wiki:GENIRacksHome/InstageniRacks/ConfirmationTestStatus/Utah

Version 8 (modified by lnevers@bbn.com, 11 years ago) (diff)

--

Utah InstaGENI Confirmation Tests

For details about the tests in this page, see the InstaGENI Confirmation Tests page.
For site status see the InstaGENI New Site Confirmation Tests Status page.

Note: The Utah InstaGENI site aggregate was aliased to the Omni nick_name ig-utah and is used for all confirmation tests captured on this page. The ig-utah alias maps to http://utah.geniracks.net/protogeni/xmlrpc/am/2.0.

IG-CT-1 - Access to New Site VM resources

Got Aggregate version, which showed AM API V1, V2, and V3 are supported and V2 is default. The InstaGENI version is "'code_tag':'d3db680464a799eaa6d43644e8ddd027e562a291'".

$ omni.py getversion -a ig-utah 
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:AM URN: unspecified_AM_URN (url: http://utah.geniracks.net/protogeni/xmlrpc/am/2.0) has version: (protogeni AM code: 0 (PG error log: urn:publicid:IDN+utah.geniracks.net+log+20068).)
INFO:omni:{   'code_tag': 'd3db680464a799eaa6d43644e8ddd027e562a291',
    'geni_ad_rspec_versions': [   {   'extensions': [],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/0.1',
                                      'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '0.1'},
                                  {   'extensions': [],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/0.2',
                                      'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '0.2'},
                                  {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/2',
                                      'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '2'},
                                  {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                      'namespace': 'http://www.geni.net/resources/rspec/3',
                                      'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd',
                                      'type': 'GENI',
                                      'version': '3'}],
    'geni_api': 2,
    'geni_api_versions': {   '1': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/1.0',
                             '2': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0',
                             '3': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0'},
    'geni_request_rspec_versions': [   {   'extensions': [],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/0.1',
                                           'schema': 'http://www.protogeni.net/resources/rspec/0.1/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '0.1'},
                                       {   'extensions': [],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/0.2',
                                           'schema': 'http://www.protogeni.net/resources/rspec/0.2/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '0.2'},
                                       {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/2',
                                           'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '2'},
                                       {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                           'namespace': 'http://www.geni.net/resources/rspec/3',
                                           'schema': 'http://www.geni.net/resources/rspec/3/request.xsd',
                                           'type': 'GENI',
                                           'version': '3'}],
    'hostname': 'boss.utah.geniracks.net',
    'hrn': 'utahgenirack.cm',
    'interface': 'aggregate',
    'url': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am',
    'urn': 'urn:publicid:IDN+utah.geniracks.net+authority+cm'}
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed getversion:
  Options as run:
		aggregate: ['ig-utah']
		framework: pg
		noGetVersionCache: True

  Args: getversion
  Result Summary: 
Got version for http://utah.geniracks.net/protogeni/xmlrpc/am/2.0
 
INFO:omni: ============================================================

Got a listresources of "available" resources only:

$ omni.py listresources -a ig-utah --available -o
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Saving output to a file.
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Listed resources on 1 out of 1 possible aggregates.
INFO:omni:Writing to 'rspec-utah-geniracks-net-protogeniv2.xml'
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed listresources:

  Options as run:
		aggregate: ['ig-utah']
		framework: pg
		geni_available: True
		output: True

  Args: listresources

  Result Summary: Queried resources from 1 of 1 aggregate(s).
Wrote rspecs from 1 aggregate(s) to 1 file(s)
Saved listresources RSpec at 'unspecified_AM_URN' (url 'http://utah.geniracks.net/protogeni/xmlrpc/am/2.0') to file rspec-utah-geniracks-net-protogeniv2.xml;  
INFO:omni: ============================================================

Created a slice:

$ omni.py createslice IG-CT-1
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Created slice with Name IG-CT-1, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-1, Expiration 2012-11-02 16:37:46+00:00
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createslice:
  Options as run:
		framework: pg

  Args: createslice IG-CT-1
  Result Summary: Created slice with Name IG-CT-1, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-1, Expiration 2012-11-02 16:37:46+00:00
 
INFO:omni: ============================================================

Created a 4 VMs sliver using the RSpec IG-CT-1-utah.rspec:

$ omni.py createsliver -a ig-utah IG-CT-1 IG-CT-1-utah.rspec 
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-1 expires within 1 day on 2012-11-02 16:37:46 UTC
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-CT-1-utah.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-1
INFO:omni:Got return from CreateSliver for slice IG-CT-1 at http://utah.geniracks.net/protogeni/xmlrpc/am/2.0:
INFO:omni:<?xml version="1.0" ?>
INFO:omni:  <!-- Reserved resources for:
	Slice: IG-CT-1
	at AM:
	URN: unspecified_AM_URN
	URL: http://utah.geniracks.net/protogeni/xmlrpc/am/2.0
 -->
INFO:omni:  <rspec type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3   http://www.geni.net/resources/rspec/3/manifest.xsd">    

    <node client_id="VM-1" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc5" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14027">    
        <sliver_type name="emulab-openvz"/>    
        <interface client_id="VM-1:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" mac_address="021c38df33d5" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14033">      
            <ip address="192.168.1.1" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pcvm5-1" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="VM-1.IG-CT-1.pgeni-gpolab-bbn-com.utah.geniracks.net"/>    <services>      <login authentication="ssh-keys" hostname="pc5.utah.geniracks.net" port="31034" username="lnevers"/>    </services>  </node>  
    <node client_id="VM-2" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc5" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14028">    
        <sliver_type name="emulab-openvz"/>    
        <interface client_id="VM-2:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" mac_address="024671762dc9" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14034">      
            <ip address="192.168.1.2" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pcvm5-2" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="VM-2.IG-CT-1.pgeni-gpolab-bbn-com.utah.geniracks.net"/>    <services>      <login authentication="ssh-keys" hostname="pc5.utah.geniracks.net" port="31035" username="lnevers"/>    </services>  </node>  
    <node client_id="VM-3" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc5" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14029">    
        <sliver_type name="emulab-openvz"/>    
        <interface client_id="VM-3:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" mac_address="02b51e1a911b" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14035">      
            <ip address="192.168.1.3" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pcvm5-3" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="VM-3.IG-CT-1.pgeni-gpolab-bbn-com.utah.geniracks.net"/>    <services>      <login authentication="ssh-keys" hostname="pc5.utah.geniracks.net" port="31036" username="lnevers"/>    </services>  </node>  
    <node client_id="VM-4" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc5" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14030">    
        <sliver_type name="emulab-openvz"/>    
        <interface client_id="VM-4:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" mac_address="026430586edb" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14036">      
            <ip address="192.168.1.4" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pcvm5-4" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="VM-4.IG-CT-1.pgeni-gpolab-bbn-com.utah.geniracks.net"/>    <services>      <login authentication="ssh-keys" hostname="pc5.utah.geniracks.net" port="31037" username="lnevers"/>    </services>  </node>  
    <link client_id="lan0" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14032" vlantag="259">    
        <component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/>    
        <interface_ref client_id="VM-1:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14033"/>    
        <interface_ref client_id="VM-2:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14034"/>    
        <interface_ref client_id="VM-3:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14035"/>    
        <interface_ref client_id="VM-4:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14036"/>    
        <link_type name="lan"/>    
    </link>  
</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
  Options as run:
		aggregate: ['ig-utah']
		framework: pg

  Args: createsliver IG-CT-1 IG-CT-1-utah.rspec
  Result Summary: Got Reserved resources RSpec from utah-geniracks-net-protogeniv2 
INFO:omni: ============================================================

Several attempts were required to get the sliver, see instaticket:56. Once, the ticket was resolved, was able to create a sliver with 4 VMs, and then check if VMs were ready for login. At this point ran into instaticket:57, where login failed to one of the 4 requested nodes. This occurred twice, the ticket was resolved,

$ ./examples/readyToLogin.py -a ig-utah IG-CT-1 
   ....
================================================================================
LOGIN INFO for AM: http://utah.geniracks.net/protogeni/xmlrpc/am/2.0
================================================================================

VM-1's geni_status is: ready (am_status:ready) 
User lnevers logins to VM-1 using:
	xterm -e ssh -p 30778  -i /home/lnevers/.ssh/id_rsa lnevers@pc3.utah.geniracks.net &

VM-2's geni_status is: ready (am_status:ready) 
User lnevers logins to VM-2 using:
	xterm -e ssh -p 30779  -i /home/lnevers/.ssh/id_rsa lnevers@pc3.utah.geniracks.net &

VM-3's geni_status is: ready (am_status:ready) 
User lnevers logins to VM-3 using:
	xterm -e ssh -p 30780  -i /home/lnevers/.ssh/id_rsa lnevers@pc3.utah.geniracks.net &

VM-4's geni_status is: ready (am_status:ready) 
User lnevers logins to VM-4 using:
	xterm -e ssh -p 30781  -i /home/lnevers/.ssh/id_rsa lnevers@pc3.utah.geniracks.net &

Measurements

Login to two of the nodes and collect iperf and ping statistics. All measurements are collected over 60 seconds:

Iperf VM-2 to VM-4 (TCP) - TCP window size: 16.0 KB

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-67.7 sec  2.38 MBytes   294 Kbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[  7]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[  3]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[  6]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[  4]  0.0-67.1 sec  1.12 MBytes   141 Kbits/sec
[SUM]  0.0-67.1 sec  12.1 MBytes  1.52 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-62.5 sec  2.62 MBytes   352 Kbits/sec
[ 12]  0.0-62.5 sec  2.62 MBytes   352 Kbits/sec
[  3]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[  4]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[  7]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[  8]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[  9]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[  6]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[  5]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[ 11]  0.0-65.6 sec  2.75 MBytes   352 Kbits/sec
[SUM]  0.0-65.6 sec  27.2 MBytes  3.48 Mbits/sec

Iperf VM-2 to VM-4 (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  7.50 MBytes  1.05 Mbits/sec
[  3] Sent 5351 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec  7.50 MBytes  1.05 Mbits/sec   0.002 ms    0/ 5351 (0%)

Ping from VM-2 to VM-4

60 packets transmitted, 60 received, 0% packet loss, time 58999ms
rtt min/avg/max/mdev = 0.019/0.029/0.045/0.006 ms

IG-CT-2 - Access to New Site Raw PC and VM resources

Create a slice:

$ omni.py createslice IG-CT-2
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Created slice with Name IG-CT-2, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-2, Expiration 2012-11-06 14:26:36+00:00
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createslice:
  Options as run:
		framework: pg

  Args: createslice IG-CT-2
  Result Summary: Created slice with Name IG-CT-2, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-2, Expiration 2012-11-06 14:26:36+00:00
INFO:omni: ============================================================

Created a Sliver with one VM and one Raw PC using RSpec IG-CT-2-utah.rspec

$ omni.py createsliver -a ig-utah IG-CT-2 IG-CT-2-utah.rspec 
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-2 expires on 2012-11-06 14:26:36 UTC
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-CT-2-utah.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-2
INFO:omni:Got return from CreateSliver for slice IG-CT-2 at http://utah.geniracks.net/protogeni/xmlrpc/am/2.0:
INFO:omni:<?xml version="1.0" ?>
INFO:omni:  <!-- Reserved resources for:
	Slice: IG-CT-2
	at AM:
	URN: unspecified_AM_URN
	URL: http://utah.geniracks.net/protogeni/xmlrpc/am/2.0
 -->
INFO:omni:  <rspec type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3   http://www.geni.net/resources/rspec/3/manifest.xsd">    

   <node client_id="VM" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc3" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14065">    
        <sliver_type name="emulab-openvz"/>    
        <interface client_id="VM:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc3:eth1" mac_address="02e669a44e6a" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14069">      
            <ip address="192.168.1.1" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pcvm3-6" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="VM.IG-CT-2.pgeni-gpolab-bbn-com.utah.geniracks.net"/>    <services>      <login authentication="ssh-keys" hostname="pc3.utah.geniracks.net" port="31034" username="lnevers"/>    </services>  </node>  
    <node client_id="PC" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc4" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="true" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14066">    
        <sliver_type name="raw-pc"/>    
        <interface client_id="PC:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc4:eth1" mac_address="e83935b1ec9e" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14070">      
            <ip address="192.168.1.2" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pc4" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="PC.IG-CT-2.pgeni-gpolab-bbn-com.utah.geniracks.net"/>    <services>      <login authentication="ssh-keys" hostname="pc4.utah.geniracks.net" port="22" username="lnevers"/>    </services>  </node>  
    <link client_id="lan0" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14068" vlantag="260">    
        <component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/>    
        <interface_ref client_id="VM:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc3:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14069"/>    
        <interface_ref client_id="PC:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc4:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+14070"/>    
        <link_type name="lan"/>    
    </link>  
</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
  Options as run:
		aggregate: ['ig-utah']
		framework: pg

  Args: createsliver IG-CT-2 IG-CT-2-utah.rspec
  Result Summary: Got Reserved resources RSpec from utah-geniracks-net-protogeniv2 
INFO:omni: ============================================================

Verified that nodes are ready for login:

$ ./examples/readyToLogin.py -a ig-utah IG-CT-2  
================================================================================
LOGIN INFO for AM: http://utah.geniracks.net/protogeni/xmlrpc/am/2.0
================================================================================

PC's geni_status is: ready (am_status:ready) 
User lnevers logins to PC using:
	xterm -e ssh -i /home/lnevers/.ssh/id_rsa lnevers@pc4.utah.geniracks.net &

VM's geni_status is: ready (am_status:ready) 
User lnevers logins to VM using:
	xterm -e ssh -p 31034  -i /home/lnevers/.ssh/id_rsa lnevers@pc3.utah.geniracks.net &

Measurements

Log into each host and collect Iperf and ping statistics. All measurements are collected over 60 seconds:

Iperf PC to VM (TCP) - TCP window size: 16.0 KB

One Client

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  6.56 GBytes   939 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec  1.32 GBytes   189 Mbits/sec
[  4]  0.0-60.0 sec  1.33 GBytes   191 Mbits/sec
[  3]  0.0-60.0 sec  1.32 GBytes   188 Mbits/sec
[  7]  0.0-60.0 sec  1.23 GBytes   176 Mbits/sec
[  6]  0.0-60.0 sec  1.37 GBytes   196 Mbits/sec
[SUM]  0.0-60.0 sec  6.56 GBytes   940 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   722 MBytes   101 Mbits/sec
[  7]  0.0-60.0 sec   660 MBytes  92.2 Mbits/sec
[ 12]  0.0-60.0 sec   699 MBytes  97.7 Mbits/sec
[  5]  0.0-60.0 sec   616 MBytes  86.2 Mbits/sec
[  9]  0.0-60.0 sec   692 MBytes  96.7 Mbits/sec
[  6]  0.0-60.0 sec   618 MBytes  86.5 Mbits/sec
[  3]  0.0-60.0 sec   745 MBytes   104 Mbits/sec
[ 11]  0.0-60.0 sec   653 MBytes  91.3 Mbits/sec
[ 10]  0.0-60.0 sec   616 MBytes  86.0 Mbits/sec
[  8]  0.0-60.0 sec   705 MBytes  98.6 Mbits/sec
[SUM]  0.0-60.0 sec  6.57 GBytes   940 Mbits/sec

Iperf PC to VM (UDP) - 1470 byte datagrams

One Client (UDP buffer size: 136 KByte)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  7.50 MBytes  1.05 Mbits/sec
[  3] Sent 5351 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec  7.50 MBytes  1.05 Mbits/sec   0.003 ms    0/ 5351 (0%)

Ping from VM to PC

60 packets transmitted, 60 received, 0% packet loss, time 59000ms
rtt min/avg/max/mdev = 0.120/0.173/1.030/0.111 ms

Ping from PC to VM

60 packets transmitted, 60 received, 0% packet loss, time 58999ms
rtt min/avg/max/mdev = 0.118/0.147/0.351/0.049 ms

IG-CT-3 - Multiple sites experiment

Create a slice:

$ omni.py createslice IG-CT-3
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Created slice with Name IG-CT-3, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3, Expiration 2012-12-15 14:32:05+00:00
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createslice:

  Options as run:
		framework: pg
  Args: createslice IG-CT-3
  Result Summary: Created slice with Name IG-CT-3, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3, Expiration 2012-12-15 14:32:05+00:00
INFO:omni: ============================================================

Create a sliver with one VM at GPO and one VM at Utah using RSpec IG-CT-3.rspec. First created the InstaGENI GPO sliver:

$ omni.py createsliver IG-CT-3 -a ig-gpo IG-CT-3.rspec 
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3 expires on 2012-12-15 14:32:05 UTC
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-CT-3.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3
INFO:omni:Got return from CreateSliver for slice IG-CT-3 at http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0:
INFO:omni:<!-- Reserved resources for:
	Slice: IG-CT-3
	at AM:
	URN: unspecified_AM_URN
	URL: http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0
 -->
INFO:omni:<rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3                            http://www.geni.net/resources/rspec/3/manifest.xsd" type="manifest">

  <node client_id="VM-1" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" exclusive="false" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+pc2" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+33">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="VM-1:if0" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+36" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc2:eth0">
      <ip address="192.168.4.1" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  <rs:vnode xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1" name="pcvm2-3"/><host name="VM-1.IG-CT-3.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com"/><services><login authentication="ssh-keys" hostname="pc2.instageni.gpolab.bbn.com" port="30522" username="lnevers"/></services></node>
  <node client_id="VM-2" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="VM-2:if0">
      <ip address="192.168.4.2" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <link client_id="gre-tunnel0" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+35">
    <component_manager name="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm"/>
    <component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/>
    <interface_ref client_id="VM-1:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc2:eth0" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+36"/>
    <interface_ref client_id="VM-2:if0"/>
    <property source_id="VM-1:if0" dest_id="VM-2:if0"/>
    <property source_id="VM-2:if0" dest_id="VM-1:if0"/>
    <link_type name="gre-tunnel"/>
  </link>
</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:

  Options as run:
		aggregate: ['ig-gpo']
		framework: pg

  Args: createsliver IG-CT-3 IG-CT-3.rspec

  Result Summary: Got Reserved resources RSpec from instageni-gpolab-bbn-com-protogeniv2 
INFO:omni: ============================================================

Then creates the InstaGENI Utah sliver:

$ omni.py createsliver IG-CT-3 -a ig-utah IG-CT-3.rspec
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3 expires on 2012-12-15 14:32:05 UTC
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-CT-3.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3
INFO:omni:Got return from CreateSliver for slice IG-CT-3 at http://utah.geniracks.net/protogeni/xmlrpc/am/2.0:
INFO:omni:<!-- Reserved resources for:
	Slice: IG-CT-3
	at AM:
	URN: unspecified_AM_URN
	URL: http://utah.geniracks.net/protogeni/xmlrpc/am/2.0
 -->
INFO:omni:<rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3                            http://www.geni.net/resources/rspec/3/manifest.xsd" type="manifest">

  <node client_id="VM-1" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="VM-1:if0">
      <ip address="192.168.4.1" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <node client_id="VM-2" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc5" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+15734">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="VM-2:if0" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+15737" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth0">
      <ip address="192.168.4.2" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  <rs:vnode xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1" name="pcvm5-2"/><host name="VM-2.IG-CT-3.pgeni-gpolab-bbn-com.utah.geniracks.net"/><services><login authentication="ssh-keys" hostname="pc5.utah.geniracks.net" port="31034" username="lnevers"/></services></node>
  <link client_id="gre-tunnel0" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+15736">
    <component_manager name="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm"/>
    <component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/>
    <interface_ref client_id="VM-1:if0"/>
    <interface_ref client_id="VM-2:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth0" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+15737"/>
    <property source_id="VM-1:if0" dest_id="VM-2:if0"/>
    <property source_id="VM-2:if0" dest_id="VM-1:if0"/>
    <link_type name="gre-tunnel"/>
  </link>
</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
  Options as run:
		aggregate: ['ig-utah']
		framework: pg
  Args: createsliver IG-CT-3 IG-CT-3.rspec
  Result Summary: Got Reserved resources RSpec from utah-geniracks-net-protogeniv2 
INFO:omni: ============================================================

Determined login information at each GPO and Utah aggregate:

$ readyToLogin.py IG-CT-3 -a ig-gpo 
  ....

VM-1's geni_status is: ready (am_status:ready) 
User lnevers logins to VM-1 using:
	xterm -e ssh -p 30522  -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com &


$ readyToLogin.py IG-CT-3 -a ig-utah
  ....
VM-2's geni_status is: ready (am_status:ready) 
User lnevers logins to VM-2 using:
	xterm -e ssh -p 31034  -i /home/lnevers/.ssh/id_rsa lnevers@pc5.utah.geniracks.net &

Measuraments

Iperf InstaGENI Utah VM-2 to GPO VM-1 (TCP) - TCP window size: 16.0 KB

One Client_

Five Clients

Ten Clients

Iperf InstaGENI Utah VM-2 to GPO VM-1 (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 2.0 sec   258 KBytes  1.05 Mbits/sec
[  3] Sent 180 datagrams
[  3] Server Report:
[  3]  0.0- 1.5 sec   202 KBytes  1.07 Mbits/sec   0.472 ms   39/  180 (22%)

Ping from InstaGENI Utah VM-2 to the GPO VM-1

60 packets transmitted, 60 received, 0% packet loss, time 59088ms
rtt min/avg/max/mdev = 71.673/74.004/115.108/6.598 ms

IG-CT-4 - Multiple sites OpenFlow experiment and interoperability

This confirmation test creates a sliver at each of the following Aggregates:

Note: To avoid multiple resource requests to the PG Utah aggregate, and thus multiple slices, one can comine the RSPec for the PG Utah VMs on shared VLAN 1750 and the request for the Indiana WAPG nodes into one RSpec. An example of the combined RSpec is IG-CT-4-indiana-wapg-pg-utah.rspec.


Following is the command sequence that is executed to setup the topology for this confirmation test:

# Create the slice to be used for this confirmation test:
$ omni.py createslice IG-CT-4

# Create the FOAM slivers at the Internet and NLR FOAM
$ omni.py createsliver -a of-i2 IG-CT-4 IG-CT-4-openflow-internet2.rspec -V1
$ omni.py createsliver -a of-nlr IG-CT-4 IG-CT-4-openflow-nlr.rspec -V1

# Create FOAM Sliver at UEN regional for path to backbone
$ omni.py createsliver -a of-uen IG-CT-4  IG-CT-4-openflow-uen.rspec  -V1

# Create the FOAM sliver at Utah InstaGENI FOAM which will allow the PG Utah FOAM to interoperate with sliver.
$ omni.py createsliver -a of-ig IG-CT-4 IG-CT-4-openflow-instageni.rspec  -V1

# Create the slivers at InstaGENI Utah to request nodes on shared VLAN 1750
omni.py createsliver -a ig-utah IG-CT-4 IG-CT-4-ig-utah.rspec 

# Create the slivers at InstaGENI GPO to request nodes on shared VLAN 1750
omni.py createsliver -a ig-gpo IG-CT-4 IG-CT-4-ig-gpo.rspec 

# Create the sliver at PG Utah to request one WAPG Node at Indiana and one VM at PG Utah on shared VLAN 1750.
$ omni.py createsliver -a pg-utah IG-CT-4  IG-CT-4-indiana-wapg.rspec 

Note: To avoid multiple resource requests to the PG Utah aggregate, and thus multiple slices, one can combine the RSpec for the PG Utah VMs on shared VLAN 1750 and the request for the Indiana WAPG nodes into one RSpec. An example of the combined RSpec is IG-CT-4-indiana-wapg-pg-utah.rspec.

Once the slivers were ready, determined login for ExoGENI, InstaGENI, PG and Indiana hosts on shared VLAN 1750: Once the slivers were ready, determined login for PG and Indiana hosts on shared VLAN 1750:

$ readyToLogin.py -a pg-utah IG-CT-4
<...>
wapg-indiana-pg58's geni_status is: ready (am_status:ready) 
User lnevers logins to wapg-indiana-pg58 using:
	xterm -e ssh -i /home/lnevers/.ssh/id_rsa lnevers@pg58.emulab.net &

utah-pg's geni_status is: ready (am_status:ready) 
User lnevers logins to utah-pg using:
	xterm -e ssh -p 32314  -i /home/lnevers/.ssh/id_rsa lnevers@pc545.emulab.net &

Determined login for Utah InstaGENI:

$ readyToLogin.py -a ig-utah  IG-CT-4
<...>
utah-ig's geni_status is: ready (am_status:ready) 
User lnevers logins to utah-ig using:
	xterm -e ssh -p 31034  -i /home/lnevers/.ssh/id_rsa lnevers@pc3.utah.geniracks.net &

utah-ig2's geni_status is: ready (am_status:ready) 
User lnevers logins to utah-ig2 using:
	xterm -e ssh -p 31035  -i /home/lnevers/.ssh/id_rsa lnevers@pc3.utah.geniracks.net &

Determined login for GPO InstaGENI:

$ readyToLogin.py -a ig-gpo IG-CT-4
<...>
gpo-ig2's geni_status is: ready (am_status:ready) 
User lnevers logins to gpo-ig2 using:
	xterm -e ssh -p 30779  -i /home/lnevers/.ssh/id_rsa lnevers@pc1.instageni.gpolab.bbn.com &

gpo-ig's geni_status is: ready (am_status:ready) 
User lnevers logins to gpo-ig using:
	xterm -e ssh -p 30778  -i /home/lnevers/.ssh/id_rsa lnevers@pc1.instageni.gpolab.bbn.com &

Determined login for GPO ExoGENI:

$ readyToLogin.py -a eg-gpo IG-CT-4
<...>
User root logins to VM using:
	xterm -e ssh -i /home/lnevers/.ssh/id_rsa root@192.1.242.9 &

Measurements

This section captures measurements collected between the following endpoints:

  1. InstaGENI Utah VM and InstaGENI GPO VM
  2. InstaGENI Utah VM and the PG Utah VM
  3. InstaGENI Utah VM and the ExoGENI GPO VM
  4. PG Utah VM and the ExoGENI GPO VM
  5. InstaGENI Utah VM and the WAPG node at Indiana
  1. The measurements collected for InstaGENI GPO VM to the InstaGENI Utah VM:

Iperf InstaGENI GPO VM to the InstaGENI Utah VM (TCP) - TCP window size: 16.0 KB

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.4 sec  80.4 MBytes  11.2 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.7 sec  30.6 MBytes  4.30 Mbits/sec
[  5]  0.0-59.9 sec  28.6 MBytes  4.01 Mbits/sec
[  7]  0.0-60.0 sec  28.5 MBytes  3.98 Mbits/sec
[  6]  0.0-60.1 sec  29.1 MBytes  4.07 Mbits/sec
[  3]  0.0-61.3 sec  41.5 MBytes  5.68 Mbits/sec
[SUM]  0.0-61.3 sec   158 MBytes  21.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 11]  0.0-59.8 sec  22.6 MBytes  3.17 Mbits/sec
[  7]  0.0-60.0 sec  22.4 MBytes  3.13 Mbits/sec
[  4]  0.0-60.0 sec  41.1 MBytes  5.75 Mbits/sec
[  8]  0.0-60.0 sec  20.2 MBytes  2.83 Mbits/sec
[  3]  0.0-60.1 sec  29.4 MBytes  4.10 Mbits/sec
[  5]  0.0-60.1 sec  32.2 MBytes  4.50 Mbits/sec
[  9]  0.0-60.1 sec  34.8 MBytes  4.85 Mbits/sec
[ 12]  0.0-60.6 sec  43.1 MBytes  5.97 Mbits/sec
[  6]  0.0-60.7 sec  26.1 MBytes  3.61 Mbits/sec
[ 10]  0.0-60.9 sec  29.5 MBytes  4.06 Mbits/sec
[SUM]  0.0-60.9 sec   302 MBytes  41.5 Mbits/sec

Iperf InstaGENI GPO VM to the InstaGENI Utah VM (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  7.41 MBytes  1.04 Mbits/sec
[  3] Sent 5351 datagrams
read failed: Connection refused
[  3] WARNING: did not receive ack of last datagram after 4 tries.

Ping from InstaGENI GPO VM to the InstaGENI Utah VM

60 packets transmitted, 60 received, 0% packet loss, time 59087ms
rtt min/avg/max/mdev = 288.700/375.296/3010.292/417.964 ms, pipe 4
  1. The measurements collected for InstaGENI Utah VM to the PG Utah:

Iperf InstaGENI Utah VM to the PG Utah VM (TCP) - TCP window size: 16.0 KB

One Client_

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  6.32 GBytes   904 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-59.9 sec  1.20 GBytes   172 Mbits/sec
[  4]  0.0-59.9 sec  1.46 GBytes   210 Mbits/sec
[  6]  0.0-59.9 sec  1.35 GBytes   194 Mbits/sec
[  7]  0.0-59.9 sec  1.16 GBytes   166 Mbits/sec
[  5]  0.0-60.0 sec  1.15 GBytes   164 Mbits/sec
[SUM]  0.0-60.0 sec  6.32 GBytes   905 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-59.9 sec   580 MBytes  81.2 Mbits/sec
[  5]  0.0-59.9 sec   638 MBytes  89.4 Mbits/sec
[  4]  0.0-59.9 sec   644 MBytes  90.2 Mbits/sec
[  9]  0.0-60.0 sec   600 MBytes  84.0 Mbits/sec
[ 12]  0.0-60.0 sec   659 MBytes  92.2 Mbits/sec
[  8]  0.0-59.9 sec   763 MBytes   107 Mbits/sec
[  7]  0.0-60.0 sec   669 MBytes  93.6 Mbits/sec
[  6]  0.0-60.0 sec   607 MBytes  84.9 Mbits/sec
[ 10]  0.0-60.0 sec   669 MBytes  93.5 Mbits/sec
[ 11]  0.0-60.0 sec   646 MBytes  90.3 Mbits/sec
[SUM]  0.0-60.0 sec  6.32 GBytes   905 Mbits/sec

Iperf InstaGENI Utah VM to the PG Utah VM (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  7.50 MBytes  1.05 Mbits/sec
[  3] Sent 5351 datagrams
[  3] Server Report:
[  3]  0.0-59.9 sec  7.50 MBytes  1.05 Mbits/sec   0.016 ms    5/ 5351 (0.093%)
[  3]  0.0-59.9 sec  5 datagrams received out-of-order

Ping from InstaGENI Utah VM to the PG Utah VM

60 packets transmitted, 60 received, 0% packet loss, time 60999ms
rtt min/avg/max/mdev = 0.158/1.287/66.300/8.324 ms
  1. The measurements collected for InstaGENI Utah VM and the ExoGENI GPO VM:

Iperf InstaGENI Utah VM to the ExoGENI GPO VM (TCP) - TCP window size: 16.0 KB

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.3 sec  25.5 MBytes  3.55 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  23.9 MBytes  3.34 Mbits/sec
[  4]  0.0-60.2 sec  25.2 MBytes  3.52 Mbits/sec
[  5]  0.0-60.2 sec  25.5 MBytes  3.55 Mbits/sec
[  7]  0.0-60.3 sec  25.5 MBytes  3.55 Mbits/sec
[  6]  0.0-60.6 sec  25.1 MBytes  3.48 Mbits/sec
[SUM]  0.0-60.6 sec   125 MBytes  17.3 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  9]  0.0-60.0 sec  23.0 MBytes  3.22 Mbits/sec
[  4]  0.0-60.1 sec  24.9 MBytes  3.47 Mbits/sec
[ 11]  0.0-60.3 sec  23.2 MBytes  3.24 Mbits/sec
[  3]  0.0-60.3 sec  24.2 MBytes  3.38 Mbits/sec
[  8]  0.0-60.3 sec  23.1 MBytes  3.22 Mbits/sec
[  7]  0.0-60.4 sec  23.1 MBytes  3.21 Mbits/sec
[  6]  0.0-60.4 sec  23.2 MBytes  3.23 Mbits/sec
[ 12]  0.0-60.5 sec  25.2 MBytes  3.50 Mbits/sec
[  5]  0.0-60.6 sec  24.2 MBytes  3.36 Mbits/sec
[ 10]  0.0-60.8 sec  23.4 MBytes  3.23 Mbits/sec
[SUM]  0.0-60.8 sec   238 MBytes  32.8 Mbits/sec

Iperf InstaGENI Utah VM to the ExoGENI GPO VM (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  7.50 MBytes  1.05 Mbits/sec
[  3] Sent 5351 datagrams
[  3] Server Report:
[  3]  0.0-58.6 sec  7.49 MBytes  1.07 Mbits/sec   0.166 ms    7/ 5351 (0.13%)
[  3]  0.0-58.6 sec  114 datagrams received out-of-order

Ping from InstaGENI Utah VM to the ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59057ms
rtt min/avg/max/mdev = 288.919/383.758/3041.091/430.253 ms, pipe 4
  1. The measurements collected for PG Utah VM to the ExoGENI GPO VM

Iperf PG Utah VM to the ExoGENI GPO VM (TCP) - TCP window size: 16.0 KB

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.3 sec  25.6 MBytes  3.56 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  25.5 MBytes  3.57 Mbits/sec
[  7]  0.0-60.1 sec  25.5 MBytes  3.56 Mbits/sec
[  3]  0.0-60.1 sec  25.5 MBytes  3.56 Mbits/sec
[  5]  0.0-60.3 sec  24.2 MBytes  3.37 Mbits/sec
[  6]  0.0-60.8 sec  25.8 MBytes  3.55 Mbits/sec
[SUM]  0.0-60.8 sec   126 MBytes  17.4 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-59.6 sec  24.1 MBytes  3.40 Mbits/sec
[  8]  0.0-59.9 sec  23.9 MBytes  3.34 Mbits/sec
[  5]  0.0-59.9 sec  25.2 MBytes  3.53 Mbits/sec
[  3]  0.0-60.0 sec  25.2 MBytes  3.53 Mbits/sec
[ 12]  0.0-60.0 sec  23.2 MBytes  3.25 Mbits/sec
[  6]  0.0-60.1 sec  25.1 MBytes  3.51 Mbits/sec
[ 10]  0.0-60.1 sec  23.4 MBytes  3.26 Mbits/sec
[ 11]  0.0-60.1 sec  23.4 MBytes  3.26 Mbits/sec
[  4]  0.0-60.1 sec  25.2 MBytes  3.52 Mbits/sec
[  9]  0.0-60.4 sec  23.1 MBytes  3.21 Mbits/sec
[SUM]  0.0-60.4 sec   242 MBytes  33.6 Mbits/sec

Iperf PG Utah VM to the ExoGENI GPO VM (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  7.50 MBytes  1.05 Mbits/sec
[  3] Sent 5351 datagrams
[  3] Server Report:
[  3]  0.0-58.6 sec  7.50 MBytes  1.07 Mbits/sec   0.028 ms  125/ 5351 (2.3%)
[  3]  0.0-58.6 sec  125 datagrams received out-of-order

Ping from PG Utah VM to the ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59059ms
rtt min/avg/max/mdev = 288.861/367.581/2837.850/387.586 ms, pipe 3

  1. The measurements collected for InstaGENI Utah VM to the WAPG Indiana:

Iperf InstaGENI Utah VM to the WAPG Indiana (TCP) - TCP window size: 16.0 KB

One Client_

Five Clients

Ten Clients

Iperf InstaGENI Utah VM to the WAPG Indiana (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte

Ping from InstaGENI Utah VM to the WAPG Indiana

75 packets transmitted, 16 received, 78% packet loss, time 74008ms
rtt min/avg/max/mdev = 391.590/1236.949/3158.446/996.015 ms, pipe 4

IG-CT-5 - Experiment Monitoring

Reviewed content of the GMOC Monitoring page for aggregates. Found Utah InstaGENI rack. "Last Updated" information was very old dates this is due to old stale data that is slated to be removed.

Verified that the Utah compute resources aggregates show up in the list of aggregates and provides Aggregate Name, Type, Last Update, Version, POP, and Organization. The List of InstaGENI Utah Aggregates (FOAM and PG):

Compute aggregate:

Active slivers:

List of Resources in use:

Monitoring should show Aggregate measurement for CPU utilization, Disk Utilization, Network Statistics. At the time of this test these measurements were not available.

The Utah InstaGENI FOAM resources aggregate details:

Active OF slivers:

List of OpenFlow Resources in use:

Monitoring should show Aggregate measurement for CPU utilization, Disk Utilization, Network Statistics and OF Datapath and Sliver Statistics. At the time of this test these measurements were not available.

IG-CT-6 - Administrative Tests

Followed instructions at Admin Accounts on InstaGeni Racks page for account request. A local admin account was create and also had to join the emulab-ops group at https://boss.utah.geniracks.net/joinproject.php3?target_pid=emulab-ops. Once account was create and membership to emulab-ops was approved proceeded to execute administrative tests. Later also found that access to FOAM and FlowVisor VM required yet-another account to be created.

As a GPO Admin user, verified administrative tasks. First, access each rack node (control node and experiment nodes) via control network interface with SSH and execute a sudo command.

$ ssh utah.control.geniracks.net
Welcome to Ubuntu precise (development branch) (GNU/Linux 3.2.0-23-generic x86_64)

 * Documentation:  https://help.ubuntu.com/

  System information as of Thu Nov  8 06:48:01 MST 2012

  System load:     0.0               IP address for xenbr0: 155.98.34.2
  Usage of /:      47.5% of 5.85GB   IP address for xenbr1: 10.1.1.254
  Memory usage:    12%               IP address for xenbr2: 10.2.1.254
  Swap usage:      0%                IP address for virbr0: 192.168.122.1
  Processes:       149               IP address for xenbr3: 10.3.1.254
  Users logged in: 1                 IP address for xenbr4: 10.4.1.254

  Graph this data and manage this system at https://landscape.canonical.com/
Last login: Thu Nov  8 06:47:07 2012 from dhcp89-069-100.bbn.com
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

lnevers@control:~$ sudo whoami
root

Also access the node via the PG Boss alias:

$ ssh lnevers@boss.utah.geniracks.net
Last login: Thu Nov  8 06:30:03 2012 from dhcp89-069-100.bbn.com
FreeBSD 9.0-STABLE (XEN) #2: Wed May 30 08:18:48 MDT 2012

Welcome to FreeBSD!

To quickly create an empty file, use "touch filename".
		-- Dru <genesis@istar.ca>
> sudo whoami
root
> 

Further verified access by ssh from ops.utah.geniracks.net to boss.utah.geniracks.net, which is usually restricted for non-admin users:

$ ssh lnevers@ops.utah.geniracks.net
Last login: Wed Nov  7 07:47:35 2012 from dhcp89-069-100.bbn.com
FreeBSD 9.0-STABLE (XEN) #2: Wed May 30 08:18:48 MDT 2012

> ssh boss
Last login: Thu Nov  8 06:31:52 2012 from dhcp89-069-100.bbn.com
FreeBSD 9.0-STABLE (XEN) #2: Wed May 30 08:18:48 MDT 2012

> uptime
 6:35AM  up 64 days, 16:27, 16 users, load averages: 0.07, 0.03, 0.00
> 

From boss node accessed each of the experiment nodes that support VMs:

$ for i in pc1 pc3 pc5; do ssh $i "echo -n '===> Host: ';hostname;sudo whoami;uname -a;echo"; done
===> Host: vhost3.shared-nodes.emulab-ops.utah.geniracks.net
root
Linux vhost3.shared-nodes.emulab-ops.utah.geniracks.net 2.6.32-042stab049.6.emulab.1 #1 SMP Mon May 21 14:36:04 MDT 2012 x86_64 x86_64 x86_64 GNU/Linux

===> Host: vhost2.shared-nodes.emulab-ops.utah.geniracks.net
root
Linux vhost2.shared-nodes.emulab-ops.utah.geniracks.net 2.6.32-042stab049.6.emulab.1 #1 SMP Mon May 21 14:36:04 MDT 2012 x86_64 x86_64 x86_64 GNU/Linux

===> Host: vhost1.shared-nodes.emulab-ops.utah.geniracks.net
root
Linux vhost1.shared-nodes.emulab-ops.utah.geniracks.net 2.6.32-042stab049.6.emulab.1 #1 SMP Mon May 21 14:36:04 MDT 2012 x86_64 x86_64 x86_64 GNU/Linux

Access Dedicated Nodes:

Access infrastructure Switches using documented password. First connect to the switch named procurve1 the control network switch:

[lnevers@boss /usr/testbed]$ more /usr/testbed/etc/switch.pswd
 ...
[lnevers@boss /usr/testbed]$ telnet procurve1
 Password:
ProCurve J9085A Switch 2610-24
Software revision R.11.70



ProCurve Switch 2610-24# show running-config 

Running configuration:

; J9085A Configuration Editor; Created on release #R.11.70

hostname "ProCurve Switch 2610-24" 
interface 28 
   disable
exit
ip default-gateway 10.1.1.254 
snmp-server community "xxxxx" Unrestricted 
vlan 1 
   name "DEFAULT_VLAN" 
   untagged 1-20,23-28 
   ip address 10.254.254.253 255.255.255.0 
   no untagged 21-22 
   ip igmp 
   exit 
vlan 10 
   name "control-hardware" 
   untagged 21 
   ip address 10.1.1.253 255.255.255.0 
   exit 
vlan 11 
   name "control-alternate" 
   untagged 22 
   ip address 10.3.1.253 255.255.255.0 
   ip igmp 
   exit 
management-vlan 10 
password xxxxxxxx
password xxxxxxxx

ProCurve Switch 2610-24# 

Connect to the switch named procurve2 the dataplane network switch via ssh using the documented password:

[lnevers@boss /usr/testbed]$more /usr/testbed/etc/switch.pswd
 ...
[lnevers@boss /usr/testbed]$ ssh manager@procurve2
 Password:
HP J8697A Switch E5406zl
Software revision K.15.06.5008
....

HP-5406zl#  show running-config
Running configuration:

; J8697A Configuration Editor; Created on release #K.15.06.5008
; Ver #02:10.0d:1f

hostname "HP-5406zl" 
module 1 type J9549A 
interface A1 
   disable
   speed-duplex auto-1000 
exit
interface A2 
   disable
   speed-duplex auto-1000 
exit
interface A3 
   speed-duplex auto-1000 
exit
interface A4 
   disable
   speed-duplex auto-1000 
exit
interface A6 
   disable
   speed-duplex auto-1000 
exit
interface A7 
   speed-duplex auto-1000 
exit
interface A8 
   speed-duplex auto-1000 
exit
interface A9 
   disable
   speed-duplex auto-1000 
exit
interface A10 
   speed-duplex auto-1000 
exit
interface A11 
   speed-duplex auto-1000 
exit
interface A12 
   disable
   speed-duplex auto-1000 
exit
interface A13 
   disable
   speed-duplex auto-1000 
exit
interface A15 
   disable
   speed-duplex auto-1000 
exit
interface A19 
   speed-duplex auto-1000 
exit
ip default-gateway 10.2.1.254 
vlan 1 
   name "DEFAULT_VLAN" 
   forbid A3,A8,A10-A11 
   untagged A1-A2,A4-A6,A9,A12-A18,A21-A24 
   no untagged A3,A7-A8,A10-A11,A19-A20 
   no ip address 
   exit 
vlan 10 
   name "control-hardware" 
   untagged A20 
   ip address 10.2.1.253 255.255.255.0 
   exit 
vlan 257 
   name "_650" 
   untagged A3,A8,A10-A11 
   no ip address 
   exit 
vlan 792 
   name "_839" 
   tagged A19 
   no ip address 
   exit 
vlan 1517 
   name "_1282" 
   no ip address 
   exit 
vlan 1592 
   name "_1284" 
   no ip address 
   exit 
vlan 1595 
   name "_1285" 
   no ip address 
   exit 
vlan 1591 
   name "_1283" 
   no ip address 
   exit 
vlan 258 
   name "_1689" 
   no ip address 
   exit 
vlan 1750 
   name "_849" 
   tagged A7,A10,A19 
   no ip address 
   exit 
vlan 262 
   name "_3214" 
   tagged A7,A10 
   no ip address 
   exit 
power-over-ethernet pre-std-detect
no web-management
ip ssh filetransfer
openflow
   vlan 1750
      enable
      controller "tcp:10.2.1.7:6633" fail-secure on
      exit
   exit
snmp-server community "xxxxxxxxxxx" unrestricted
management-vlan 10
no tftp client
no tftp server
password xxxxx
password xxxx

After finding the "Management IP for a the node PC5 at https://boss.utah.geniracks.net/shownode.php3?node_id=pc5], accessed remote PDU via control network interface with SSH.

[lnevers@boss ~]$ more /usr/testbed/etc/ilo.pswd
 ...
[lnevers@boss ~]$ ssh elabman@155.98.34.101
Warning: Permanently added '155.98.34.101' (DSA) to the list of known hosts.
User:elabman logged-in to ILOUSE211XXJN.utah.geniracks.net(155.98.34.101)
iLO 3 Advanced 1.28 at  Jan 13 2012
Server Name: USE211XXJN
Server Power: On

</>hpiLO-> 

Or access via Web Interface at the same address as ssh above:

Once logged in, able to access all features:

Access the FOAM VM and gather information for version

$ ssh foam.utah.geniracks.net
Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-24-generic x86_64)
 * Documentation:  https://help.ubuntu.com/
Last login: Thu Nov  8 10:27:41 2012 from dhcp89-069-100.bbn.com

lnevers@foam:~$ foamctl admin:get-version  --passwd-file=/opt/foam/etc/foampasswd
{
 "version": "8ea56b139ec9-0.8.2-FIX"
}

Check FOAM configuration for site.admin.email, geni.site-tag, email.from settings:

lnevers@foam:~$ foamctl config:get-value --key="site.admin.email"  --passwd-file=/opt/foam/etc/foampasswd
{
 "value": "nick.bastin@gmail.com"
}

lnevers@foam:~$ foamctl config:get-value --key="geni.site-tag"  --passwd-file=/opt/foam/etc/foampasswd
{
 "value": "ig-utah"
}

lnevers@foam:~$ foamctl config:get-value --key="email.from"  --passwd-file=/opt/foam/etc/foampasswd
{
 "value": "nick.bastin+ig-utah@gmail.com"
}
# check if FOAM auto-approve is on. Value 2 = auto-approve is on.

lnevers@foam:~$ foamctl config:get-value --key="geni.approval.approve-on-creation"  --passwd-file=/opt/foam/etc/foampasswd

{
 "value": 2
}

Show FOAM slivers and details for one sliver:

lnevers@foam:~$ foamctl geni:list-slivers --passwd-file=/opt/foam/etc/foampasswd 
{
 "slivers": [
  {
   "status": "Approved", 
   "sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+jbs16:a0facb7c-efa3-42c1-b47a-cb6d2b8540c2", 
   "creation": "2012-07-02 18:01:20.499123+00:00", 
   "pend_reason": null, 
   "expiration": "2013-02-15 23:00:00+00:00", 
   "deleted": "False", 
   "user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+jbs", 
   "slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+jbs16", 
   "enabled": true, 
   "email": "jbs@pgeni.gpolab.bbn.com", 
   "flowvisor_slice": "a0facb7c-efa3-42c1-b47a-cb6d2b8540c2", 
   "desc": "JBS 16 OpenFlow resources at Utah InstaGENI.", 
   "ref": null, 
   "id": 1, 
   "uuid": "a0facb7c-efa3-42c1-b47a-cb6d2b8540c2"
  }, 
  {
   "status": "Approved", 
   "sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tuptymon:b75b02da-a161-49df-a02e-38ecaa3e609f", 
   "creation": "2012-07-03 15:47:39.120226+00:00", 
   "pend_reason": null, 
   "expiration": "2013-01-30 00:00:00+00:00", 
   "deleted": "False", 
   "user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+tupty", 
   "slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tuptymon", 
   "enabled": true, 
   "email": "tupty@pgeni.gpolab.bbn.com", 
   "flowvisor_slice": "b75b02da-a161-49df-a02e-38ecaa3e609f", 
   "desc": "tuptymon OpenFlow resources at Utah InstaGENI.", 
   "ref": null, 
   "id": 4, 
   "uuid": "b75b02da-a161-49df-a02e-38ecaa3e609f"
  }, 
  {
   "status": "Approved", 
   "sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+jbs15:47d538d0-8339-40fc-9fd1-8b02e84b849c", 
   "creation": "2012-07-03 16:57:51.151144+00:00", 
   "pend_reason": null, 
   "expiration": "2013-02-15 23:00:00+00:00", 
   "deleted": "False", 
   "user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+jbs", 
   "slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+jbs15", 
   "enabled": true, 
   "email": "jbs@pgeni.gpolab.bbn.com", 
   "flowvisor_slice": "47d538d0-8339-40fc-9fd1-8b02e84b849c", 
   "desc": "JBS 15 OpenFlow resources at Utah InstaGENI.", 
   "ref": null, 
   "id": 5, 
   "uuid": "47d538d0-8339-40fc-9fd1-8b02e84b849c"
  }, 
  {
   "status": "Approved", 
   "sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tupty1755:908d6c1a-ddd0-47ee-a661-29041e6d7af8",
   "creation": "2012-09-28 15:31:06.884528+00:00", 
   "pend_reason": null, 
   "expiration": "2012-12-15 00:00:00+00:00", 
   "deleted": "False", 
   "user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+tupty", 
   "slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tupty1755", 
   "enabled": true, 
   "email": "tupty@pgeni.gpolab.bbn.com", 
   "flowvisor_slice": "908d6c1a-ddd0-47ee-a661-29041e6d7af8", 
   "desc": "tupty1755 OpenFlow resources at Utah InstaGENI.", 
   "ref": null, 
   "id": 18, 
   "uuid": "908d6c1a-ddd0-47ee-a661-29041e6d7af8"
  }
 ]
}


$ foamctl geni:show-sliver --urn "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tupty1755:908d6c1a-ddd0-47ee-a661-29041e6d7af8" --passwd-file=/opt/foam/etc/foampasswd

{
 "sliver": {
  "flowspace rules": 2, 
  "status": "Approved", 
  "creation": "2012-09-28 15:31:06.884528+00:00", 
  "uuid": "908d6c1a-ddd0-47ee-a661-29041e6d7af8", 
  "deleted": "False", 
  "user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+tupty", 
  "slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tupty1755", 
  "enabled": true, 
  "pend_reason": null, 
  "email": "tupty@pgeni.gpolab.bbn.com", 
  "controllers": [
   {
    "url": "tcp:hafmet.gpolab.bbn.com:33012", 
    "type": "primary"
   }
  ], 
  "expiration": "2012-12-15 00:00:00+00:00", 
  "desc": "tupty1755 OpenFlow resources at Utah InstaGENI.", 
  "sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tupty1755:908d6c1a-ddd0-47ee-a661-29041e6d7af8", 
  "ref": null, 
  "id": 18, 
  "flowvisor_slice": "908d6c1a-ddd0-47ee-a661-29041e6d7af8"
 }
}

Access the FlowVisor VM and gather version information:

$ ssh flowvisor.utah.geniracks.net
Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-24-generic x86_64)

 * Documentation:  https://help.ubuntu.com/
Last login: Thu Nov  8 10:25:11 2012 from dhcp89-069-100.bbn.com
lnevers@flowvisor:~$ 

Check the FlowVisor version, list of devices, get details for a device, list of active slices, and details for one of the slices:

#Version
lnevers@flowvisor:~$ fvctl --passwd-file=/home/jbs/fvpasswd ping hello
Got reply:
PONG(fvadmin): FV version=flowvisor-0.8.3::hello


# Device
lnevers@flowvisor:~$ fvctl --passwd-file=/home/jbs/fvpasswd listDevices
Device 0: 06:d6:00:24:a8:5d:0b:00

# Device detail
lnevers@flowvisor:~$ fvctl --passwd-file=/home/jbs/fvpasswd getDeviceInfo 06:d6:00:24:a8:5d:0b:00
nPorts=4
portList=7,10,19,65534
dpid=06:d6:00:24:a8:5d:0b:00
remote=/10.2.1.7:6633-->/10.2.1.253:62099
portNames=A7(7),A10(10),A19(19),local(65534)
lnevers@flowvisor:~$ 

# Slices
lnevers@flowvisor:~$ fvctl --passwd-file=/home/jbs/fvpasswd listSlices
Slice 0: fvadmin
Slice 1: a0facb7c-efa3-42c1-b47a-cb6d2b8540c2
Slice 2: b75b02da-a161-49df-a02e-38ecaa3e609f
Slice 3: 47d538d0-8339-40fc-9fd1-8b02e84b849c
Slice 4: 908d6c1a-ddd0-47ee-a661-29041e6d7af8

# Slice detail

lnevers@flowvisor:~$ fvctl --passwd-file=/home/jbs/fvpasswd getSliceInfo b75b02da-a161-49df-a02e-38ecaa3e609f
Got reply:
drop_policy=exact
connection_1=06:d6:00:24:a8:5d:0b:00-->/155.98.34.7:59708-->naxos.gpolab.bbn.com/192.1.249.133:31750
contact_email=tupty@pgeni.gpolab.bbn.com
controller_hostname=naxos.gpolab.bbn.com
controller_port=31750
creator=fvadmin

Note: FlowVisor Password location should be /etc/flowvisor/fvpasswd, not home directory

Check the FlowVisor setting:

$ fvctl --passwd-file=/home/jbs/fvpasswd dumpConfig /tmp/flowvisor-config
lnevers@flowvisor:~$ more /tmp/flowvisor-config 
{
   "flowvisor": [
      {
         "api_webserver_port": 8080,
         "api_jetty_webserver_port": 8081,
         "checkpointing": false,
         "listen_port": 6633,
         "track_flows": false,
         "stats_desc_hack": false,
         "run_topology_server": false,
         "logging": "NOTE",
         "log_ident": "flowvisor",
         "log_facility": "LOG_LOCAL7",
         "version": "flowvisor-0.9",
         "host": "localhost",
         "default_flood_perm": "fvadmin",
         "config_name": "default"
      }
   ],
   "Slice": [
      {
         "config_name": "default",
         "flowmap_type": "federated",
         "name": "fvadmin",
         "creator": "fvadmin",
         "passwd_crypt": "xxxxxxxxxxx",
         "passwd_salt": "xxxxxxxxxxx",
         "controller_hostname": "none",
         "controller_port": 0,
         "contact_email": "fvadmin@localhost",
         "drop_policy": "exact",
         "lldp_spam": true
      },
      {
         "config_name": "default",
         "flowmap_type": "federated",
         "name": "a0facb7c-efa3-42c1-b47a-cb6d2b8540c2",
         "creator": "fvadmin",
         "passwd_crypt": "xxxxxxxxxxx",
         "passwd_salt": "xxxxxxxxxxx",
         "controller_hostname": "naxos.gpolab.bbn.com",
         "controller_port": 33016,
         "contact_email": "jbs@pgeni.gpolab.bbn.com",
         "drop_policy": "exact",
         "lldp_spam": true
      },
      {
         "config_name": "default",
         "flowmap_type": "federated",
         "name": "b75b02da-a161-49df-a02e-38ecaa3e609f",
         "creator": "fvadmin",
         "passwd_crypt": "xxxxxxxxxxx",
         "passwd_salt": "xxxxxxxxxxx",
         "controller_hostname": "naxos.gpolab.bbn.com",
         "controller_port": 31750,
         "contact_email": "tupty@pgeni.gpolab.bbn.com",
         "drop_policy": "exact",
         "lldp_spam": true
      },
      {
         "config_name": "default",
         "flowmap_type": "federated",
         "name": "47d538d0-8339-40fc-9fd1-8b02e84b849c",
         "creator": "fvadmin",
         "passwd_crypt": "xxxxxxxxxxx",
         "passwd_salt": "xxxxxxxxxxx",
         "controller_hostname": "naxos.gpolab.bbn.com",
         "controller_port": 33015,
         "contact_email": "jbs@pgeni.gpolab.bbn.com",
         "drop_policy": "exact",
         "lldp_spam": true
      },
      {
         "config_name": "default",
         "flowmap_type": "federated",
         "name": "908d6c1a-ddd0-47ee-a661-29041e6d7af8",
         "creator": "fvadmin",
         "passwd_crypt": "xxxxxxxx",
         "passwd_salt": "xxxxxxxxxxx",
         "controller_hostname": "hafmet.gpolab.bbn.com",
         "controller_port": 33012,
         "contact_email": "tupty@pgeni.gpolab.bbn.com",
         "drop_policy": "exact",
         "lldp_spam": true
      }
   ],
   "FlowSpaceRule": [
      {
         "dpid": "6d60024a85d0b00",
         "priority": 2000,
         "in_port": 0,
         "dl_type": 2048,
         "nw_src": 170528768,
         "nw_dst": 170528768,
         "wildcards": 3279087,
         "slice_action": [
            {
               "a0facb7c-efa3-42c1-b47a-cb6d2b8540c2": 4
            }
         ]
      },
      {
         "dpid": "6d60024a85d0b00",
         "priority": 2000,
         "in_port": 0,
         "dl_type": 2054,
         "nw_src": 170528768,
         "nw_dst": 170528768,
         "wildcards": 3279087,
         "slice_action": [
            {
               "a0facb7c-efa3-42c1-b47a-cb6d2b8540c2": 4
            }
         ]
      },
      {
         "dpid": "6d60024a85d0b00",
         "priority": 2000,
         "in_port": 0,
         "dl_type": 2048,
         "nw_src": 171048960,
         "nw_dst": 171048960,
         "wildcards": 3412207,
         "slice_action": [
            {
               "b75b02da-a161-49df-a02e-38ecaa3e609f": 4
            }
         ]
      },
      {
         "dpid": "6d60024a85d0b00",
         "priority": 2000,
         "in_port": 0,
         "dl_type": 2054,
         "nw_src": 171048960,
         "nw_dst": 171048960,
         "wildcards": 3412207,
         "slice_action": [
            {
               "b75b02da-a161-49df-a02e-38ecaa3e609f": 4
            }
         ]
      },
      {
         "dpid": "6d60024a85d0b00",
         "priority": 2000,
         "in_port": 0,
         "dl_type": 2048,
         "nw_src": 170528512,
         "nw_dst": 170528512,
         "wildcards": 3279087,
         "slice_action": [
            {
               "47d538d0-8339-40fc-9fd1-8b02e84b849c": 4
            }
         ]
      },
      {
         "dpid": "6d60024a85d0b00",
         "priority": 2000,
         "in_port": 0,
         "dl_type": 2054,
         "nw_src": 170528512,
         "nw_dst": 170528512,
         "wildcards": 3279087,
         "slice_action": [
            {
               "47d538d0-8339-40fc-9fd1-8b02e84b849c": 4
            }
         ]
      },
      {
         "dpid": "6d60024a85d0b00",
         "priority": 2000,
         "in_port": 0,
         "dl_type": 2048,
         "nw_src": 168900352,
         "nw_dst": 168900352,
         "wildcards": 3279087,
         "slice_action": [
            {
               "908d6c1a-ddd0-47ee-a661-29041e6d7af8": 4
            }
         ]
      },
      {
         "dpid": "6d60024a85d0b00",
         "priority": 2000,
         "in_port": 0,
         "dl_type": 2054,
         "nw_src": 168900352,
         "nw_dst": 168900352,
         "wildcards": 3279087,
         "slice_action": [
            {
               "908d6c1a-ddd0-47ee-a661-29041e6d7af8": 4
            }
         ]
      }
   ]
}

Verify alerts for the compute resource Aggregate Manager are being reported to the GPO Tango GENI Nagios monitoring and that all alerts have status OK.

Verify alerts for the FOAM Aggregate Manager are being reported to the GPO Tango GENI Nagios monitoring and that all alerts have status OK.


Email help@geni.net for GENI support or email me with feedback on this page!

Attachments (14)