0, "dl_type": 2054, "nw_src": 170527488, "nw_dst": 170527488, "wildcards": 3279087, "slice_action": [ { "af6fa175-e927-479d-982d-72a2a81124c9": 4 } ] } ] } }}} Verify alerts for the compute resource Aggregate Manager are being reported to the [http://monitor.gpolab.bbn.com/nagios/cgi-bin/status.cgi GPO Tango GENI Nagios monitoring] and that the majority of alerts have a status of "OK". Other statuses may be encountered and are verified with activities, outages or known issues for the site. [[Image(UtahDDC-nagios.jpg)]] Verify alerts for the FOAM Aggregate Manager are being reported to the [http://monitor.gpolab.bbn.com/nagios/cgi-bin/status.cgi GPO Tango GENI Nagios monitoring] and that the majority of alerts have a status of "OK". Other statuses may be encountered and are verified with activities, outages or known issues for the site. [[Image(UtahDDC-OF-nagios.jpg)]] ---- {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}