Changes between Version 12 and Version 13 of GENIRacksHome/InstageniRacks/ConfirmationTestStatus/UCLA

Timestamp:

08/06/14 14:52:56 (10 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIRacksHome/InstageniRacks/ConfirmationTestStatus/UCLA

@@ -927 +927 @@
 }}}
 == IG-CT-5 - Experiment Monitoring ==
+
 == IG-CT-6 - Administrative Tests ==
+Sent request for administrative account to site contact from the [http://groups.geni.net/geni/wiki/GeniAggregate/UCLAInstaGENI UCLA InstaGENI] aggregate page.  Followed instructions at the [http://groups.geni.net/geni/wiki/GENIRacksAdministration/InstaGENIAdministration InstaGENI Administration] page for account request. A local administrator account was requested by joining the ''emulab-ops'' group at https://www.instageni.idre.ucla.edu/joinproject.php3.   Once the administrative account was approved and the membership to emulab-ops was granted, proceeded to execute administrative tests.  
+
+{{{
+LNM:~$ ssh control.instageni.idre.ucla.edu
+The authenticity of host 'control.instageni.idre.ucla.edu (164.67.126.3)' can't be established.
+DSA key fingerprint is 3a:93:4c:c8:88:c9:8f:23:4a:35:aa:ba:4c:01:f8:98.
+Are you sure you want to continue connecting (yes/no)? yes
+
+Welcome to Ubuntu precise (development branch) (GNU/Linux 3.2.0-23-generic x86_64)
+
+ * Documentation:  https://help.ubuntu.com/
+
+  System information as of Wed Aug  6 18:35:15 UTC 2014
+
+  System load:             0.0
+  Usage of /:              36.8% of 5.85GB
+  Memory usage:            34%
+  Swap usage:              0%
+  Processes:               169
+  Users logged in:         0
+  IP address for xenbr0:   164.67.126.3
+  IP address for xenbr0:1: 172.16.0.1
+  IP address for xenbr0:2: 10.249.249.253
+  IP address for xenbr1:   10.1.1.254
+  IP address for xenbr2:   10.2.1.254
+  IP address for xenbr3:   10.3.1.254
+  IP address for tun0:     10.8.0.1
+
+  Graph this data and manage this system at https://landscape.canonical.com/
+
+The programs included with the Ubuntu system are free software;
+the exact distribution terms for each program are described in the
+individual files in /usr/share/doc/*/copyright.
+
+Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
+applicable law.
+
+To run a command as administrator (user "root"), use "sudo <command>".
+See "man sudo_root" for details.
+
+lnevers@ucla:~$ sudo whoami
+root
+lnevers@ucla:~$ uname -a
+Linux ucla.control-nodes.geniracks.net 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
+lnevers@ucla:~$ 
+}}}
+
+Also access the boss node:
+{{{
+LNM:~$ ssh boss.instageni.idre.ucla.edu
+The authenticity of host 'boss.instageni.idre.ucla.edu (164.67.126.4)' can't be established.
+RSA key fingerprint is 46:63:92:67:c8:75:20:4e:52:9f:2d:f6:cb:58:16:77.
+Are you sure you want to continue connecting (yes/no)? yes
+Warning: Permanently added 'boss.instageni.idre.ucla.edu,164.67.126.4' (RSA) to the list of known hosts.
+FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Mon Mar  3 15:37:17 MST 2014
+
+Welcome to FreeBSD!
+
+You can search for documentation on a keyword by typing
+
+        apropos keyword
+> bash
+[lnevers@boss ~]$ sudo whoami
+root
+[lnevers@boss ~]$ uname -a
+FreeBSD boss.instageni.idre.ucla.edu 9.0-STABLE FreeBSD 9.0-STABLE #0: Mon Mar  3 15:37:17 MST 2014     root@node.freebsd90-node.testbed.emulab.net:/usr/obj/usr/src/sys/TESTBED-XEN  i386
+[lnevers@boss ~]$ 
+}}}
+
+From boss node accessed each of the experiment nodes that support VMs: 
+{{{
+[lnevers@boss ~]$ for i in pc1 pc2 pc3; do ssh $i "echo -n '===> Host: ';hostname;sudo whoami;uname -a;echo"; done
+Warning: Permanently added 'pc1.instageni.idre.ucla.edu' (RSA) to the list of known hosts.
+===> Host: vhost1.shared-nodes.emulab-ops.instageni.idre.ucla.edu
+root
+Linux vhost1.shared-nodes.emulab-ops.instageni.idre.ucla.edu 2.6.32-042stab049.6.emulab.1 #1 SMP Mon May 21 14:36:04 MDT 2012 x86_64 x86_64 x86_64 GNU/Linux
+
+Warning: Permanently added 'pc2.instageni.idre.ucla.edu' (RSA) to the list of known hosts.
+===> Host: vhost2.shared-nodes.emulab-ops.instageni.idre.ucla.edu
+root
+Linux vhost2.shared-nodes.emulab-ops.instageni.idre.ucla.edu 3.2.0-56-generic #86-Ubuntu SMP Wed Oct 23 09:20:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
+
+Warning: Permanently added 'pc3.instageni.idre.ucla.edu' (RSA) to the list of known hosts.
+===> Host: vhost3.shared-nodes.emulab-ops.instageni.idre.ucla.edu
+root
+Linux vhost3.shared-nodes.emulab-ops.instageni.idre.ucla.edu 3.2.0-56-generic #86-Ubuntu SMP Wed Oct 23 09:20:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
+
+[lnevers@boss ~]$ 
+}}}
+
+In order to access Dedicated Nodes an experiment was created to run on the raw-pc device. At the time of this capture two raw-pc nodes were in use (pc4 and pc5): 
+{{{
+[lnevers@boss ~]$ for i in pc4 pc5 ; do sudo ssh $i "echo -n '===> Host: ';hostname;whoami;uname -a;echo"; done
+===> Host: ucla-ig.ig-ct-4.ch-geni-net.instageni.idre.ucla.edu
+root
+Linux ucla-ig.ig-ct-4.ch-geni-net.instageni.idre.ucla.edu 2.6.40-4.emulab2.fc15.i686.PAE #1 SMP Tue Feb 26 13:35:12 MST 2013 i686 i686 i386 GNU/Linux
+
+===> Host: ucla-ig2.ig-ct-4.ch-geni-net.instageni.idre.ucla.edu
+root
+Linux ucla-ig2.ig-ct-4.ch-geni-net.instageni.idre.ucla.edu 2.6.40-4.emulab2.fc15.i686.PAE #1 SMP Tue Feb 26 13:35:12 MST 2013 i686 i686 i386 GNU/Linux
+
+[lnevers@boss ~]$ 
+
+}}}
+
+Further verified access by ssh from ops.instageni.gpolab.bbn.com to boss.instageni.gpolab.bbn.com, which is usually restricted for non-admin users: 
+{{{
+LNM:~$ ssh ops.instageni.idre.ucla.edu
+The authenticity of host 'ops.instageni.idre.ucla.edu (164.67.126.5)' can't be established.
+RSA key fingerprint is 46:63:92:67:c8:75:20:4e:52:9f:2d:f6:cb:58:16:77.
+Are you sure you want to continue connecting (yes/no)? yes
+Warning: Permanently added 'ops.instageni.idre.ucla.edu,164.67.126.5' (RSA) to the list of known hosts.
+FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Mon Mar  3 15:37:17 MST 2014
+
+Welcome to FreeBSD!
+
+To repeat the last command in the C shell, type "!!".
+                -- Dru <genesis@istar.ca>
+> bash
+[lnevers@ops ~]$ ssh boss
+The authenticity of host 'boss.instageni.idre.ucla.edu (164.67.126.4)' can't be established.
+ECDSA key fingerprint is bd:05:23:a7:5b:cc:78:c8:8c:a8:d3:e9:f7:27:53:cb.
+Are you sure you want to continue connecting (yes/no)? yes
+Warning: Permanently added 'boss.instageni.idre.ucla.edu' (ECDSA) to the list of known hosts.
+Last login: Wed Aug  6 11:36:26 2014 from 128.89.73.116
+FreeBSD 9.0-STABLE (TESTBED-XEN) #0: Mon Mar  3 15:37:17 MST 2014
+
+Welcome to FreeBSD!
+
+To see the output from when your computer started, run dmesg(8).  If it has
+been replaced with other messages, look at /var/run/dmesg.boot.
+                -- Francisco Reyes <lists@natserv.com>
+> bash
+[lnevers@boss ~]$  
+}}}
+Access infrastructure switches using documented password. First connect to the switch named procurve1 the control network switch: 
+{{{
+[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
+XXXXXXXXX
+[lnevers@boss ~]$ telnet procurve1 
+Trying 10.1.1.253...
+Connected to procurve1.
+Escape character is '^]'.
+
+HP J9623A E2620-24 Switch
+Software revision RA.15.08.0009
+
+Copyright (C) 1991-2012 Hewlett-Packard Development Company, L.P.
+
+                   RESTRICTED RIGHTS LEGEND
+ Confidential computer software.  Valid license from HP required for possession,
+ use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer
+ Software, Computer Software Documentation, and Technical Data for Commercial
+ Items are licensed to the U.S. Government under vendor's standard commercial
+ license.
+                   HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P. 
+                   20555 State Highway 249, Houston, TX 77070
+
+We'd like to keep you up to date about:
+  * Software feature updates
+  * New product announcements
+  * Special events
+Please register your products now at:  www.hp.com/networking/register
+
+Username: manager
+Password: 
+HP-E2620-24# 
+HP-E2620-24# show version
+Image stamp:    /ws/swbuildm/rel_galt_qaoff/code/build/xform(rel_galt_qaoff)
+                May  9 2012 15:28:43
+                RA.15.08.0009
+                474
+Boot Image:     Primary
+HP-E2620-24# show vlan
+
+ Status and Counters - VLAN Information
+
+  Maximum VLANs to support : 50                   
+  Primary VLAN : DEFAULT_VLAN     
+  Management VLAN : control-hardware 
+
+  VLAN ID Name                             | Status     Voice Jumbo
+  ------- -------------------------------- + ---------- ----- -----
+  1       DEFAULT_VLAN                     | Port-based No    No   
+  10      control-hardware                 | Port-based No    No   
+  11      control-alternate                | Port-based No    No   
+ 
+
+HP-E2620-24# show running-config 
+
+Running configuration:
+
+; J9623A Configuration Editor; Created on release #RA.15.08.0009
+; Ver #02:13.2d:3c
+hostname "HP-E2620-24"
+max-vlans 50
+no stack
+no web-management
+ip default-gateway 10.1.1.254
+snmp-server community "xxx" unrestricted
+aaa authentication ssh login public-key
+aaa authentication ssh enable public-key
+vlan 1
+   name "DEFAULT_VLAN"
+   no untagged 23-24
+   untagged 1-22,25-28
+   ip address 10.254.254.253 255.255.255.0
+   ip igmp
+   exit
+vlan 10
+   name "control-hardware"
+   untagged 23
+   ip address 10.1.1.253 255.255.255.0
+   exit
+vlan 11
+   name "control-alternate"
+   untagged 24
+   ip address 10.2.1.253 255.255.255.0
+   exit
+management-vlan 10
+no dhcp config-file-update
+password xxx
+password xxx
+
+HP-E2620-24# 
+}}}
+
+Connect to the switch named procurve2 the dataplane network switch via ssh using the documented password: 
+{{{
+[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
+xxxxxxx
+[lnevers@boss ~]$ telnet procurve2 
+Trying 10.3.1.253...
+Connected to procurve2.
+Escape character is '^]'.
+
+HP J8697A Switch E5406zl
+Software revision K.15.06.5008
+
+Copyright (C) 1991-2012 Hewlett-Packard Development Company, L.P.
+
+                   RESTRICTED RIGHTS LEGEND
+ Confidential computer software.  Valid license from HP required for possession,
+ use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer
+ Software, Computer Software Documentation, and Technical Data for Commercial
+ Items are licensed to the U.S. Government under vendor's standard commercial
+ license.
+                   HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P. 
+                   20555 State Highway 249, Houston, TX 77070
+
+We'd like to keep you up to date about:
+  * Software feature updates
+  * New product announcements
+  * Special events
+Please register your products now at:  www.hp.com/networking/register
+
+Username: manager
+Password: 
+HP-E5406zl# show version
+Image stamp:    /ws/swbuildm/of_bridge_qaoff/code/build/btm(of_bridge_qaoff)
+                Feb 18 2012 11:26:28
+                K.15.06.5008
+                79
+Boot Image:     Primary
+HP-E5406zl# show vlan
+
+ Status and Counters - VLAN Information
+
+  Maximum VLANs to support : 256                  
+  Primary VLAN : DEFAULT_VLAN    
+  Management VLAN : control-hardware
+
+  VLAN ID Name                             | Status     Voice Jumbo
+  ------- -------------------------------- + ---------- ----- -----
+  1       DEFAULT_VLAN                     | Port-based No    No   
+  10      control-hardware                 | Port-based No    No   
+  257     5000                             | Port-based No    No   
+  1855    5009                             | Port-based No    No   
+ 
+
+HP-E5406zl# show running-config 
+
+Running configuration:
+
+; J8697A Configuration Editor; Created on release #K.15.06.5008
+; Ver #02:10.0d:1f
+
+hostname "HP-E5406zl" 
+module 1 type J9549A 
+interface A1 
+   speed-duplex auto-1000 
+exit
+interface A2 
+   speed-duplex auto-1000 
+exit
+interface A3 
+   speed-duplex auto-1000 
+exit
+interface A4 
+   speed-duplex auto-1000 
+exit
+interface A5 
+   speed-duplex auto-1000 
+exit
+interface A6 
+   speed-duplex auto-1000 
+exit
+interface A7 
+   speed-duplex auto-1000 
+exit
+interface A8 
+   speed-duplex auto-1000 
+exit
+interface A9 
+   speed-duplex auto-1000 
+exit
+interface A10 
+   speed-duplex auto-1000 
+exit
+interface A13 
+   speed-duplex auto-1000 
+exit
+ip default-gateway 10.3.1.7 
+vlan 1 
+   name "DEFAULT_VLAN" 
+   forbid A1-A9 
+   untagged A11-A12,A14-A19,A21-A23 
+   no untagged A1-A10,A13,A20,A24 
+   no ip address 
+   exit 
+vlan 10 
+   name "control-hardware" 
+   untagged A20 
+   ip address 10.3.1.253 255.255.255.0 
+   exit 
+vlan 257 
+   name "5000" 
+   untagged A1-A9 
+   no ip address 
+   exit 
+vlan 1855 
+   name "5009" 
+   tagged A1,A4,A10,A13,A24 
+   no ip address 
+   exit 
+no web-management
+openflow
+   vlan 1855
+      enable
+      controller "tcp:10.3.1.7:6633" fail-secure on
+      exit
+   exit
+snmp-server community "xxx" unrestricted
+aaa authentication ssh login public-key
+aaa authentication ssh enable public-key
+management-vlan 10
+no autorun
+no dhcp config-file-update
+no dhcp image-file-update
+password xxx
+password xxx
+
+HP-E5406zl# 
+}}}
+
+Access the FOAM VM and gather information for version
+{{{
+LNM:~$ ssh foam.instageni.idre.ucla.edu
+The authenticity of host 'foam.instageni.idre.ucla.edu (164.67.126.6)' can't be established.
+RSA key fingerprint is 57:26:26:b8:19:be:05:ed:1b:38:19:65:0e:7b:41:78.
+Are you sure you want to continue connecting (yes/no)? yes
+Warning: Permanently added 'foam.instageni.idre.ucla.edu,164.67.126.6' (RSA) to the list of known hosts.
+Welcome to Ubuntu 12.04.4 LTS (GNU/Linux 3.2.0-65-generic x86_64)
+
+ * Documentation:  https://help.ubuntu.com/
+
+The programs included with the Ubuntu system are free software;
+the exact distribution terms for each program are described in the
+individual files in /usr/share/doc/*/copyright.
+
+Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
+applicable law.
+
+lnevers@foam:~$ sudo foamctl admin:get-version  --passwd-file=/etc/foam.passwd 
+{
+ "version": "0.14.0"
+}
+lnevers@foam:~$ 
+}}}
+Check FOAM configuration for  site.admin.email, geni.site-tag, email.from settings:
+{{{
+lnevers@foam:~$ foamctl config:get-value --key="site.admin.email"  --passwd-file=/etc/foam.passwd 
+{
+ "value": null
+}
+lnevers@foam:~$ 
+lnevers@foam:~$ foamctl config:get-value --key="geni.site-tag"  --passwd-file=/etc/foam.passwd 
+{
+ "value": "foam.instageni.idre.ucla.edu"
+}
+lnevers@foam:~$ 
+lnevers@foam:~$ foamctl config:get-value --key="email.from"  --passwd-file=/etc/foam.passwd 
+{
+ "value": "jit@ucla.edu"
+}
+lnevers@foam:~$ 
+
+# check if FOAM auto-approve is on. Value 2 = auto-approve is on.
+
+foamctl config:get-value --key="geni.approval.approve-on-creation"  --passwd-file=/etc/foam.passwd 
+
+}}}
+
+Show FOAM slivers details:
+
+{{{
+lnevers@foam:~$ foamctl config:get-value --key="geni.approval.approve-on-creation"  --passwd-file=/etc/foam.passwd 
+{
+ "value": 2
+}
+}}}
+Access the FlowVisor VM and gather version information:
+{{{
+LNM:~$ ssh flowvisor.instageni.idre.ucla.edu
+The authenticity of host 'flowvisor.instageni.idre.ucla.edu (164.67.126.7)' can't be established.
+RSA key fingerprint is ed:09:69:f6:87:05:4e:1b:67:3b:14:42:a2:b4:e6:fd.
+Are you sure you want to continue connecting (yes/no)? yes
+Warning: Permanently added 'flowvisor.instageni.idre.ucla.edu,164.67.126.7' (RSA) to the list of known hosts.
+Welcome to Ubuntu 12.04.4 LTS (GNU/Linux 3.2.0-65-generic x86_64)
+
+ * Documentation:  https://help.ubuntu.com/
+
+The programs included with the Ubuntu system are free software;
+the exact distribution terms for each program are described in the
+individual files in /usr/share/doc/*/copyright.
+
+Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
+applicable law.
+
+lnevers@flowvisor:~$ sudo whoami
+root
+lnevers@flowvisor:~$ 
+}}}
+Check the !FlowVisor version, list of devices, get details for a device, list of active slices, and details for one of the slices:
+{{{     
+
+lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd ping hello
+Got reply:
+PONG(fvadmin): FV version=flowvisor-0.8.17::hello
+
+
+# Devices
+lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listDevices
+Device 0: 07:3f:2c:59:e5:5c:ed:00
+
+lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd getDeviceInfo 07:3f:2c:59:e5:5c:ed:00
+nPorts=6
+portList=24,65534,1,10,13,4
+dpid=07:3f:2c:59:e5:5c:ed:00
+remote=/10.3.1.7:6633-->/10.3.1.253:57967
+portNames=A24(24),local(65534),A1(1),A10(10),A13(13),A4(4)
+
+#Slices
+lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listSlices
+Slice 0: fvadmin
+Slice 1: b049f933-540e-4901-a7e0-76b539d6ed32
+Slice 2: 16f93731-1c53-4406-9446-8d7a7da19b7d
+Slice 3: d2e31929-b2f4-46b7-9ca1-c62ab899e6eb
+
+lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd getSliceInfo d2e31929-b2f4-46b7-9ca1-c62ab899e6eb
+Got reply:
+drop_policy=exact
+connection_1=07:3f:2c:59:e5:5c:ed:00-->/164.67.126.7:48319-->mallorea.gpolab.bbn.com/192.1.249.185:33020
+contact_email=lnevers@bbn.com
+controller_hostname=mallorea.gpolab.bbn.com
+controller_port=33020
+creator=fvadmin
+
+}}}
+
+Check the FlowVisor setting:
+{{{
+lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd dumpConfig /tmp/flowvisor-config
+lnevers@flowvisor:~$ more /tmp/flowvisor-config 
+{
+   "flowvisor": [
+      {
+         "api_webserver_port": 8080,
+         "api_jetty_webserver_port": -1,
+         "checkpointing": false,
+         "listen_port": 6633,
+         "track_flows": false,
+         "stats_desc_hack": false,
+         "run_topology_server": false,
+         "logging": "NOTE",
+         "log_ident": "flowvisor",
+         "log_facility": "LOG_LOCAL7",
+         "version": "flowvisor-0.9",
+         "host": "localhost",
+         "default_flood_perm": "fvadmin",
+         "config_name": "default"
+      }
+   ],
+   "Slice": [
+      {
+         "config_name": "default",
+         "flowmap_type": "federated",
+         "name": "fvadmin",
+         "creator": "fvadmin",
+         "passwd_crypt": "xxx",
+         "passwd_salt": "xxx",
+         "controller_hostname": "none",
+         "controller_port": 0,
+         "contact_email": "fvadmin@localhost",
+         "drop_policy": "exact",
+         "lldp_spam": true
+      },
+      {
+         "config_name": "default",
+         "flowmap_type": "federated",
+         "name": "b049f933-540e-4901-a7e0-76b539d6ed32",
+         "creator": "fvadmin",
+         "passwd_crypt": "xxx",
+         "passwd_salt": "xxx",
+         "controller_hostname": "hafmet.gpolab.bbn.com",
+         "controller_port": 33012,
+         "contact_email": "tupty@bbn.com",
+         "drop_policy": "exact",
+         "lldp_spam": true
+      },
+      {
+         "config_name": "default",
+         "flowmap_type": "federated",
+         "name": "16f93731-1c53-4406-9446-8d7a7da19b7d",
+         "creator": "fvadmin",
+         "passwd_crypt": "xxx",
+         "passwd_salt": "-xxx",
+         "controller_hostname": "hafmet.gpolab.bbn.com",
+         "controller_port": 31750,
+         "contact_email": "tupty@bbn.com",
+         "drop_policy": "exact",
+         "lldp_spam": true
+      },
+      {
+         "config_name": "default",
+         "flowmap_type": "federated",
+         "name": "d2e31929-b2f4-46b7-9ca1-c62ab899e6eb",
+         "creator": "fvadmin",
+         "passwd_crypt": "xxx",
+         "passwd_salt": "xxx",
+         "controller_hostname": "mallorea.gpolab.bbn.com",
+         "controller_port": 33020,
+         "contact_email": "lnevers@bbn.com",
+         "drop_policy": "exact",
+         "lldp_spam": true
+      }
+   ],
+   "FlowSpaceRule": [
+      {
+         "dpid": "73f2c59e55ced00",
+         "priority": 2000,
+         "in_port": 0,
+         "dl_type": 2048,
+         "nw_src": 168900352,
+         "nw_dst": 168900352,
+         "wildcards": 3279087,
+         "slice_action": [
+            {
+               "b049f933-540e-4901-a7e0-76b539d6ed32": 4
+            }
+         ]
+      },
+      {
+         "dpid": "73f2c59e55ced00",
+         "priority": 2000,
+         "in_port": 0,
+         "dl_type": 2054,
+         "nw_src": 168900352,
+         "nw_dst": 168900352,
+         "wildcards": 3279087,
+         "slice_action": [
+            {
+               "b049f933-540e-4901-a7e0-76b539d6ed32": 4
+            }
+         ]
+      },
+      {
+         "dpid": "73f2c59e55ced00",
+         "priority": 2000,
+         "in_port": 0,
+         "dl_type": 2048,
+         "nw_src": 171048960,
+         "nw_dst": 171048960,
+         "wildcards": 3412207,
+         "slice_action": [
+            {
+               "16f93731-1c53-4406-9446-8d7a7da19b7d": 4
+            }
+         ]
+      },
+      {
+         "dpid": "73f2c59e55ced00",
+         "priority": 2000,
+         "in_port": 0,
+         "dl_type": 2054,
+         "nw_src": 171048960,
+         "nw_dst": 171048960,
+         "wildcards": 3412207,
+         "slice_action": [
+            {
+               "16f93731-1c53-4406-9446-8d7a7da19b7d": 4
+            }
+         ]
+      },
+      {
+         "dpid": "73f2c59e55ced00",
+         "priority": 2000,
+         "in_port": 0,
+         "dl_type": 2048,
+         "nw_src": 170527488,
+         "nw_dst": 170527488,
+         "wildcards": 3279087,
+         "slice_action": [
+            {
+               "d2e31929-b2f4-46b7-9ca1-c62ab899e6eb": 4
+            }
+         ]
+      },
+      {
+         "dpid": "73f2c59e55ced00",
+         "priority": 2000,
+         "in_port": 0,
+         "dl_type": 2054,
+         "nw_src": 170527488,
+         "nw_dst": 170527488,
+         "wildcards": 3279087,
+         "slice_action": [
+            {
+               "d2e31929-b2f4-46b7-9ca1-c62ab899e6eb": 4
+            }
+         ]
+      }
+   ]
+}
+lnevers@flowvisor:~$  
+}}}
 
 ----