[[PageOutline(1-2)]] = University of Tennesse InstaGENI Confirmation Tests = For details about the tests in this page, see the '''[wiki:GENIRacksHome/InstageniRacks/SiteConfirmationTests InstaGENI Confirmation Tests]''' page.[[BR]] For site status see the '''[wiki:GENIRacksHome/InstageniRacks/ConfirmationTestStatus InstaGENI New Site Confirmation Tests Status]''' page. __Note:__ Omni nick_names for site aggregates used for these tests are: {{{ utc-ig=urn:publicid:IDN+instageni.utc.edu+authority+cm,https://instageni.utc.edu:12369/protogeni/xmlrpc/am utc-ig-of=urn:publicid:IDN+openflow:foam:foam.instageni.utc.edu+authority+am,https://foam.instageni.utc.edu:3626/foam/gapi/2 }}} == IG-CT-1 - Access to New Site VM resources == Got Aggregate version, which showed AM API V1, V2, and V3 are supported and V2 is default: {{{ $ omni getversion -a utc-ig 10:15:43 INFO : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache' 10:15:43 INFO : Loading config file '/home/lnevers/.gcf/omni_config' 10:15:43 INFO : Using control framework portal 10:15:43 INFO : Member Authority is https://ch.geni.net/MA (from config) 10:15:43 INFO : Slice Authority is https://ch.geni.net/SA (from config) 10:15:43 INFO : Substituting AM nickname utc-ig with URL https://instageni.utc.edu:12369/protogeni/xmlrpc/am, URN urn:publicid:IDN+instageni.utc.edu+authority+cm 10:15:45 INFO : (PG log url - look here for details on any failures: https://www.instageni.utc.edu/spewlogfile.php3?logfile=5198731e9c80c2223ff7d1905e430c50) 10:15:45 INFO : AM utc-ig URN: urn:publicid:IDN+instageni.utc.edu+authority+cm (url: https://instageni.utc.edu:12369/protogeni/xmlrpc/am) has version: ( (PG log url - look here for details on any failures: https://www.instageni.utc.edu/spewlogfile.php3?logfile=5198731e9c80c2223ff7d1905e430c50).) 10:15:45 INFO : { 'code_tag': '59644b10cb058e22896f51ad801b8e23f0c18a97', 'geni_ad_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1', 'http://www.protogeni.net/resources/rspec/ext/site-info/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1', 'http://www.protogeni.net/resources/rspec/ext/site-info/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd', 'type': 'GENI', 'version': '3'}], 'geni_api': 2, 'geni_api_versions': { '1': 'https://boss.instageni.utc.edu:12369/protogeni/xmlrpc/am/1.0', '2': 'https://boss.instageni.utc.edu:12369/protogeni/xmlrpc/am/2.0', '3': 'https://boss.instageni.utc.edu:12369/protogeni/xmlrpc/am/3.0'}, 'geni_request_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/request.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/request.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/request.xsd', 'type': 'GENI', 'version': '3'}], 'hostname': 'boss.instageni.utc.edu', 'hrn': 'chattanooga.cm', 'interface': 'aggregate', 'url': 'https://boss.instageni.utc.edu:12369/protogeni/xmlrpc/am', 'urn': 'urn:publicid:IDN+instageni.utc.edu+authority+cm'} 10:15:45 INFO : ------------------------------------------------------ 10:15:45 INFO : Completed getversion: Options as run: aggregate: ['utc-ig'] framework: portal noGetVersionCache: True project: ln-test Args: getversion Result Summary: Got version for utc-ig 10:15:45 INFO : ====================================================== }}} The InstaGENI version in" 'code_tag':'59644b10cb058e22896f51ad801b8e23f0c18a97'" is the same as the other available InstaGENI sites: || '''Site''' || ''' InstaGENI Code tag ''' || || case.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || clemson.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || cornell.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || cs.princeton.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || gatech.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || gpolab.bbn.com || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || idre.ucla.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || illinois.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || iu.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || kettering.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || ku.gpeni.net || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || lan.sdn.uky.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || maxgigapop.net || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || metrodatacenter.com || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || missouri.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || northwestern.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || nps.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || nysernet.org || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || nyu.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || pks2.sdn.uky.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || rutgers.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || sox.net || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || umkc.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || utah.geniracks.net || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || utahddc.geniracks.net || 59644b10cb058e22896f51ad801b8e23f0c18a97|| || utc.edu || 59644b10cb058e22896f51ad801b8e23f0c18a97|| Get list of "available" compute resources: {{{ $ omni -a utc-ig listresources --available -o }}} Verified that Advertisement RSpec only includes available resources, as requested: {{{ $ egrep "node comp|available now" rspec-instageni-utc-edu.xml }}} Created a slice and a 4 VMs sliver using the RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/UTC/IG-CT-1-utc.rspec IG-CT-1-utc.rspec]: {{{ $ omni createsliver -a utc-ig IG-CT-1 IG-CT-1-utc.rspec 10:29:56 INFO : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache' 10:29:56 INFO : Loading config file '/home/lnevers/.gcf/omni_config' 10:29:56 INFO : Using control framework portal 10:29:56 INFO : Member Authority is https://ch.geni.net/MA (from config) 10:29:56 INFO : Slice Authority is https://ch.geni.net/SA (from config) 10:29:56 INFO : Substituting AM nickname utc-ig with URL https://instageni.utc.edu:12369/protogeni/xmlrpc/am, URN urn:publicid:IDN+instageni.utc.edu+authority+cm 10:29:56 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-1 expires on 2015-02-18 15:19:13 UTC 10:29:56 INFO : Creating sliver(s) from rspec file IG-CT-1-utc.rspec for slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-1 10:30:14 INFO : (PG log url - look here for details on any failures: https://www.instageni.utc.edu/spewlogfile.php3?logfile=27e346678a4a44864abfe3c22cbc3726) 10:30:14 INFO : Got return from CreateSliver for slice IG-CT-1 at utc-ig: 10:30:14 INFO : 10:30:14 INFO : 10:30:14 INFO : 10:30:14 INFO : Reservation at utc-ig in slice IG-CT-1 expires at 2015-02-18 15:19:13 (UTC). 10:30:15 INFO : ------------------------------------------------------ 10:30:15 INFO : Completed createsliver: Options as run: aggregate: ['utc-ig'] framework: portal project: ln-test Args: createsliver IG-CT-1 IG-CT-1-utc.rspec Result Summary: Got Reserved resources RSpec from instageni-utc-edu. Reservation at utc-ig in slice IG-CT-1 expires at 2015-02-18 15:19:13 (UTC). 10:30:15 INFO : ====================================================== }}} The following is login information for the sliver: {{{ $ readyToLogin -a utc-ig IG-CT-1 <...> xen4's geni_status is: ready User lnevers logs in to xen4 using: ssh -p 30525 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.utc.edu xen3's geni_status is: ready User lnevers logs in to xen3 using: ssh -p 30524 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.utc.edu xen2's geni_status is: ready User lnevers logs in to xen2 using: ssh -p 30523 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.utc.edu xen1's geni_status is: ready User lnevers logs in to xen1 using: ssh -p 30522 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.utc.edu }}} === Measurements === Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth: '''Iperf InstaGENI UTC VM-2 to VM-1 (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-11'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 715 MBytes 99.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 147 MBytes 20.5 Mbits/sec [ 5] 0.0-60.0 sec 145 MBytes 20.3 Mbits/sec [ 4] 0.0-60.1 sec 144 MBytes 20.1 Mbits/sec [ 7] 0.0-60.1 sec 147 MBytes 20.5 Mbits/sec [ 6] 0.0-60.1 sec 146 MBytes 20.3 Mbits/sec [SUM] 0.0-60.1 sec 729 MBytes 102 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 10] 0.0-60.1 sec 59.4 MBytes 8.29 Mbits/sec [ 9] 0.0-60.1 sec 60.1 MBytes 8.39 Mbits/sec [ 7] 0.0-60.2 sec 77.4 MBytes 10.8 Mbits/sec [ 11] 0.0-60.2 sec 77.4 MBytes 10.8 Mbits/sec [ 8] 0.0-60.2 sec 77.8 MBytes 10.8 Mbits/sec [ 3] 0.0-60.2 sec 77.8 MBytes 10.8 Mbits/sec [ 5] 0.0-60.2 sec 77.4 MBytes 10.8 Mbits/sec [ 12] 0.0-60.3 sec 58.1 MBytes 8.09 Mbits/sec [ 4] 0.0-60.3 sec 77.8 MBytes 10.8 Mbits/sec [ 6] 0.0-60.3 sec 77.5 MBytes 10.8 Mbits/sec [SUM] 0.0-60.3 sec 720 MBytes 100 Mbits/sec }}} '''Iperf InstaGENI UTC VM-2 to the VM-1 (UDP) - UDP buffer size: 224 KByte (default)''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512783 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 686 MBytes 95.8 Mbits/sec 0.116 ms 23789/512782 (4.6%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UTC VM-2 to the VM-1 ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 58998ms rtt min/avg/max/mdev = 0.621/0.742/0.824/0.043 ms }}} == IG-CT-2 - Access to New Site bare metal and VM resources == Created a slice and a sliver with one VM and one Raw PC using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/UTC/IG-CT-2-utc.rspec IG-CT-2-utc.rspec] {{{ $ omni createsliver -a utc-ig IG-CT-2 IG-CT-2-utc.rspec 10:53:05 INFO : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache' 10:53:05 INFO : Loading config file '/home/lnevers/.gcf/omni_config' 10:53:05 INFO : Using control framework portal 10:53:05 INFO : Member Authority is https://ch.geni.net/MA (from config) 10:53:05 INFO : Slice Authority is https://ch.geni.net/SA (from config) 10:53:05 INFO : Substituting AM nickname utc-ig with URL https://instageni.utc.edu:12369/protogeni/xmlrpc/am, URN urn:publicid:IDN+instageni.utc.edu+authority+cm 10:53:05 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-2 expires on 2015-02-18 15:53:05 UTC 10:53:05 INFO : Creating sliver(s) from rspec file IG-CT-2-utc.rspec for slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-2 10:53:20 INFO : (PG log url - look here for details on any failures: https://www.instageni.utc.edu/spewlogfile.php3?logfile=dae745bd0ffbabbbe68f2d7a089a6957) 10:53:20 INFO : Got return from CreateSliver for slice IG-CT-2 at utc-ig: 10:53:20 INFO : 10:53:20 INFO : 10:53:20 INFO : 10:53:20 INFO : Reservation at utc-ig in slice IG-CT-2 expires at 2015-02-18 15:53:05 (UTC). 10:53:20 INFO : ------------------------------------------------------ 10:53:20 INFO : Completed createsliver: Options as run: aggregate: ['utc-ig'] framework: portal project: ln-test Args: createsliver IG-CT-2 IG-CT-2-utc.rspec Result Summary: Got Reserved resources RSpec from instageni-utc-edu. Reservation at utc-ig in slice IG-CT-2 expires at 2015-02-18 15:53:05 (UTC). 10:53:20 INFO : ====================================================== }}} Determined login information: {{{ $ readyToLogin -a utc-ig IG-CT-2 <...> PC's geni_status is: ready User lnevers logs in to PC using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.utc.edu VM's geni_status is: ready User lnevers logs in to VM using: ssh -p 30778 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.utc.edu }}} === Measurements === Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth: '''Iperf InstaGENI UTC PC to VM (TCP) - TCP window size: 16.0 KByte (default)''' ''Collected: 2015-02-11'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 710 MBytes 99.2 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 142 MBytes 19.8 Mbits/sec [ 6] 0.0-60.0 sec 144 MBytes 20.1 Mbits/sec [ 7] 0.0-60.1 sec 142 MBytes 19.8 Mbits/sec [ 5] 0.0-60.1 sec 143 MBytes 19.9 Mbits/sec [ 4] 0.0-60.1 sec 144 MBytes 20.1 Mbits/sec [SUM] 0.0-60.1 sec 714 MBytes 99.7 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 10] 0.0-60.0 sec 77.2 MBytes 10.8 Mbits/sec [ 9] 0.0-60.0 sec 76.4 MBytes 10.7 Mbits/sec [ 6] 0.0-60.0 sec 74.8 MBytes 10.4 Mbits/sec [ 8] 0.0-60.1 sec 63.4 MBytes 8.85 Mbits/sec [ 5] 0.0-60.1 sec 66.2 MBytes 9.25 Mbits/sec [ 12] 0.0-60.1 sec 77.6 MBytes 10.8 Mbits/sec [ 3] 0.0-60.2 sec 76.6 MBytes 10.7 Mbits/sec [ 7] 0.0-60.2 sec 63.9 MBytes 8.90 Mbits/sec [ 4] 0.0-60.2 sec 63.6 MBytes 8.87 Mbits/sec [ 11] 0.0-60.3 sec 76.8 MBytes 10.7 Mbits/sec [SUM] 0.0-60.3 sec 716 MBytes 99.7 Mbits/sec }}} '''Iperf InstaGENI UTC PC to the VM (UDP) - UDP buffer size: 114 KByte (default)''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 663 MBytes 92.6 Mbits/sec 0.077 ms 39819/512820 (7.8%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UTC PC to VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59048ms rtt min/avg/max/mdev = 0.563/0.670/0.712/0.028 ms }}} '''Iperf InstaGENI UTC VM to PC (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-11'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 715 MBytes 99.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 120 MBytes 16.8 Mbits/sec [ 4] 0.0-60.0 sec 173 MBytes 24.2 Mbits/sec [ 7] 0.0-60.1 sec 145 MBytes 20.2 Mbits/sec [ 5] 0.0-60.1 sec 130 MBytes 18.2 Mbits/sec [ 6] 0.0-60.2 sec 136 MBytes 19.0 Mbits/sec [SUM] 0.0-60.2 sec 704 MBytes 98.1 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 72.1 MBytes 10.1 Mbits/sec [ 11] 0.0-60.0 sec 67.8 MBytes 9.46 Mbits/sec [ 10] 0.0-60.1 sec 86.4 MBytes 12.1 Mbits/sec [ 5] 0.0-60.1 sec 61.8 MBytes 8.62 Mbits/sec [ 9] 0.0-60.2 sec 81.8 MBytes 11.4 Mbits/sec [ 4] 0.0-60.2 sec 58.5 MBytes 8.15 Mbits/sec [ 8] 0.0-60.3 sec 58.9 MBytes 8.20 Mbits/sec [ 12] 0.0-60.3 sec 67.9 MBytes 9.44 Mbits/sec [ 6] 0.0-60.4 sec 88.2 MBytes 12.3 Mbits/sec [ 3] 0.0-60.4 sec 69.5 MBytes 9.66 Mbits/sec [SUM] 0.0-60.4 sec 713 MBytes 99.0 Mbits/sec }}} '''Iperf InstaGENI UTC VM to the PC (UDP) - UDP buffer size: 224 KByte (default)''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 100 Mbits/sec [ 3] Sent 512659 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 686 MBytes 95.9 Mbits/sec 0.121 ms 23588/512658 (4.6%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UTC VM to PC ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 58998ms rtt min/avg/max/mdev = 0.457/0.655/0.688/0.050 ms }}} == IG-CT-3 - Multiple sites experiment == Created a slice and a sliver with one VM container at UTC and one VM container at GPO using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/UTC/IG-CT-3-utc.rspec IG-CT-3-utc.rspec]. Used stitcher to create both the CENIC and GPO slivers: {{{ $ stitcher createsliver IG-CT-3 IG-CT-3-utc.rspec 10:59:59 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 10:59:59 INFO : Reading slice IG-CT-3 credential... 11:00:00 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-3 expires on 2015-02-18 15:59:58 UTC 11:00:00 INFO : Multi-AM reservation will include resources from these aggregates: 11:00:00 INFO : 11:00:00 INFO : 11:00:00 INFO : Stitcher doing createsliver at ... 11:00:17 INFO : ... Allocation at complete. 11:00:17 INFO : Stitcher doing createsliver at ... 11:00:36 INFO : ... Allocation at complete. 11:00:36 INFO : All aggregates are complete. 11:00:36 INFO : Your resources expire at 2015-02-17T15:50:00 (UTC). 11:00:36 INFO : Saved combined reservation RSpec at 2 AMs to file '/home/lnevers/gcf-test/instarspec/UTC/IG-CT-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-CT-3 at 2 Aggregates, creating 1 GRE link(s). }}} Determined login information at each UTC and GPO aggregate: {{{ $ readyToLogin --useSliceAggregates IG-CT-3 .... VM-2's geni_status is: ready User lnevers logs in to VM-2 using: ssh -p 31034 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.utc.edu .... VM-1's geni_status is: ready User lnevers logs in to VM-1 using: ssh -p 31802 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com }}} Login to each site and verify connectivity: '''Ping from InstaGENI GPO VM to the UTC VM ''' {{{ [lnevers@VM-1 ~]$ ping 192.168.1.2 -c 60 -q PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data. --- 192.168.1.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59077ms rtt min/avg/max/mdev = 30.784/45.881/756.386/93.534 ms [lnevers@VM-1 ~]$ }}} '''Ping from InstaGENI UTC VM to GPO VM ''' {{{ [lnevers@VM-2 ~]$ ping 192.168.1.1 -c 60 -q PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 60 packets transmitted, 59 received, 1% packet loss, time 59101ms rtt min/avg/max/mdev = 30.712/33.531/119.672/14.167 ms [lnevers@VM-2 ~]$ }}} == IG-CT-4 - Multiple sites !OpenFlow experiment and interoperability == This site does not support GENI Meso-scale VLANs. == IG-CT-5 - Experiment Monitoring == === GMOC Monitoring === Reviewed content of the GMOC Monitoring page for [https://gmoc-db.grnoc.iu.edu/protected-openid/index.pl?method=aggregates aggregates], and found the FOAM aggregates. The UTC InstaGENI FOAM resources aggregate details: [[Image(UTC-FOAMAggregate.jpg)]] Active !OpenFlow Slivers: [[Image(UTC-OFSlivers.jpg)]] List of !OpenFlow Resources in use: [[Image(UTC-OFResources.jpg)]] Monitoring shows Aggregate measurement for CPU utilization, Disk Utilization, Network Statistics and OF Datapath and Sliver Statistics: [[Image(UTC-OFMonitoring.jpg)]] === GENI Monitoring === Checked for site's compute and foam aggregates: [[Image(UTC-genimon-aggregates.jpg)]] Compute aggregate availability: [[Image(UTC-genimon-compute.jpg, 60%)]] FOAM Aggregate availability: [[Image(UTC-genimon-foam.jpg, 60%)]] No Experiments for External Check Stores - No meso-scale. == IG-CT-6 - Administrative Tests == Sent request for administrative account to site contact from the [http://groups.geni.net/geni/wiki/GeniAggregate/UniversityOfTennesseeInstaGENI University of Tennesses InstaGENI] aggregate page. Followed instructions at the [http://groups.geni.net/geni/wiki/GENIRacksAdministration/InstaGENIAdministration InstaGENI Administration] page for account request. A local administrator account was requested by joining the ''emulab-ops'' group at https://www.instageni.utc.edu/joinproject.php3. Once the administrative account was approved and the membership to emulab-ops was granted, proceeded to execute administrative tests. {{{ LNM:~$ ssh control.instageni.utc.edu The authenticity of host 'control.instageni.utc.edu (150.182.135.3)' can't be established. DSA key fingerprint is 3a:b8:3f:3f:77:66:88:c0:c9:8d:dc:14:38:1e:ce:af. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'control.instageni.utc.edu,150.182.135.3' (DSA) to the list of known hosts. Welcome to Ubuntu precise (development branch) (GNU/Linux 3.2.0-23-generic x86_64) * Documentation: https://help.ubuntu.com/ System information as of Wed Feb 11 18:51:45 UTC 2015 System load: 0.0 Usage of /: 32.4% of 5.85GB Memory usage: 38% Swap usage: 0% Processes: 132 Users logged in: 1 IP address for xenbr0: 150.182.135.3 IP address for xenbr0:1: 172.16.0.1 IP address for xenbr0:2: 10.249.249.253 IP address for xenbr1: 10.1.1.254 IP address for xenbr2: 10.2.1.254 IP address for xenbr3: 10.3.1.254 IP address for tun0: 10.8.0.1 Graph this data and manage this system at https://landscape.canonical.com/ New release '14.04.1 LTS' available. Run 'do-release-upgrade' to upgrade to it. The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. To run a command as administrator (user "root"), use "sudo ". See "man sudo_root" for details. lnevers@utc:~$ sudo whoami root lnevers@utc:~$ uname -a Linux utc.control-nodes.geniracks.net 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lnevers@utc:~$ }}} Also access the boss node: {{{ LNM:~$ ssh boss.instageni.utc.edu The authenticity of host 'boss.instageni.utc.edu (150.182.135.4)' can't be established. RSA key fingerprint is 46:63:92:67:c8:75:20:4e:52:9f:2d:f6:cb:58:16:77. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'boss.instageni.utc.edu,150.182.135.4' (RSA) to the list of known hosts. FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Mon Mar 3 15:37:17 MST 2014 Welcome to FreeBSD! You can permanently set environment variables for your shell by putting them in a startup file for the shell. The name of the startup file varies depending on the shell - csh and tcsh uses .login, bash, sh, ksh and zsh use .profile. When using bash, sh, ksh or zsh, don't forget to export the variable. > bash [lnevers@boss ~]$ sudo whoami root [lnevers@boss ~]$ uname -a FreeBSD boss.instageni.utc.edu 9.0-STABLE FreeBSD 9.0-STABLE #0: Mon Mar 3 15:37:17 MST 2014 root@node.freebsd90-node.testbed.emulab.net:/usr/obj/usr/src/sys/TESTBED-XEN i386 [lnevers@boss ~]$ }}} From boss node accessed each of the experiment nodes that support VMs: {{{ [lnevers@boss ~]$ for i in pc1 pc2 pc3; do ssh $i "echo -n '===> Host: ';hostname;sudo whoami;uname -a;echo"; done Warning: Permanently added 'pc1.instageni.utc.edu' (RSA) to the list of known hosts. ===> Host: vhost1.shared-nodes.emulab-ops.instageni.utc.edu root Linux vhost1.shared-nodes.emulab-ops.instageni.utc.edu 3.8.0-37-generic #53~precise1 SMP Fri Mar 14 16:11:09 MDT 2014 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc2.instageni.utc.edu' (RSA) to the list of known hosts. ===> Host: vhost2.shared-nodes.emulab-ops.instageni.utc.edu root Linux vhost2.shared-nodes.emulab-ops.instageni.utc.edu 3.8.0-37-generic #53~precise1 SMP Fri Mar 14 16:11:09 MDT 2014 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc3.instageni.utc.edu' (RSA) to the list of known hosts. ===> Host: vhost3.shared-nodes.emulab-ops.instageni.utc.edu root Linux vhost3.shared-nodes.emulab-ops.instageni.utc.edu 3.8.0-37-generic #53~precise1 SMP Fri Mar 14 16:11:09 MDT 2014 x86_64 x86_64 x86_64 GNU/Linux [lnevers@boss ~]$ }}} In order to access Dedicated Nodes some experiment must be running on the raw-pc device. At the time of this capture two raw-pc nodes were in use (pc4 and pc5): {{{ [lnevers@boss ~]$ for i in pc4 pc5 ; do sudo ssh $i "echo -n '===> Host: ';hostname;whoami;uname -a;echo"; done ===> Host: pc2.ln2pc.ch-geni-net.instageni.utc.edu root Linux pc2.ln2pc.ch-geni-net.instageni.utc.edu 2.6.40-4.emulab2.fc15.i686.PAE #1 SMP Tue Feb 26 13:35:12 MST 2013 i686 i686 i386 GNU/Linux ===> Host: pc.ln2pc.ch-geni-net.instageni.utc.edu root Linux pc.ln2pc.ch-geni-net.instageni.utc.edu 2.6.40-4.emulab2.fc15.i686.PAE #1 SMP Tue Feb 26 13:35:12 MST 2013 i686 i686 i386 GNU/Linux [lnevers@boss ~]$ }}} Further verified access by ssh from ops.instageni.gpolab.bbn.com to boss.instageni.gpolab.bbn.com, which is usually restricted for non-admin users: {{{ LNM:~$ ssh ops.instageni.utc.edu The authenticity of host 'ops.instageni.utc.edu (150.182.135.5)' can't be established. RSA key fingerprint is 46:63:92:67:c8:75:20:4e:52:9f:2d:f6:cb:58:16:77. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'ops.instageni.utc.edu,150.182.135.5' (RSA) to the list of known hosts. FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Mon Mar 3 15:37:17 MST 2014 Welcome to FreeBSD! To change an environment variable in /bin/sh use: $ VARIABLE="value" $ export VARIABLE > bash [lnevers@ops ~]$ sudo whoami root [lnevers@ops ~]$ uname -a FreeBSD ops.instageni.utc.edu 9.0-STABLE FreeBSD 9.0-STABLE #0: Mon Mar 3 15:37:17 MST 2014 root@node.freebsd90-node.testbed.emulab.net:/usr/obj/usr/src/sys/TESTBED-XEN i386 [lnevers@ops ~]$ [lnevers@ops ~]$ ssh boss The authenticity of host 'boss.instageni.utc.edu (150.182.135.4)' can't be established. ECDSA key fingerprint is bd:05:23:a7:5b:cc:78:c8:8c:a8:d3:e9:f7:27:53:cb. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'boss.instageni.utc.edu' (ECDSA) to the list of known hosts. Last login: Wed Feb 11 13:52:25 2015 from dhcp89-73-116.bbn.com FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Mon Mar 3 15:37:17 MST 2014 Welcome to FreeBSD! Man pages are divided into section depending on topic. There are 9 different sections numbered from 1 (General Commands) to 9 (Kernel Developer's Manual). You can get an introduction to each topic by typing man intro In other words, to get the intro to general commands, type man 1 intro > bash [lnevers@boss ~]$ }}} Access infrastructure switches using documented password. First connect to the switch named procurve1 the control network switch: {{{ [lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd XXXXXXXXX [lnevers@boss ~]$ sudo ssh procurve1 Warning: Permanently added 'procurve1' (RSA) to the list of known hosts. We'd like to keep you up to date about: * Software feature updates * New product announcements * Special events Please register your products now at: www.hp.com/networking/register HP J9623A E2620-24 Switch Software revision RA.15.08.0009 Copyright (C) 1991-2012 Hewlett-Packard Development Company, L.P. RESTRICTED RIGHTS LEGEND Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P. 20555 State Highway 249, Houston, TX 77070 Press any key to continue HP-E2620-24# show version Image stamp: /ws/swbuildm/rel_galt_qaoff/code/build/xform(rel_galt_qaoff) May 9 2012 15:28:43 RA.15.08.0009 474 Boot Image: Primary HP-E2620-24# show vlans Status and Counters - VLAN Information Maximum VLANs to support : 50 Primary VLAN : DEFAULT_VLAN Management VLAN : control-hardware VLAN ID Name | Status Voice Jumbo ------- -------------------------------- + ---------- ----- ----- 1 DEFAULT_VLAN | Port-based No No 10 control-hardware | Port-based No No 11 control-alternate | Port-based No No HP-E2620-24# show interfaces Status and Counters - Port Counters Flow Bcast Port Total Bytes Total Frames Errors Rx Drops Tx Ctrl Limit ----- -------------- -------------- ------------ ------------ ---- ----- 1 2,119,556,120 10,806,668 0 0 off 0 2 454,777,253 3,353,638 0 0 off 0 3 64,059,538 8,372,448 0 0 off 0 4 409,581,674 3,241,668 0 0 off 0 5 997,687,555 9,368,375 0 0 off 0 6 334,217,828 2,786,821 0 0 off 0 7 2,987,414,315 8,522,266 0 0 off 0 8 385,874,261 3,064,565 0 0 off 0 9 2,381,476,800 8,000,632 0 0 off 0 10 443,058,573 3,272,131 0 0 off 0 11 0 0 0 0 off 0 12 0 0 0 0 off 0 13 0 0 0 0 off 0 14 0 0 0 0 off 0 15 0 0 0 0 off 0 16 0 0 0 0 off 0 17 0 0 0 0 off 0 18 0 0 0 0 off 0 19 0 0 0 0 off 0 20 0 0 0 0 off 0 21 0 0 0 0 off 0 22 419,506,286 3,463,213 0 0 off 0 23 20,915,540 119,273 0 0 off 0 24 20,860,242 118,791 0 0 off 0 25 1,049,060,030 55,811,479 0 0 off 0 26 618,154,550 46,588,823 0 0 off 0 27 0 0 0 0 off 0 28 0 0 0 0 off 0 HP-E2620-24# HP-E2620-24# show running-config Running configuration: ; J9623A Configuration Editor; Created on release #RA.15.08.0009 ; Ver #02:13.2d:3c hostname "HP-E2620-24" max-vlans 50 no stack no web-management ip default-gateway 10.1.1.254 snmp-server community "xxx" unrestricted aaa authentication ssh login public-key aaa authentication ssh enable public-key vlan 1 name "DEFAULT_VLAN" no untagged 23-24 untagged 1-22,25-28 ip address 10.192.10.121 255.255.255.0 ip address 10.254.254.253 255.255.255.0 ip igmp exit vlan 10 name "control-hardware" untagged 23 ip address 10.1.1.253 255.255.255.0 exit vlan 11 name "control-alternate" untagged 24 ip address 10.2.1.253 255.255.255.0 exit management-vlan 10 no dhcp config-file-update password xxx password xxx HP-E2620-24# }}} Connect to the switch named procurve2 the dataplane network switch via ssh using the documented password: {{{ [lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd xxxxxxx [lnevers@boss ~]$ sudo ssh manager@procurve2 We'd like to keep you up to date about: * Software feature updates * New product announcements * Special events Please register your products now at: www.hp.com/networking/register HP J8697A Switch E5406zl Software revision K.15.06.5008 Copyright (C) 1991-2012 Hewlett-Packard Development Company, L.P. RESTRICTED RIGHTS LEGEND Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P. 20555 State Highway 249, Houston, TX 77070 Press any key to continue HP-E5406zl# show version Image stamp: /ws/swbuildm/of_bridge_qaoff/code/build/btm(of_bridge_qaoff) Feb 18 2012 11:26:28 K.15.06.5008 79 Boot Image: Primary HP-E5406zl# show vlans Status and Counters - VLAN Information Maximum VLANs to support : 256 Primary VLAN : DEFAULT_VLAN Management VLAN : control-hardware VLAN ID Name | Status Voice Jumbo ------- -------------------------------- + ---------- ----- ----- 1 DEFAULT_VLAN | Port-based No No 10 control-hardware | Port-based No No 257 5000 | Port-based No No 3507 5057 | Port-based No No 3513 5042 | Port-based No No 3514 5041 | Port-based No No HP-E5406zl# show running-config Running configuration: ; J8697A Configuration Editor; Created on release #K.15.06.5008 ; Ver #02:10.0d:1f hostname "HP-E5406zl" module 1 type J9548A interface A1 speed-duplex auto-1000 exit interface A2 speed-duplex auto-1000 exit interface A3 speed-duplex auto-1000 exit interface A4 speed-duplex auto-1000 exit interface A5 speed-duplex auto-1000 exit interface A6 speed-duplex auto-1000 exit interface A7 speed-duplex auto-1000 exit interface A8 speed-duplex auto-1000 exit interface A9 speed-duplex auto-1000 exit interface A10 disable speed-duplex auto-1000 exit interface A13 disable speed-duplex auto-1000 exit ip default-gateway 10.3.1.254 vlan 1 name "DEFAULT_VLAN" forbid A1-A9 untagged A10-A19 no untagged A1-A9,A20-A22 no ip address exit vlan 10 name "control-hardware" untagged A20 ip address 10.3.1.253 255.255.255.0 exit vlan 257 name "5000" untagged A1-A9 no ip address exit vlan 3514 name "5041" tagged A21-A22 no ip address exit vlan 3513 name "5042" tagged A21-A22 no ip address exit vlan 3507 name "5057" tagged A7,A21 no ip address exit no web-management openflow vlan 3500 controller "tcp:192.1.249.185:33020" listener "ptcp:5000" fail-secure on exit vlan 3507 enable controller "tcp:192.1.249.185:33020" listener "ptcp:5001" fail-secure on exit exit snmp-server community "4c8a9a4d1749" unrestricted aaa authentication ssh login public-key aaa authentication ssh enable public-key management-vlan 10 no autorun no dhcp config-file-update no dhcp image-file-update password manager password operator HP-E5406zl# }}} Access the FOAM VM and gather information for version {{{ LNM:~$ ssh lnevers@foam.instageni.utc.edu The authenticity of host 'foam.instageni.utc.edu (150.182.135.6)' can't be established. RSA key fingerprint is 7b:a5:d8:29:49:61:bc:97:7d:0e:17:4b:19:23:05:e3. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'foam.instageni.utc.edu,150.182.135.6' (RSA) to the list of known hosts. Welcome to Ubuntu 12.04.5 LTS (GNU/Linux 3.2.0-75-generic x86_64) * Documentation: https://help.ubuntu.com/ New release '14.04.1 LTS' available. Run 'do-release-upgrade' to upgrade to it. The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. lnevers@foam:~$ sudo whoami root lnevers@foam:~$ uname -a Linux foam 3.2.0-75-generic #110-Ubuntu SMP Tue Dec 16 19:11:55 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux lnevers@foam:~$ sudo foamctl admin:get-version --passwd-file=/etc/foam.passwd { "version": "0.14.0" } lnevers@foam:~$ }}} Check FOAM configuration for site.admin.email, geni.site-tag, email.from settings: {{{ lnevers@foam:~$ foamctl config:get-value --key="site.admin.email" --passwd-file=/etc/foam.passwd { "value": null } lnevers@foam:~$ lnevers@foam:~$ foamctl config:get-value --key="geni.site-tag" --passwd-file=/etc/foam.passwd { "value": "foam.instageni.utc.edu" } lnevers@foam:~$ lnevers@foam:~$ foamctl config:get-value --key="email.from" --passwd-file=/etc/foam.passwd { "value": "christopher-howard@utc.edu" } # check if FOAM auto-approve is on. Value 2 = auto-approve is on. lnevers@foam:~$ foamctl config:get-value --key="geni.approval.approve-on-creation" --passwd-file=/etc/foam.passwd { "value": 2 } lnevers@foam:~$ }}} Show FOAM slivers details: {{{ lnevers@foam:~$ foamctl geni:list-slivers --passwd-file=/etc/foam.passwd { "slivers": [] } }}} Access the FlowVisor VM and gather version information: {{{ LNM:~$ ssh flowvisor.instageni.utc.edu The authenticity of host 'flowvisor.instageni.utc.edu (150.182.135.7)' can't be established. RSA key fingerprint is 63:e3:de:a2:22:19:68:f0:3a:3f:d8:8c:0f:e6:42:4b. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'flowvisor.instageni.utc.edu,150.182.135.7' (RSA) to the list of known hosts. Welcome to Ubuntu 12.04.5 LTS (GNU/Linux 3.2.0-75-generic x86_64) * Documentation: https://help.ubuntu.com/ New release '14.04.1 LTS' available. Run 'do-release-upgrade' to upgrade to it. The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. sudlnevers@flowvisor:~$ sudo whoami root lnevers@flowvisor:~$ uname -a Linux flowvisor 3.2.0-75-generic #110-Ubuntu SMP Tue Dec 16 19:11:55 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux lnevers@flowvisor:~$ }}} Check the !FlowVisor version, list of devices, get details for a device, list of active slices, and details for one of the slices: {{{ lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd ping hello Got reply: PONG(fvadmin): FV version=flowvisor-0.8.17::hello lnevers@flowvisor:~$ # Devices (FV not configured for this GPO configured rack) lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listDevices lnevers@flowvisor:~$ # (cannot executed, FV is not configured for this GPO configured rack) fvctl --passwd-file=/etc/flowvisor.passwd getDeviceInfo XXX #Slices lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listSlices Slice 0: fvadmin lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd getSliceInfo fvadmin Got reply: drop_policy=exact contact_email=fvadmin@localhost controller_hostname=none controller_port=0 creator=fvadmin lnevers@flowvisor:~$ }}} Check the FlowVisor setting: {{{ lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd dumpConfig /tmp/flowvisor-config lnevers@flowvisor:~$ cat /tmp/flowvisor-config { "flowvisor": [ { "api_webserver_port": 8080, "api_jetty_webserver_port": -1, "checkpointing": false, "listen_port": 6633, "track_flows": false, "stats_desc_hack": false, "run_topology_server": false, "logging": "NOTE", "log_ident": "flowvisor", "log_facility": "LOG_LOCAL7", "version": "flowvisor-0.9", "host": "localhost", "default_flood_perm": "fvadmin", "config_name": "default" } ], "Slice": [ { "config_name": "default", "flowmap_type": "federated", "name": "fvadmin", "creator": "fvadmin", "passwd_crypt": "xxx", "passwd_salt": "xxx", "controller_hostname": "none", "controller_port": 0, "contact_email": "fvadmin@localhost", "drop_policy": "exact", "lldp_spam": true } ], "FlowSpaceRule": [] }}} ---- {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}