wiki:GENIRacksHome/InstageniRacks/ConfirmationTestStatus/UWashington

Version 12 (modified by lnevers@bbn.com, 4 years ago) (diff)

--

University of Washington InstaGENI Confirmation Tests

For details about the tests in this page, see the InstaGENI Confirmation Tests page.
For site status see the InstaGENI New Site Confirmation Tests Status page.

Note: Omni nick_names for site aggregates used for these tests are:

washington-ig=urn:publicid:IDN+instageni.washington.edu+authority+cm,https://instageni.washington.edu:12369/protogeni/xmlrpc/am
washington-ig-of=urn:publicid:IDN+openflow:foam:foam.instageni.washington.edu+authority+am,https://foam.instageni.washington.edu:3626/foam/gapi/2 

IG-CT-1 - Access to New Site VM resources

Got Aggregate version, which showed AM API V1, V2, and V3 are supported and V2 is default:

$ omni getversion -a washington-ig
09:24:59 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
09:24:59 INFO    : Loading config file '/home/lnevers/.gcf/omni_config'
09:24:59 INFO    : Using control framework portal
09:24:59 INFO    : Member Authority is https://ch.geni.net/MA (from config)
09:24:59 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
09:24:59 INFO    : Substituting AM nickname washington-ig with URL https://instageni.washington.edu:12369
09:25:03 INFO    :  (PG log url - look here for details on any failures: https://www.instageni.washington
09:25:03 INFO    : AM uwash-ig URN: urn:publicid:IDN+instageni.washington.edu+authority+cm (url: https://
09:25:03 INFO    : {   'code_tag': '59644b10cb058e22896f51ad801b8e23f0c18a97',
    'geni_ad_rspec_versions': [   {   'extensions': [],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/0.1',
                                      'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '0.1'},
                                  {   'extensions': [],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/0.2',
                                      'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '0.2'},
                                  {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emu
                                                        'http://www.protogeni.net/resources/rspec/ext/sit
                                      'namespace': 'http://www.protogeni.net/resources/rspec/2',
                                      'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '2'},
                                  {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emu
                                                        'http://www.protogeni.net/resources/rspec/ext/sit
                                      'namespace': 'http://www.geni.net/resources/rspec/3',
                                      'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd',
                                      'type': 'GENI',
                                      'version': '3'}],
    'geni_api': 2,
    'geni_api_versions': {   '1': 'https://boss.instageni.washington.edu:12369/protogeni/xmlrpc/am/1.0',
                             '2': 'https://boss.instageni.washington.edu:12369/protogeni/xmlrpc/am/2.0',
                             '3': 'https://boss.instageni.washington.edu:12369/protogeni/xmlrpc/am/3.0'},
    'geni_request_rspec_versions': [   {   'extensions': [],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/0.1',
                                           'schema': 'http://www.protogeni.net/resources/rspec/0.1/reques
                                           'type': 'ProtoGENI',
                                           'version': '0.1'},
                                       {   'extensions': [],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/0.2',
                                           'schema': 'http://www.protogeni.net/resources/rspec/0.2/reques
                                           'type': 'ProtoGENI',
                                           'version': '0.2'},
                                       {   'extensions': [   'http://www.protogeni.net/resources/rspec/ex
                                           'namespace': 'http://www.protogeni.net/resources/rspec/2',
                                           'schema': 'http://www.protogeni.net/resources/rspec/2/request.
                                           'type': 'ProtoGENI',
                                           'version': '2'},
                                       {   'extensions': [   'http://www.protogeni.net/resources/rspec/ex
                                           'namespace': 'http://www.geni.net/resources/rspec/3',
                                           'schema': 'http://www.geni.net/resources/rspec/3/request.xsd',
                                           'type': 'GENI',
                                           'version': '3'}],
    'hostname': 'boss.instageni.washington.edu',
    'hrn': 'uwinstageni.cm',
    'interface': 'aggregate',
    'url': 'https://boss.instageni.washington.edu:12369/protogeni/xmlrpc/am',
    'urn': 'urn:publicid:IDN+instageni.washington.edu+authority+cm'}
09:25:03 INFO    :  ------------------------------------------------------
09:25:03 INFO    :  Completed getversion:
  Options as run:
		aggregate: ['washington-ig']
		framework: portal
		noGetVersionCache: True
		project: ln-test
  Args: getversion
  Result Summary: 
Got version for uwash-ig
09:25:03 INFO    :  ======================================================

The InstaGENI version in" 'code_tag':'59644b10cb058e22896f51ad801b8e23f0c18a97'" is the same as the other available InstaGENI sites:

Site InstaGENI Code tag
case.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
clemson.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
cornell.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
cs.princeton.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
gatech.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
gpolab.bbn.com 59644b10cb058e22896f51ad801b8e23f0c18a97
idre.ucla.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
illinois.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
iu.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
kettering.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
ku.gpeni.net 59644b10cb058e22896f51ad801b8e23f0c18a97
lan.sdn.uky.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
maxgigapop.net 59644b10cb058e22896f51ad801b8e23f0c18a97
metrodatacenter.com 59644b10cb058e22896f51ad801b8e23f0c18a97
missouri.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
northwestern.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
nps.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
nysernet.org 59644b10cb058e22896f51ad801b8e23f0c18a97
nyu.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
pks2.sdn.uky.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
rutgers.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
sox.net 59644b10cb058e22896f51ad801b8e23f0c18a97
umkc.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
utah.geniracks.net 59644b10cb058e22896f51ad801b8e23f0c18a97
utahddc.geniracks.net 59644b10cb058e22896f51ad801b8e23f0c18a97
utc.edu 59644b10cb058e22896f51ad801b8e23f0c18a97
washington.edu 59644b10cb058e22896f51ad801b8e23f0c18a97

Get list of "available" compute resources:

$ omni -a washington-ig listresources --available -o

Verified that Advertisement RSpec only includes available resources, as requested:

$ egrep "node comp|available now"  rspec-instageni-washing
<node component_manager_id="urn:publicid:IDN+instageni.washington.edu+authority+cm" component_name="procu
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.washington.edu+authority+cm" component_name="inter
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.washington.edu+authority+cm" component_name="pc3" 
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.washington.edu+authority+cm" component_name="pc5" 
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.washington.edu+authority+cm" component_name="pc4" 
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.washington.edu+authority+cm" component_name="pc1" 
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.washington.edu+authority+cm" component_name="pc2" 
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.washington.edu+authority+cm" component_name="inter
  <available now="true" />

Created a slice and a a 4 VMs sliver using the RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Washington/I

$ omni createsliver -a washington-ig IG-CT-1 IG-CT-1-washington.rspec
09:28:48 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
09:28:48 INFO    : Loading config file '/home/lnevers/.gcf/omni_config'
09:28:48 INFO    : Using control framework portal
09:28:48 INFO    : Member Authority is https://ch.geni.net/MA (from config)
09:28:48 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
09:28:48 INFO    : Substituting AM nickname washington-ig with URL https://instageni.washington.edu:12369/protogeni/xmlrpc/am, URN 
09:28:48 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-1 expires on 2015-02-18 15:19:13 UTC
09:28:48 INFO    : Creating sliver(s) from rspec file IG-CT-1-washington.rspec for slice urn:publicid:IDN+ch.geni.net:ln-test+slice
09:29:06 INFO    :  (PG log url - look here for details on any failures: https://www.instageni.washington.edu/spewlogfile.php3?logf
09:29:06 INFO    : Got return from CreateSliver for slice IG-CT-1 at uwash-ig:
09:29:06 INFO    : <?xml version="1.0" ?>
09:29:06 INFO    :   <!-- Reserved resources for:
	Slice: IG-CT-1
	at AM:
	URN: urn:publicid:IDN+instageni.washington.edu+authority+cm
	URL: https://instageni.washington.edu:12369/protogeni/xmlrpc/am
 -->
09:29:06 INFO    :   <rspec expires="2015-02-18T15:19:13Z" type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:flac

    <node client_id="xen1" component_id="urn:publicid:IDN+instageni.washington.edu+node+pc3" component_manager_id="urn:publicid:IDN
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh
        <interface client_id="xen1:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc3:eth1" mac_address="02
            <ip address="192.168.1.1" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pcvm3-1" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen1.IG-CT-1.ch-ge
    <node client_id="xen2" component_id="urn:publicid:IDN+instageni.washington.edu+node+pc3" component_manager_id="urn:publicid:IDN
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh
        <interface client_id="xen2:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc3:eth1" mac_address="02
            <ip address="192.168.1.2" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pcvm3-2" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen2.IG-CT-1.ch-ge
    <node client_id="xen3" component_id="urn:publicid:IDN+instageni.washington.edu+node+pc3" component_manager_id="urn:publicid:IDN
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh
        <interface client_id="xen3:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc3:eth1" mac_address="02
            <ip address="192.168.1.3" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pcvm3-3" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen3.IG-CT-1.ch-ge
    <node client_id="xen4" component_id="urn:publicid:IDN+instageni.washington.edu+node+pc3" component_manager_id="urn:publicid:IDN
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh
        <interface client_id="xen4:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc3:eth1" mac_address="02
            <ip address="192.168.1.4" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pcvm3-4" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen4.IG-CT-1.ch-ge
    <link client_id="lan0" sliver_id="urn:publicid:IDN+instageni.washington.edu+sliver+74" vlantag="258">    
        <component_manager name="urn:publicid:IDN+instageni.washington.edu+authority+cm"/>    
        <interface_ref client_id="xen1:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc3:eth1" sliver_id="
        <interface_ref client_id="xen2:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc3:eth1" sliver_id="
        <interface_ref client_id="xen3:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc3:eth1" sliver_id="
        <interface_ref client_id="xen4:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc3:eth1" sliver_id="
        <link_type name="lan"/>    
    </link>  
  <rs:site_info xmlns:rs="http://www.protogeni.net/resources/rspec/ext/site-info/1">    <rs:location country="US" latitude="47.6618
09:29:06 INFO    : Reservation at uwash-ig in slice IG-CT-1 expires at 2015-02-18 15:19:13 (UTC).
09:29:06 INFO    :  ------------------------------------------------------
09:29:06 INFO    :  Completed createsliver:
  Options as run:
		aggregate: ['washington-ig']
		framework: portal
		project: ln-test
  Args: createsliver IG-CT-1 IG-CT-1-washington.rspec
  Result Summary: Got Reserved resources RSpec from instageni-washington-edu. Reservation at uwash-ig in slice IG-CT-1 expires at 2
09:29:06 INFO    :  ======================================================

The following is login information for the sliver:

$ readyToLogin -a washington-ig IG-CT-1
<...>
xen4's geni_status is: ready 
User lnevers logs in to xen4 using:
	ssh -p 30013  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.washington.edu

xen3's geni_status is: ready 
User lnevers logs in to xen3 using:
	ssh -p 30012  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.washington.edu

xen2's geni_status is: ready 
User lnevers logs in to xen2 using:
	ssh -p 30011  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.washington.edu

xen1's geni_status is: ready 
User lnevers logs in to xen1 using:
	ssh -p 30010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.washington.edu

Measurements

Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth:

Iperf InstaGENI Washington VM-2 to VM-1 (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-02-12

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   715 MBytes   100 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec   143 MBytes  20.0 Mbits/sec
[  4]  0.0-60.1 sec   144 MBytes  20.0 Mbits/sec
[  7]  0.0-60.1 sec   143 MBytes  20.0 Mbits/sec
[  3]  0.0-60.1 sec   143 MBytes  20.0 Mbits/sec
[  6]  0.0-60.1 sec   144 MBytes  20.1 Mbits/sec
[SUM]  0.0-60.1 sec   717 MBytes   100 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 11]  0.0-60.0 sec  62.1 MBytes  8.68 Mbits/sec
[  9]  0.0-60.0 sec  63.0 MBytes  8.80 Mbits/sec
[  4]  0.0-60.0 sec  77.9 MBytes  10.9 Mbits/sec
[ 12]  0.0-60.1 sec  62.1 MBytes  8.68 Mbits/sec
[  5]  0.0-60.1 sec  78.4 MBytes  10.9 Mbits/sec
[ 10]  0.0-60.1 sec  63.8 MBytes  8.90 Mbits/sec
[  8]  0.0-60.2 sec  78.1 MBytes  10.9 Mbits/sec
[  6]  0.0-60.3 sec  78.4 MBytes  10.9 Mbits/sec
[  7]  0.0-60.3 sec  78.1 MBytes  10.9 Mbits/sec
[  3]  0.0-60.3 sec  78.1 MBytes  10.9 Mbits/sec
[SUM]  0.0-60.3 sec   720 MBytes   100 Mbits/sec

Iperf InstaGENI Washington VM-2 to the VM-1 (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512800 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   686 MBytes  96.0 Mbits/sec   0.108 ms 23185/512799 (4.5%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI Washington VM-2 to the VM-1

60 packets transmitted, 60 received, 0% packet loss, time 58998ms
rtt min/avg/max/mdev = 0.541/0.630/0.665/0.027 ms

IG-CT-2 - Access to New Site bare metal and VM resources

Created a slice and a sliver with one VM and one Raw PC using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTes

09:43:14 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'g IG-CT-2 ./IG-CT-2-washington.rspec 
09:43:14 INFO    : Loading config file '/home/lnevers/.gcf/omni_config'
09:43:14 INFO    : Using control framework portal
09:43:14 INFO    : Member Authority is https://ch.geni.net/MA (from config)
09:43:14 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
09:43:14 INFO    : Substituting AM nickname washington-ig with URL https://instageni.washington.edu:12369/protogeni/xml
09:43:14 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-2 expires on 2015-02-18 15:53:05 UTC
09:43:14 INFO    : Creating sliver(s) from rspec file ./IG-CT-2-washington.rspec for slice urn:publicid:IDN+ch.geni.net
09:43:31 INFO    :  (PG log url - look here for details on any failures: https://www.instageni.washington.edu/spewlogfi
09:43:31 INFO    : Got return from CreateSliver for slice IG-CT-2 at uwash-ig:
09:43:31 INFO    : <?xml version="1.0" ?>
09:43:31 INFO    :   <!-- Reserved resources for:
	Slice: IG-CT-2
	at AM:
	URN: urn:publicid:IDN+instageni.washington.edu+authority+cm
	URL: https://instageni.washington.edu:12369/protogeni/xmlrpc/am
 -->
09:43:31 INFO    :   <rspec expires="2015-02-18T15:53:05Z" type="manifest" xmlns="http://www.geni.net/resources/rspec/3

   <node client_id="VM" component_id="urn:publicid:IDN+instageni.washington.edu+node+pc2" component_manager_id="urn:pub
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authent
        <interface client_id="VM:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc2:eth1" mac_a
            <ip address="192.168.1.1" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pcvm2-2" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="VM.IG-
    <node client_id="PC" component_id="urn:publicid:IDN+instageni.washington.edu+node+pc4" component_manager_id="urn:pu
       <sliver_type name="raw-pc">
   </sliver_type>    
        <services>             <execute command="sudo yum install iperf -y" shell="sh"/>             <login authenticat
        <interface client_id="PC:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc4:eth1" mac_a
            <ip address="192.168.1.2" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode name="pc4" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="PC.IG-CT-2
    <link client_id="lan0" sliver_id="urn:publicid:IDN+instageni.washington.edu+sliver+92" vlantag="259">    
        <component_manager name="urn:publicid:IDN+instageni.washington.edu+authority+cm"/>    
        <interface_ref client_id="VM:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc2:eth1" s
        <interface_ref client_id="PC:if0" component_id="urn:publicid:IDN+instageni.washington.edu+interface+pc4:eth1" s
        <link_type name="lan"/>    
    </link>  
  <rs:site_info xmlns:rs="http://www.protogeni.net/resources/rspec/ext/site-info/1">    <rs:location country="US" latit
09:43:31 INFO    : Reservation at uwash-ig in slice IG-CT-2 expires at 2015-02-18 15:53:05 (UTC).
09:43:32 INFO    :  ------------------------------------------------------
09:43:32 INFO    :  Completed createsliver:

  Options as run:
		aggregate: ['washington-ig']
		framework: portal
		project: ln-test

  Args: createsliver IG-CT-2 ./IG-CT-2-washington.rspec

  Result Summary: Got Reserved resources RSpec from instageni-washington-edu. Reservation at uwash-ig in slice IG-CT-2 
09:43:32 INFO    :  ======================================================

Determined login information:

$ readyToLogin -a washington-ig IG-CT-2
<...>
PC's geni_status is: ready 
User lnevers logs in to PC using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.washington.edu

VM's geni_status is: changing 
User lnevers logs in to VM using:
	ssh -p 30522  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.washington.edu

Measurements

Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth:

Iperf InstaGENI Washington PC to VM (TCP) - TCP window size: 16.0 KByte (default)

Collected: 2015-02-12

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   711 MBytes  99.4 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   142 MBytes  19.9 Mbits/sec
[  6]  0.0-60.0 sec   145 MBytes  20.3 Mbits/sec
[  7]  0.0-60.1 sec   140 MBytes  19.6 Mbits/sec
[  5]  0.0-60.1 sec   144 MBytes  20.1 Mbits/sec
[  3]  0.0-60.2 sec   142 MBytes  19.8 Mbits/sec
[SUM]  0.0-60.2 sec   714 MBytes  99.6 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  71.6 MBytes  10.0 Mbits/sec
[ 11]  0.0-60.0 sec  72.2 MBytes  10.1 Mbits/sec
[ 10]  0.0-60.1 sec  71.8 MBytes  10.0 Mbits/sec
[  5]  0.0-60.1 sec  71.4 MBytes  9.96 Mbits/sec
[  8]  0.0-60.1 sec  71.4 MBytes  9.96 Mbits/sec
[  6]  0.0-60.1 sec  71.9 MBytes  10.0 Mbits/sec
[  3]  0.0-60.1 sec  71.9 MBytes  10.0 Mbits/sec
[  9]  0.0-60.2 sec  72.1 MBytes  10.1 Mbits/sec
[ 12]  0.0-60.2 sec  70.2 MBytes  9.79 Mbits/sec
[  7]  0.0-60.3 sec  72.2 MBytes  10.1 Mbits/sec
[SUM]  0.0-60.3 sec   717 MBytes  99.8 Mbits/sec

Iperf InstaGENI Washington PC to the VM (UDP) - UDP buffer size: 114 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512822 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   660 MBytes  92.2 Mbits/sec   0.074 ms 42175/512821 (8.2%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from InstaGENI Washington PC to VM

60 packets transmitted, 60 received, 0% packet loss, time 59006ms
rtt min/avg/max/mdev = 0.409/0.668/0.759/0.046 ms

Iperf InstaGENI Washington VM to PC (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-02-12

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   714 MBytes  99.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   206 MBytes  28.8 Mbits/sec
[  3]  0.0-60.1 sec   187 MBytes  26.2 Mbits/sec
[  6]  0.0-60.1 sec   133 MBytes  18.6 Mbits/sec
[  7]  0.0-60.1 sec  98.8 MBytes  13.8 Mbits/sec
[  5]  0.0-60.2 sec  95.9 MBytes  13.4 Mbits/sec
[SUM]  0.0-60.2 sec   721 MBytes   101 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  60.9 MBytes  8.51 Mbits/sec
[  9]  0.0-60.1 sec  57.8 MBytes  8.07 Mbits/sec
[  6]  0.0-60.1 sec  89.6 MBytes  12.5 Mbits/sec
[ 11]  0.0-60.2 sec  73.0 MBytes  10.2 Mbits/sec
[  7]  0.0-60.2 sec  68.0 MBytes  9.48 Mbits/sec
[  4]  0.0-60.3 sec  74.0 MBytes  10.3 Mbits/sec
[  5]  0.0-60.3 sec  63.8 MBytes  8.87 Mbits/sec
[ 12]  0.0-60.3 sec  78.0 MBytes  10.9 Mbits/sec
[  8]  0.0-60.4 sec  77.8 MBytes  10.8 Mbits/sec
[ 10]  0.0-60.4 sec  65.2 MBytes  9.06 Mbits/sec
[SUM]  0.0-60.4 sec   708 MBytes  98.3 Mbits/sec

Iperf InstaGENI Washington VM to the PC (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512782 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   688 MBytes  96.1 Mbits/sec   0.129 ms 22286/512781 (4.3%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI Washington VM to PC

60 packets transmitted, 60 received, 0% packet loss, time 59004ms
rtt min/avg/max/mdev = 0.603/0.702/0.775/0.026 ms

IG-CT-3 - Multiple sites experiment

Created a slice and a sliver with one VM container at Washington and one VM container at GPO using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/Ins

$ stitcher createsliver IG-CT-3 IG-CT-3-washington.rspec 
09:40:22 INFO    : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf
09:40:22 INFO    : Reading slice IG-CT-3 credential...
09:40:22 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-3 expires on 2015-02-18 15:59:58 UTC
09:40:23 INFO    : Multi-AM reservation will include resources from these aggregates:
09:40:23 INFO    : 	<Aggregate uwash-ig>
09:40:23 INFO    : 	<Aggregate gpo-ig>
09:40:23 INFO    : Stitcher doing createsliver at <Aggregate uwash-ig>...
09:40:39 INFO    : ... Allocation at <Aggregate uwash-ig> complete.
09:40:39 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:40:58 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
09:40:58 INFO    : All aggregates are complete.
09:40:58 INFO    : Your resources expire at 2015-02-18T14:30:23 (UTC). 
09:40:58 INFO    : Saved combined reservation RSpec at 2 AMs to file '/home/lnevers/gcf-test/instarspec/Washington/IG-CT-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-CT-3 at 2 Aggregates, creating 1 GRE link(s).

Determined login information at each Washington and GPO aggregate:

$ readyToLogin --useSliceAggregates IG-CT-3
  ....
VM-2's geni_status is: ready 
User lnevers logs in to VM-2 using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.washington.edu
 ....
VM-1's geni_status is: ready 
User lnevers logs in to VM-1 using:
	ssh -p 32314  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

Login to each site and verify connectivity:

Ping from InstaGENI GPO VM to the Washington VM

lnevers@vm-1:~$ ping 192.168.1.2 -c 60 -q
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.

--- 192.168.1.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59089ms
rtt min/avg/max/mdev = 77.780/104.662/218.617/30.135 ms
lnevers@vm-1:~$ 

Ping from InstaGENI Washington VM to GPO VM

lnevers@vm-2:~$ ping 192.168.1.1 -c 60 -q
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.

--- 192.168.1.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59070ms
rtt min/avg/max/mdev = 77.728/85.860/156.200/17.606 ms
lnevers@vm-2:~$ 

IG-CT-4 - Multiple sites OpenFlow experiment and interoperability

Site does not support GENI Meso-scale VLANs.

IG-CT-5 - Experiment Monitoring

GMOC Monitoring

Reviewed content of the GMOC Monitoring page for aggregates, and found the FOAM aggreg

Active OpenFlow Slivers:

List of OpenFlow Resources in use:

Monitoring shows Aggregate measurement for CPU utilization, Disk Utilization, Network Statistics and OF Datapath and Sliver Statistics:

GENI Monitoring

Checked for site's compute and foam aggregates:

Compute aggregate availability:

FOAM Aggregate availability:

External Checks for site aggregates:

No Experiments for External Check Stores - No meso-scale.

IG-CT-6 - Administrative Tests

Sent request for administrative account to site contact from the Washington InstaGENI aggregate page. Followed instructions at the InstaGENI Administration page for account request. A local administrator account was requested by joining the emulab-ops group at https://www.instageni.washington.edu/joinproject.php3. Once the administrative account was approved and the membership to emulab-ops was granted, proceeded to execute administrative tests.

LNM:~$ ssh control.instageni.washington.edu
The authenticity of host 'control.instageni.washington.edu (128.95.190.3)' can't be established.
DSA key fingerprint is fa:3a:98:17:87:2b:4b:ce:4c:5d:e2:71:10:59:40:14.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'control.instageni.washington.edu,128.95.190.3' (DSA) to the list of known hosts.
Welcome to Ubuntu precise (development branch) (GNU/Linux 3.2.0-23-generic x86_64)

 * Documentation:  https://help.ubuntu.com/

  System information as of Thu Feb 19 13:51:55 UTC 2015

  System load:             0.11
  Usage of /:              31.5% of 5.85GB
  Memory usage:            42%
  Swap usage:              0%
  Processes:               168
  Users logged in:         0
  IP address for xenbr0:   128.95.190.3
  IP address for xenbr0:1: 172.16.0.1
  IP address for xenbr0:2: 10.249.249.253
  IP address for xenbr1:   10.1.1.254
  IP address for xenbr2:   10.2.1.254
  IP address for xenbr3:   10.3.1.254
  IP address for tun0:     10.8.0.1

  Graph this data and manage this system at https://landscape.canonical.com/
New release '14.04.1 LTS' available.
Run 'do-release-upgrade' to upgrade to it.


The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

lnevers@control:~$ sudo whoami
root
lnevers@control:~$ uname -a
Linux control.instageni.washington.edu 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
lnevers@control:~$ 

Also access the boss node:

LNM:~$ ssh boss.instageni.washington.edu
Last login: Thu Feb 19 05:52:35 2015 from dhcp89-73-116.bbn.com
FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Mon Mar  3 15:37:17 MST 2014

Welcome to FreeBSD!

You can use aliases to decrease the amount of typing you need to do to get
commands you commonly use.  Examples of fairly popular aliases include (in
Bourne shell style, as in /bin/sh, bash, ksh, and zsh):

	alias lf="ls -FA"
	alias ll="ls -lA"
	alias su="su -m"

In csh or tcsh, these would be

	alias lf ls -FA
	alias ll ls -lA
	alias su su -m

To remove an alias, you can usually use 'unalias aliasname'.  To list all
aliases, you can usually type just 'alias'.
> bash
[lnevers@boss ~]$ sudo whoami
root
[lnevers@boss ~]$ uname -a
FreeBSD boss.instageni.washington.edu 9.0-STABLE FreeBSD 9.0-STABLE #0: Mon Mar  3 15:37:17 MST 2014     root@node.freebsd90-node.testbed.emulab.net:/usr/obj/usr/src/sys/TESTBED-XEN  i386
[lnevers@boss ~]$ 

From boss node accessed each of the experiment nodes that support VMs:

[lnevers@boss ~]$ for i in pc1 pc2 pc3; do ssh $i "echo -n '===> Host: ';hostname;sudo whoami;uname -a;echo"; done
Warning: Permanently added 'pc1.instageni.washington.edu' (RSA) to the list of known hosts.
===> Host: vhost1.shared-nodes.emulab-ops.instageni.washington.edu
root
Linux vhost1.shared-nodes.emulab-ops.instageni.washington.edu 3.8.0-37-generic #53~precise1 SMP Fri Mar 14 16:11:09 MDT 2014 x86_64 x86_64 x86_64 GNU/Linux

Warning: Permanently added 'pc2.instageni.washington.edu' (RSA) to the list of known hosts.
===> Host: vhost2.shared-nodes.emulab-ops.instageni.washington.edu
root
Linux vhost2.shared-nodes.emulab-ops.instageni.washington.edu 3.8.0-37-generic #53~precise1 SMP Fri Mar 14 16:11:09 MDT 2014 x86_64 x86_64 x86_64 GNU/Linux

Warning: Permanently added 'pc3.instageni.washington.edu' (RSA) to the list of known hosts.
===> Host: vhost3.shared-nodes.emulab-ops.instageni.washington.edu
root
Linux vhost3.shared-nodes.emulab-ops.instageni.washington.edu 3.8.0-37-generic #53~precise1 SMP Fri Mar 14 16:11:09 MDT 2014 x86_64 x86_64 x86_64 GNU/Linux

[lnevers@boss ~]$ 

In order to access Dedicated Nodes some experiment must be running on the raw-pc device. At the time of this capture two raw-pc nodes were in use (pc4 and pc5):

[lnevers@boss ~]$ for i in pc4 pc5 ; do sudo ssh $i "echo -n '===> Host: ';hostname;whoami;uname -a;echo"; done 

===> Host: pc2.ln2pc.ch-geni-net.instageni.washington.edu
root
Linux pc2.ln2pc.ch-geni-net.instageni.washington.edu 2.6.40-4.emulab2.fc15.i686.PAE #1 SMP Tue Feb 26 13:35:12 MST 2013 i686 i686 i38

===> Host: pc.ln2pc.ch-geni-net.instageni.washington.edu
root
Linux pc.ln2pc.ch-geni-net.instageni.washington.edu 2.6.40-4.emulab2.fc15.i686.PAE #1 SMP Tue Feb 26 13:35:12 MST 2013 i686 i686 i386

[lnevers@boss ~]$ 

Further verified access by ssh from ops.instageni.gpolab.bbn.com to boss.instageni.gpolab.bbn.com, which is usually restricted for non-admin users:

LNM:~$ ssh ops.instageni.washington.edu
The authenticity of host 'ops.instageni.washington.edu (128.95.190.5)' can't be established.
RSA key fingerprint is 46:63:92:67:c8:75:20:4e:52:9f:2d:f6:cb:58:16:77.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'ops.instageni.washington.edu,128.95.190.5' (RSA) to the list of known hosts.
FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Mon Mar  3 15:37:17 MST 2014

Welcome to FreeBSD!

"man firewall" will give advice for building a FreeBSD firewall
		-- David Scheidt <dscheidt@tumbolia.com>
> bash
[lnevers@ops ~]$ sudo whoami 
root
[lnevers@ops ~]$ ssh boss
The authenticity of host 'boss.instageni.washington.edu (128.95.190.4)' can't be established.
ECDSA key fingerprint is bd:05:23:a7:5b:cc:78:c8:8c:a8:d3:e9:f7:27:53:cb.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'boss.instageni.washington.edu' (ECDSA) to the list of known hosts.
Last login: Thu Feb 19 10:43:06 2015 from dhcp89-73-116.bbn.com
FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Mon Mar  3 15:37:17 MST 2014

Welcome to FreeBSD!

To erase a line you've written at the command prompt, use "Ctrl-U".
		-- Dru <genesis@istar.ca>
> bash
[lnevers@boss ~]$ 

Access infrastructure switches using documented password. First connect to the switch named procurve1 the control network switch:

[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
XXXXXXXXX
[lnevers@boss ~]$ sudo ssh manager@procurve1 
We'd like to keep you up to date about:
  * Software feature updates
  * New product announcements
  * Special events
Please register your products now at:  www.hp.com/networking/register


HP J9623A E2620-24 Switch
Software revision RA.15.08.0009

Copyright (C) 1991-2012 Hewlett-Packard Development Company, L.P.

                   RESTRICTED RIGHTS LEGEND
 Confidential computer software.  Valid license from HP required for possession,
 use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer
 Software, Computer Software Documentation, and Technical Data for Commercial
 Items are licensed to the U.S. Government under vendor's standard commercial
 license.
                   HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P. 
                   20555 State Highway 249, Houston, TX 77070

Press any key to continue
HP-E2620-24# 
HP-E2620-24# show version 
   ip address 10.1.1.253 255.255.255.0qaoff/code/build/xform(rel_galt_qaoff)
                May  9 2012 15:28:43
                RA.15.08.0009
                474
Boot Image:     Primary
HP-E2620-24# show vlans 

 Status and Counters - VLAN Information

  Maximum VLANs to support : 50                   
  Primary VLAN : DEFAULT_VLAN     
  Management VLAN : control-hardware 

  VLAN ID Name                             | Status     Voice Jumbo
  ------- -------------------------------- + ---------- ----- -----
  1       DEFAULT_VLAN                     | Port-based No    No   
  10      control-hardware                 | Port-based No    No   
  11      control-alternate                | Port-based No    No   
 

HP-E2620-24# show running-config 

Running configuration:

; J9623A Configuration Editor; Created on release #RA.15.08.0009
; Ver #02:13.2d:3c
hostname "HP-E2620-24"
max-vlans 50
no stack
no web-management
ip default-gateway 10.1.1.254
snmp-server community "xxx" unrestricted
aaa authentication ssh login public-key
aaa authentication ssh enable public-key
vlan 1
   name "DEFAULT_VLAN"
   no untagged 23-24
   untagged 1-22,25-28
   ip address 10.254.254.253 255.255.255.0
   ip igmp
   exit
vlan 10
   name "control-hardware"
   untagged 23
   exit
vlan 11
   name "control-alternate"
   untagged 24
   ip address 10.2.1.253 255.255.255.0
   exit
management-vlan 10
no dhcp config-file-update
password xxx
password xxx

HP-E2620-24# 

Connect to the switch named procurve2 the dataplane network switch via ssh using the documented password:

[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
xxxxxxx
[lnevers@boss ~]$ sudo ssh manager@procurve2
We'd like to keep you up to date about:
  * Software feature updates
  * New product announcements
  * Special events
Please register your products now at:  www.hp.com/networking/register


HP J8697A Switch E5406zl
Software revision K.15.06.5008

Copyright (C) 1991-2012 Hewlett-Packard Development Company, L.P.

                   RESTRICTED RIGHTS LEGEND
 Confidential computer software.  Valid license from HP required for possession,
 use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer
 Software, Computer Software Documentation, and Technical Data for Commercial
 Items are licensed to the U.S. Government under vendor's standard commercial
 license.
                   HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P. 
                   20555 State Highway 249, Houston, TX 77070

Press any key to continue
HP-E5406zl# show version 
Image stamp:    /ws/swbuildm/of_bridge_qaoff/code/build/btm(of_bridge_qaoff)
                Feb 18 2012 11:26:28
                K.15.06.5008
                79
Boot Image:     Primary
HP-E5406zl# show vlan

 Status and Counters - VLAN Information

  Maximum VLANs to support : 256                  
  Primary VLAN : DEFAULT_VLAN    
  Management VLAN : control-hardware

  VLAN ID Name                             | Status     Voice Jumbo
  ------- -------------------------------- + ---------- ----- -----
  1       DEFAULT_VLAN                     | Port-based No    No   
  10      control-hardware                 | Port-based No    No   
  257     5002                             | Port-based No    No   
  2309    5048                             | Port-based No    No   
 

HP-E5406zl# show running-config 

Running configuration:

; J8697A Configuration Editor; Created on release #K.15.06.5008
; Ver #02:10.0d:1f

hostname "HP-E5406zl" 
module 1 type J9549A 
module 2 type J9309A 
interface A1 
   speed-duplex auto-1000 
exit
interface A2 
   speed-duplex auto-1000 
exit
interface A3 
   speed-duplex auto-1000 
exit
interface A4 
   speed-duplex auto-1000 
exit
interface A5 
   speed-duplex auto-1000 
exit
interface A6 
   speed-duplex auto-1000 
exit
interface A7 
   speed-duplex auto-1000 
exit
interface A8 
   speed-duplex auto-1000 
exit
interface A9 
   speed-duplex auto-1000 
exit
interface A10 
   disable
   speed-duplex auto-1000 
exit
interface A13 
   disable
   speed-duplex auto-1000 
exit
ip default-gateway 10.3.1.7 
vlan 1 
   name "DEFAULT_VLAN" 
   forbid A1-A9 
   untagged A10-A19,A21-A24,B2-B4 
   no untagged A1-A9,A20,B1 
   no ip address 
   exit 
vlan 10 
   name "control-hardware" 
   untagged A20 
   ip address 10.3.1.253 255.255.255.0 
   exit 
vlan 257 
   name "5002" 
   untagged A1-A9 
   no ip address 
   exit 
vlan 2309 
   name "5048" 
   tagged A7,B1 
   no ip address 
   exit 
no web-management
snmp-server community "xxx" unrestricted
aaa authentication ssh login public-key
aaa authentication ssh enable public-key
management-vlan 10
no autorun
no dhcp config-file-update
no dhcp image-file-update
password xxx
password xxx

HP-E5406zl# 

Access the FOAM VM and gather information for version

LNM:~$ ssh boss.instageni.washington.edu
The authenticity of host 'boss.instageni.washington.edu (128.95.190.4)' can't be established.
RSA key fingerprint is 46:63:92:67:c8:75:20:4e:52:9f:2d:f6:cb:58:16:77.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'boss.instageni.washington.edu,128.95.190.4' (RSA) to the list of known hosts.
FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Mon Mar  3 15:37:17 MST 2014

Welcome to FreeBSD!

Connection to boss.instageni.washington.edu closed.
LNM:~$ ssh foam.instageni.washington.edu
The authenticity of host 'foam.instageni.washington.edu (128.95.190.6)' can't be established.
RSA key fingerprint is 05:e9:50:c0:a0:d3:a9:02:95:60:99:fc:6e:ef:14:3f.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'foam.instageni.washington.edu,128.95.190.6' (RSA) to the list of known hosts.
Welcome to Ubuntu 12.04.5 LTS (GNU/Linux 3.2.0-70-generic x86_64)

 * Documentation:  https://help.ubuntu.com/
New release '14.04.1 LTS' available.
Run 'do-release-upgrade' to upgrade to it.


The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

lnevers@foam:~$ sudo whoami 
root
lnevers@foam:~$ uname -a
Linux foam 3.2.0-70-generic #105-Ubuntu SMP Wed Sep 24 19:49:16 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
lnevers@foam:~$ sudo foamctl admin:get-version  --passwd-file=/etc/foam.passwd 
{
 "version": "0.14.0"
}
lnevers@foam:~$ }}}
Check FOAM configuration for  site.admin.email, geni.site-tag, email.from settings:
{{{
lnevers@foam:~$ foamctl config:get-value --key="site.admin.email"  --passwd-file=/etc/foam.passwd 
{
 "value": null
}
lnevers@foam:~$ foamctl config:get-value --key="geni.site-tag"  --passwd-file=/etc/foam.passwd 
{
 "value": "foam.instageni.washington.edu"
}
lnevers@foam:~$ foamctl config:get-value --key="email.from"  --passwd-file=/etc/foam.passwd 
{
 "value": "iancote@uw.edu"
}
lnevers@foam:~$ 

# check if FOAM auto-approve is on. Value 2 = auto-approve is on.

lnevers@foam:~$ foamctl config:get-value --key="geni.approval.approve-on-creation"  --passwd-file=/etc/foam.passwd 
{
 "value": 2
}
lnevers@foam:~$ 

}}}

Show FOAM slivers details:

{{{
lnevers@foam:~$ foamctl geni:list-slivers --passwd-file=/etc/foam.passwd
{
 "slivers": []
}
lnevers@foam:~$ 

}}}
Access the FlowVisor VM and gather version information:
{{{
LNM:~$ ssh flowvisor.instageni.washington.edu
The authenticity of host 'flowvisor.instageni.washington.edu (128.95.190.7)' can't be established.
RSA key fingerprint is 8c:01:f1:e7:2e:76:e2:22:e8:99:9d:68:e6:61:af:ae.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'flowvisor.instageni.washington.edu,128.95.190.7' (RSA) to the list of known hosts.
Welcome to Ubuntu 12.04.5 LTS (GNU/Linux 3.2.0-70-generic x86_64)

 * Documentation:  https://help.ubuntu.com/
New release '14.04.1 LTS' available.
Run 'do-release-upgrade' to upgrade to it.


The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

lnevers@flowvisor:~$ sudo whoami
root
lnevers@flowvisor:~$ uname  -a
Linux flowvisor 3.2.0-70-generic #105-Ubuntu SMP Wed Sep 24 19:49:16 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
lnevers@flowvisor:~$ 
}}}
Check the !FlowVisor version, list of devices, get details for a device, list of active slices, and details for one of the slices:
{{{     

lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd ping hello
Got reply:
PONG(fvadmin): FV version=flowvisor-0.8.17::hello
lnevers@flowvisor:~$ 

# Devices
lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listDevices
lnevers@flowvisor:~$ 

# Could not show device details
# fvctl --passwd-file=/etc/flowvisor.passwd getDeviceInfo 06:d6:6c:3b:e5:68:00:00

#Slices
lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listSlices
Slice 0: fvadmin
lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd getSliceInfo fvadmin
Got reply:
drop_policy=exact
contact_email=fvadmin@localhost
controller_hostname=none
controller_port=0
creator=fvadmin
lnevers@flowvisor:~$ 
}}}

Check the FlowVisor setting:
{{{
lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd dumpConfig /tmp/flowvisor-config
lnevers@flowvisor:~$ cat /tmp/flowvisor-config 
{
   "flowvisor": [
      {
         "api_webserver_port": 8080,
         "api_jetty_webserver_port": -1,
         "checkpointing": false,
         "listen_port": 6633,
         "track_flows": false,
         "stats_desc_hack": false,
         "run_topology_server": false,
         "logging": "NOTE",
         "log_ident": "flowvisor",
         "log_facility": "LOG_LOCAL7",
         "version": "flowvisor-0.9",
         "host": "localhost",
         "default_flood_perm": "fvadmin",
         "config_name": "default"
      }
   ],
   "Slice": [
      {
         "config_name": "default",
         "flowmap_type": "federated",
         "name": "fvadmin",
         "creator": "fvadmin",
         "passwd_crypt": "xxx",
         "passwd_salt": "xxx",
         "controller_hostname": "none",
         "controller_port": 0,
         "contact_email": "fvadmin@localhost",
         "drop_policy": "exact",
         "lldp_spam": true
      }
   ],
   "FlowSpaceRule": []
}lnevers@flowvisor:~$ 

}}}
----
{{{
#!html
Email <a href="mailto:help@geni.net"> help@geni.net </a> for GENI support or email <a href="mailto:luisa.nevers@bbn.com">me</a> with feedback on this page!
}}}

Attachments (8)

Download all attachments as: .zip