[[PageOutline(1-2)]] = Northwestern University InstaGENI Confirmation Tests = For details about the tests in this page, see the '''[wiki:GENIRacksHome/InstageniRacks/SiteConfirmationTests ExoGENI Confirmation Tests]''' page.[[BR]] For site status see the '''[wiki:GENIRacksHome/InstageniRacks/ConfirmationTestStatus InstaGENI New Site Confirmation Tests Status]''' page. __Note:__ Omni nick_names for site aggregate used for these tests are: {{{ ig-northwestern=,http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0 ig-gpo=,http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0 ig-of-northwestern=,https://foam.instageni.northwestern.edu:3626/foam/gapi/1 ig-of-gpo=,https://foam.gpolab.bbn.com:3626/foam/gapi/1 }}} == IG-CT-1 - Access to New Site VM resources == Got Aggregate version, which showed AM API V1, V2, and V3 are supported and V2 is default: {{{ $ omni.py getversion -a ig-northwestern INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni: (PG log url - look here for details on any failures: https://www.instageni.northwestern.edu/spewlogfile.php3?logfile=38074d2769d7feac07c7492c6821f25d) INFO:omni:AM URN: unspecified_AM_URN (url: http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0) has version: ( (PG log url - look here for details on any failures: https://www.instageni.northwestern.edu/spewlogfile.php3?logfile=38074d2769d7feac07c7492c6821f25d). (PG log url - look here for details on any failures: https://www.instageni.northwestern.edu/spewlogfile.php3?logfile=38074d2769d7feac07c7492c6821f25d)) INFO:omni:{ 'code_tag': '99a2b1f03656cb665918eebd2b95434a6d3e50f9', 'geni_ad_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd', 'type': 'GENI', 'version': '3'}], 'geni_api': 2, 'geni_api_versions': { '1': 'https://boss.instageni.northwestern.edu:12369/protogeni/xmlrpc/am/1.0', '2': 'https://boss.instageni.northwestern.edu:12369/protogeni/xmlrpc/am/2.0', '3': 'https://boss.instageni.northwestern.edu:12369/protogeni/xmlrpc/am/3.0'}, 'geni_request_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/request.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/request.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/request.xsd', 'type': 'GENI', 'version': '3'}], 'hostname': 'boss.instageni.northwestern.edu', 'hrn': 'nuinstageni.cm', 'interface': 'aggregate', 'url': 'https://boss.instageni.northwestern.edu:12369/protogeni/xmlrpc/am', 'urn': 'urn:publicid:IDN+instageni.northwestern.edu+authority+cm'} INFO:omni: ------------------------------------------------------------ INFO:omni: Completed getversion: Options as run: aggregate: ['ig-northwestern'] framework: pg noGetVersionCache: True Args: getversion Result Summary: Got version for http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0 INFO:omni: ============================================================ }}} The InstaGENI version in" 'code_tag':'99a2b1f03656cb665918eebd2b95434a6d3e50f9'" is the same as the other two available InstaGENI site (GPO and Utah): {{{ IG GPO: { 'code_tag': '99a2b1f03656cb665918eebd2b95434a6d3e50f9' IG Northwestern:{ 'code_tag': '99a2b1f03656cb665918eebd2b95434a6d3e50f9', IG Utah: { 'code_tag': '99a2b1f03656cb665918eebd2b95434a6d3e50f9' }}} Get list of "available" compute resources: {{{ $ omni.py -a ig-northwestern listresources --available -o INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Saving output to a file. INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Listed advertised resources at 1 out of 1 possible aggregates. INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni: (PG log url - look here for details on any failures: https://www.instageni.northwestern.edu/spewlogfile.php3?logfile=bdd0d93ad32c2cc98574ca9d201c4ad3) INFO:omni:Writing to 'rspec-instageni-northwestern-edu-protogeniv2.xml' INFO:omni: ------------------------------------------------------------ INFO:omni: Completed listresources: Options as run: aggregate: ['ig-northwestern'] framework: pg geni_available: True output: True Args: listresources Result Summary: Queried resources from 1 of 1 aggregate(s). Wrote rspecs from 1 aggregate(s) to 1 file(s) Saved listresources RSpec at 'unspecified_AM_URN' (url 'http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0') to file rspec-instageni-northwestern-edu-protogeniv2.xml; (PG log url - look here for details on any failures: https://www.instageni.northwestern.edu/spewlogfile.php3?logfile=bdd0d93ad32c2cc98574ca9d201c4ad3) INFO:omni: ============================================================ }}} Verified that Advertisement RSpec only includes available resources, as requested: {{{ $ egrep "node comp|available now" rspec-instageni-northwestern-edu-protogeniv2.xml }}} Created a slice: {{{ $ omni.py createslice IG-CT-1 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Created slice with Name IG-CT-1, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-1, Expiration 2013-02-17 20:06:13+00:00 INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createslice: Options as run: framework: pg Args: createslice IG-CT-1 Result Summary: Created slice with Name IG-CT-1, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-1, Expiration 2013-02-17 20:06:13+00:00 INFO:omni: ============================================================ }}} Created a 4 VMs sliver using the RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Northwestern/IG-CT-1-nw.rspec IG-CT-1-nw.rspec]: {{{ $ omni.py createsliver -a ig-northwestern IG-CT-1 IG-CT-1-nw.rspec INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-1 expires on 2013-02-17 20:06:13 UTC INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file IG-CT-1-nw.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-1 INFO:omni: (PG log url - look here for details on any failures: https://www.instageni.northwestern.edu/spewlogfile.php3?logfile=83e80c35471dbe4092e2e16d60a8ded2) INFO:omni:Got return from CreateSliver for slice IG-CT-1 at http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0: INFO:omni: INFO:omni: INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: ['ig-northwestern'] framework: pg Args: createsliver IG-CT-1 IG-CT-1-nw.rspec Result Summary: Got Reserved resources RSpec from instageni-northwestern-edu-protogeniv2 INFO:omni: ============================================================ }}} The following is login information for the sliver: {{{ $ readyToLogin.py -a ig-northwestern IG-CT-1 <...> VM-4's geni_status is: ready (am_status:ready) User lnevers logins to VM-4 using: xterm -e ssh -p 30269 -i /home/lnevers/.ssh/id_rsa lnevers@pc1.instageni.northwestern.edu & VM-1's geni_status is: ready (am_status:ready) User lnevers logins to VM-1 using: xterm -e ssh -p 30266 -i /home/lnevers/.ssh/id_rsa lnevers@pc1.instageni.northwestern.edu & VM-3's geni_status is: ready (am_status:ready) User lnevers logins to VM-3 using: xterm -e ssh -p 30268 -i /home/lnevers/.ssh/id_rsa lnevers@pc1.instageni.northwestern.edu & VM-2's geni_status is: ready (am_status:ready) User lnevers logins to VM-2 using: xterm -e ssh -p 30267 -i /home/lnevers/.ssh/id_rsa lnevers@pc1.instageni.northwestern.edu & }}} === Measurements === ''Iperf InstaGENI Northwestern VM-2 to VM-1 (TCP) - TCP window size: 16.0 KB ''' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-67.7 sec 2.38 MBytes 294 Kbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-62.4 sec 2.62 MBytes 353 Kbits/sec [ 4] 0.0-62.6 sec 2.62 MBytes 352 Kbits/sec [ 6] 0.0-62.6 sec 2.62 MBytes 352 Kbits/sec [ 3] 0.0-65.4 sec 2.25 MBytes 288 Kbits/sec [ 7] 0.0-65.5 sec 2.75 MBytes 352 Kbits/sec [SUM] 0.0-65.5 sec 12.9 MBytes 1.65 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-65.6 sec 2.75 MBytes 352 Kbits/sec [ 5] 0.0-65.6 sec 2.75 MBytes 352 Kbits/sec [ 9] 0.0-65.6 sec 2.75 MBytes 352 Kbits/sec [ 8] 0.0-65.6 sec 2.75 MBytes 352 Kbits/sec [ 6] 0.0-65.6 sec 2.75 MBytes 352 Kbits/sec [ 10] 0.0-65.6 sec 2.75 MBytes 352 Kbits/sec [ 11] 0.0-65.6 sec 2.75 MBytes 352 Kbits/sec [ 3] 0.0-65.6 sec 2.75 MBytes 352 Kbits/sec [ 4] 0.0-65.6 sec 2.75 MBytes 352 Kbits/sec [ 7] 0.0-65.6 sec 2.75 MBytes 352 Kbits/sec [SUM] 0.0-65.6 sec 27.5 MBytes 3.52 Mbits/sec }}} '''Iperf InstaGENI Northwestern VM-2 to the VM-1 (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 7.50 MBytes 1.05 Mbits/sec [ 3] Sent 5351 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 7.50 MBytes 1.05 Mbits/sec 0.002 ms 0/ 5351 (0%) }}} '''Ping from InstaGENI GPO VM-2 to the VM-1 ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 58999ms rtt min/avg/max/mdev = 0.025/0.029/0.048/0.007 ms }}} == IG-CT-2 - Access to New Site bare metal and VM resources == Create a slice: {{{ $ omni.py createslice IG-CT-2 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Created slice with Name IG-CT-2, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-2, Expiration 2013-02-17 20:37:17+00:00 INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createslice: Options as run: framework: pg Args: createslice IG-CT-2 Result Summary: Created slice with Name IG-CT-2, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-2, Expiration 2013-02-17 20:37:17+00:00 INFO:omni: ============================================================ }}} Created a sliver with one VM and one Raw PC using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Northwestern/IG-CT-2-nw.rspec IG-CT-2-nw.rspec] {{{ $ omni.py createsliver -a ig-northwestern IG-CT-2 IG-CT-2-nw.rspec INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-2 expires on 2013-02-17 20:37:17 UTC INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file IG-CT-2-nw.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-2 INFO:omni: (PG log url - look here for details on any failures: https://www.instageni.northwestern.edu/spewlogfile.php3?logfile=301ce61598059127df97c491d8c9a7d4) INFO:omni:Got return from CreateSliver for slice IG-CT-2 at http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0: INFO:omni: INFO:omni: INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: ['ig-northwestern'] framework: pg Args: createsliver IG-CT-2 IG-CT-2-nw.rspec Result Summary: Got Reserved resources RSpec from instageni-northwestern-edu-protogeniv2 INFO:omni: ============================================================ }}} Determined login information: {{{ $ readyToLogin.py -a ig-northwestern IG-CT-2 .... <...> PC's geni_status is: ready (am_status:ready) User lnevers logins to PC using: xterm -e ssh -i /home/lnevers/.ssh/id_rsa lnevers@pc5.instageni.northwestern.edu & VM's geni_status is: ready (am_status:ready) User lnevers logins to VM using: xterm -e ssh -p 30266 -i /home/lnevers/.ssh/id_rsa lnevers@pc1.instageni.northwestern.edu & }}} === Measuraments === '''Iperf InstaGENI GPO PC to VM (TCP) - TCP window size: 16.0 KB ''' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 144 MBytes 20.2 Mbits/sec [ 7] 0.0-60.1 sec 145 MBytes 20.2 Mbits/sec [ 4] 0.0-60.1 sec 144 MBytes 20.1 Mbits/sec [ 6] 0.0-60.2 sec 145 MBytes 20.2 Mbits/sec [ 5] 0.0-60.2 sec 144 MBytes 20.1 Mbits/sec [SUM] 0.0-60.2 sec 722 MBytes 101 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 75.2 MBytes 10.5 Mbits/sec [ 3] 0.0-60.1 sec 54.4 MBytes 7.59 Mbits/sec [ 9] 0.0-60.1 sec 74.4 MBytes 10.4 Mbits/sec [ 12] 0.0-60.1 sec 75.8 MBytes 10.6 Mbits/sec [ 6] 0.0-60.2 sec 65.9 MBytes 9.18 Mbits/sec [ 8] 0.0-60.2 sec 78.1 MBytes 10.9 Mbits/sec [ 11] 0.0-60.2 sec 74.6 MBytes 10.4 Mbits/sec [ 7] 0.0-60.3 sec 76.0 MBytes 10.6 Mbits/sec [ 10] 0.0-60.3 sec 76.0 MBytes 10.6 Mbits/sec [ 4] 0.0-60.4 sec 75.4 MBytes 10.5 Mbits/sec [SUM] 0.0-60.4 sec 726 MBytes 101 Mbits/sec }}} '''Iperf InstaGENI GPO PC to the VM (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 7.50 MBytes 1.05 Mbits/sec [ 3] Sent 5351 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 7.50 MBytes 1.05 Mbits/sec 0.001 ms 0/ 5351 (0%) }}} '''Ping from InstaGENI GPO PC to VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 58999ms rtt min/avg/max/mdev = 0.175/0.189/0.238/0.014 ms }}} == IG-CT-3 - Multiple sites experiment == Create a slice: {{{ $ omni.py createslice IG-CT-3 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Created slice with Name IG-CT-3, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3, Expiration 2013-02-17 21:01:10+00:00 INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createslice: Options as run: framework: pg Args: createslice IG-CT-3 Result Summary: Created slice with Name IG-CT-3, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3, Expiration 2013-02-17 21:01:10+00:00 INFO:omni: ============================================================ }}} Create a sliver with one VM at Northwestern and one VM at GPO using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Northwestern/IG-CT-3-nw.rspec IG-CT-3-nw.rspec]. First created the InstaGENI Northwestern sliver: {{{ $ omni.py createsliver IG-CT-3 -a ig-northwestern IG-CT-3-nw.rspec INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3 expires on 2013-02-17 21:01:10 UTC INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Substituting AM nickname ig-northwestern with URL http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file IG-CT-3-nw.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3 INFO:omni: (PG log url - look here for details on any failures: https://www.instageni.northwestern.edu/spewlogfile.php3?logfile=825995ee7bd85788aed1477a9c05a3b1) INFO:omni:Got return from CreateSliver for slice IG-CT-3 at http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0: INFO:omni: INFO:omni: INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: ['ig-northwestern'] framework: pg Args: createsliver IG-CT-3 IG-CT-3-nw.rspec Result Summary: Got Reserved resources RSpec from instageni-northwestern-edu-protogeniv2 INFO:omni: ============================================================ }}} Then creates the InstaGENI Utah sliver: {{{ lnevers@arendia:~/gcf-2.2$ omni.py createsliver IG-CT-3 -a ig-gpo IG-CT-3-nw.rspec INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3 expires on 2013-02-17 21:01:10 UTC INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file IG-CT-3-nw.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-3 INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=5d9aa13c83b0c8f49b7371e9d818fabc) INFO:omni:Got return from CreateSliver for slice IG-CT-3 at http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0: INFO:omni: INFO:omni: INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: ['ig-gpo'] framework: pg Args: createsliver IG-CT-3 IG-CT-3-nw.rspec Result Summary: Got Reserved resources RSpec from instageni-gpolab-bbn-com-protogeniv2 INFO:omni: ============================================================ }}} Determined login information at each Northwestern and GPO aggregate: {{{ $ readyToLogin.py IG-CT-3 -a ig-northwestern .... ================================================================================ LOGIN INFO for AM: http://instageni.northwestern.edu/protogeni/xmlrpc/am/2.0 ================================================================================ VM-1's geni_status is: ready (am_status:ready) User lnevers logins to VM-1 using: xterm -e ssh -p 30266 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.northwestern.edu & $ readyToLogin.py IG-CT-3 -a ig-gpo .... ================================================================================ LOGIN INFO for AM: http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0 ================================================================================ VM-2's geni_status is: ready (am_status:ready) User lnevers logins to VM-2 using: xterm -e ssh -p 30778 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com & }}} === Measuraments === '''Iperf InstaGENI GPO VM-2 to Northwestern VM-1 (TCP) - TCP window size: 16.0 KB ''' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 497 MBytes 69.5 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.1 sec 102 MBytes 14.3 Mbits/sec [ 5] 0.0-60.1 sec 108 MBytes 15.1 Mbits/sec [ 3] 0.0-60.1 sec 128 MBytes 17.8 Mbits/sec [ 4] 0.0-60.1 sec 114 MBytes 15.9 Mbits/sec [ 7] 0.0-60.2 sec 128 MBytes 17.8 Mbits/sec [SUM] 0.0-60.2 sec 579 MBytes 80.8 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.1 sec 55.6 MBytes 7.76 Mbits/sec [ 8] 0.0-60.1 sec 53.0 MBytes 7.39 Mbits/sec [ 4] 0.0-60.2 sec 60.1 MBytes 8.38 Mbits/sec [ 10] 0.0-60.2 sec 57.8 MBytes 8.05 Mbits/sec [ 9] 0.0-60.2 sec 55.0 MBytes 7.66 Mbits/sec [ 5] 0.0-60.2 sec 60.1 MBytes 8.38 Mbits/sec [ 3] 0.0-60.2 sec 51.8 MBytes 7.21 Mbits/sec [ 11] 0.0-60.3 sec 52.4 MBytes 7.29 Mbits/sec [ 12] 0.0-60.3 sec 56.8 MBytes 7.90 Mbits/sec [ 7] 0.0-60.4 sec 60.9 MBytes 8.45 Mbits/sec [SUM] 0.0-60.4 sec 563 MBytes 78.2 Mbits/sec }}} '''Iperf InstaGENI Utah VM-2 to GPO VM-1 (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 7.41 MBytes 1.04 Mbits/sec [ 3] Sent 5351 datagrams read failed: Connection refused [ 3] WARNING: did not receive ack of last datagram after 1 tries. }}} '''Ping from InstaGENI Utah VM-2 to the GPO VM-1 ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59088ms rtt min/avg/max/mdev = 24.241/24.526/25.391/0.325 ms }}} == IG-CT-4 - Multiple sites !OpenFlow experiment and interoperability == This confirmation test creates a sliver at each of the following Aggregates: * Northwestern InstaGENI with two VMs on shared VLAN 1750 using [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Northwestern/IG-CT-4-ig-gpo.rspec IG-CT-4-ig-gpo.rspec] RSpec. * Northwestern FOAM [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Northwestern/IG-CT-4-openflow-ig-nw.rspec IG-CT-4-openflow-ig-nw.rspec] RSpec. * GPO InstaGENI with two VMs on shared VLAN 1750 using [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Northwestern/IG-CT-4-ig-gpo.rspec IG-CT-4-ig-gpo.rspec] RSpec. * GPO InstaGENI FOAM [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Northwestern/IG-CT-4-openflow-ig-gpo.rspec IG-CT-4-openflow-ig-gpo.rspec] RSpec. * GPO Site aggregate [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Northwestern/IG-CT-4-openflow-gpo.rspec IG-CT-4-openflow-gpo.rspec] RSpec. * ProtoGENI Utah with 2 WAPG nodes located at Indiana and using one VM on shared VLAN 1750 [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Utah/IG-CT-4-openflow-indiana-wapg.rspec IG-CT-4-openflow-indiana-wapg.rspec]. * RENCI ExoGENI with 2 VMs on shared VLAN 1750 [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Northwestern/IG-CT-4 IG-CT-4-eg-renci.rspec IG-CT-4 IG-CT-4-eg-renci.rspec] * RENCI ExoGENI FOAM [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Northwestern/IG-CT-4-openflow-eg-renci.rspec IG-CT-4-openflow-eg-renci.rspec] * !OpenFlow datapaths at: - NLR using [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Utah/IG-CT-4-openflow-nlr.rspec IG-CT-4-openflow-nlr.rspec]. - Internet2 using [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Utah/IG-CT-4-openflow-internet2.rspec IG-CT-4-openflow-internet2.rspec]. - UEN using [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Utah/IG-CT-4-openflow-uen.rspec IG-CT-4-openflow-uen.rspec]. - Indian FOAM [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/Utah/IG-CT-4-indiana-wapg-pg-utah.rspec IG-CT-4-indiana-wapg-pg-utah.rspec]. [[BR]] Following is the command sequence that is executed to setup the topology for this confirmation test: {{{ # Create the slice to be used for this confirmation test: $ omni.py createslice IG-CT-4 # Create the FOAM slivers at the Internet and NLR FOAM $ omni.py createsliver -a of-i2 IG-CT-4 IG-CT-4-openflow-internet2.rspec -V1 $ omni.py createsliver -a of-nlr IG-CT-4 IG-CT-4-openflow-nlr.rspec -V1 # Create the slivers at InstaGENI GPO to request nodes on shared VLAN 1750 $ omni.py createsliver -a ig-gpo IG-CT-4 IG-CT-4-ig-gpo.rspec $ omni.py createsliver -a ig-of-gpo IG-CT-4 IG-CT-4-openflow-ig-gpo.rspec # Create the sliver at GPO Site aggregate $ omni.py createsliver -a of-gpo IG-CT-4 IG-CT-4-openflow-gpo.rspec # Create the slivers at InstaGENI Northwestern to request nodes on shared VLAN 1750 $ omni.py createsliver -a ig-northwestern IG-CT-4 IG-CT-4-ig-gpo.rspec $ omni.py createsliver -a ig-of-northwestern IG-CT-4 IG-CT-4-openflow-ig-nw.rspec # Create the sliver at PG Utah to request one WAPG Node at Indiana and one VM at PG Utah on shared VLAN 1750. $ omni.py createsliver -a pg-utah IG-CT-4 IG-CT-4-indiana-wapg-pg-utah.rspec # Create FOAM Sliver at UEN regional for path from Utah to GENI backbone $ omni.py createsliver -a of-uen IG-CT-4 IG-CT-4-openflow-uen.rspec -V1 # Create FOAM Sliver at Indiana FOAM for WAPG node pg58 # Create the slivers at RENCI ExoGENI to request nodes on shared VLAN 1750 # to be added when ExoGENI exits maintenance $ omni.py createsliver -a eg-renci IG-CT-4 IG-CT-4-eg-renci.rspec $ omni.py createsliver -a eg-of-renci IG-CT-4-openflow-eg-renci.rspec }}} Determine login for each of compute resources: {{{ $ readyToLogin.py -a ig-northwestern IG-CT-4 <...> nw-ig2's geni_status is: ready (am_status:ready) User lnevers logins to nw-ig2 using: xterm -e ssh -p 31035 -i /home/lnevers/.ssh/id_rsa lnevers@pc1.instageni.northwestern.edu & nw-ig's geni_status is: ready (am_status:ready) User lnevers logins to nw-ig using: xterm -e ssh -p 31034 -i /home/lnevers/.ssh/id_rsa lnevers@pc1.instageni.northwestern.edu & $ readyToLogin.py -a ig-gpo IG-CT-4 <...> gpo-ig2's geni_status is: ready (am_status:ready) User lnevers logins to gpo-ig2 using: xterm -e ssh -p 31291 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com & gpo-ig's geni_status is: ready (am_status:ready) User lnevers logins to gpo-ig using: xterm -e ssh -p 31290 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com & $ readyToLogin.py -a pg-utah IG-CT-4 utah-pg's geni_status is: ready (am_status:ready) User lnevers logins to utah-pg using: xterm -e ssh -p 30010 -i /home/lnevers/.ssh/id_rsa lnevers@pc403.emulab.net & wapg-indiana-pg58's geni_status is: ready (am_status:ready) User lnevers logins to wapg-indiana-pg58 using: xterm -e ssh -i /home/lnevers/.ssh/id_rsa lnevers@pg58.emulab.net & # to be added when ExoGENI exits maintenance $ readyToLogin.py -a eg-renci IG-CT-4 }}} === Measurements === This section captures measurements collected between the following endpoints: 1. InstaGENI Northwestern VM and InstaGENI GPO VM 2. InstaGENI Northwestern VM and the PG Utah VM 3. InstaGENI Northwestern VM and ExoGENI RENCI VM 4. InstaGENI Northwestern VM and the WAPG node at Indiana 1. The measurements collected for InstaGENI Northwestern VM to the InstaGENI GPO VM: '''Iperf InstaGENI Northwestern VM to the InstaGENI GPO VM (TCP) - TCP window size: 16.0 KB ''' __One Client_ {{{ [ 3] local 10.42.11.53 port 51214 connected with 10.42.11.43 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 6.22 GBytes 890 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-59.9 sec 1.33 GBytes 191 Mbits/sec [ 5] 0.0-59.9 sec 1.43 GBytes 205 Mbits/sec [ 3] 0.0-59.9 sec 1.23 GBytes 176 Mbits/sec [ 6] 0.0-60.0 sec 1.35 GBytes 193 Mbits/sec [ 7] 0.0-60.0 sec 920 MBytes 129 Mbits/sec [SUM] 0.0-60.0 sec 6.24 GBytes 892 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-59.6 sec 560 MBytes 78.9 Mbits/sec [ 4] 0.0-59.7 sec 788 MBytes 111 Mbits/sec [ 7] 0.0-59.7 sec 504 MBytes 70.8 Mbits/sec [ 6] 0.0-59.9 sec 830 MBytes 116 Mbits/sec [ 9] 0.0-60.0 sec 461 MBytes 64.5 Mbits/sec [ 8] 0.0-60.0 sec 573 MBytes 80.1 Mbits/sec [ 12] 0.0-60.0 sec 599 MBytes 83.8 Mbits/sec [ 10] 0.0-60.0 sec 600 MBytes 83.9 Mbits/sec [ 3] 0.0-60.1 sec 1.01 GBytes 145 Mbits/sec [ 11] 0.0-60.1 sec 602 MBytes 83.9 Mbits/sec [SUM] 0.0-60.1 sec 6.40 GBytes 915 Mbits/sec }}} '''Iperf InstaGENI Northwestern VM to the InstaGENI GPO VM (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte ''' {{{ [ 3] local 10.42.11.53 port 52103 connected with 10.42.11.43 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 7.50 MBytes 1.05 Mbits/sec [ 3] Sent 5351 datagrams [ 3] Server Report: [ 3] 0.0-59.6 sec 7.50 MBytes 1.06 Mbits/sec 0.006 ms 33/ 5351 (0.62%) [ 3] 0.0-59.6 sec 33 datagrams received out-of-order }}} '''Ping from InstaGENI Northwestern VM to the InstaGENI GPO VM''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59082ms rtt min/avg/max/mdev = 24.293/37.867/835.825/103.885 ms }}} 2. The measurements collected for InstaGENI Northwestern VM to the PG Utah VM '''Iperf InstaGENI Northwestern VM to the PG Utah VM (TCP) - TCP window size: 16.0 KB ''' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-66.3 sec 265 MBytes 33.5 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-59.9 sec 38.9 MBytes 5.45 Mbits/sec [ 4] 0.0-60.0 sec 47.5 MBytes 6.64 Mbits/sec [ 3] 0.0-60.4 sec 75.9 MBytes 10.5 Mbits/sec [ 6] 0.0-60.5 sec 40.8 MBytes 5.65 Mbits/sec [ 7] 0.0-60.8 sec 69.0 MBytes 9.52 Mbits/sec [SUM] 0.0-60.8 sec 272 MBytes 37.5 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-59.7 sec 28.1 MBytes 3.95 Mbits/sec [ 6] 0.0-59.9 sec 28.2 MBytes 3.96 Mbits/sec [ 5] 0.0-59.9 sec 30.9 MBytes 4.32 Mbits/sec [ 4] 0.0-60.5 sec 45.6 MBytes 6.33 Mbits/sec [ 12] 0.0-60.5 sec 59.8 MBytes 8.28 Mbits/sec [ 10] 0.0-60.5 sec 23.5 MBytes 3.26 Mbits/sec [ 9] 0.0-60.8 sec 28.0 MBytes 3.86 Mbits/sec [ 11] 0.0-61.0 sec 30.9 MBytes 4.25 Mbits/sec [ 7] 0.0-61.1 sec 35.5 MBytes 4.87 Mbits/sec [ 8] 0.0-61.2 sec 34.5 MBytes 4.73 Mbits/sec [SUM] 0.0-61.2 sec 345 MBytes 47.3 Mbits/sec }}} '''Iperf InstaGENI GPO VM to the PG Utah VM (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte ''' {{{ [ 3] local 10.42.11.53 port 48081 connected with 10.42.11.35 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 7.50 MBytes 1.05 Mbits/sec [ 3] Sent 5351 datagrams [ 3] Server Report: [ 3] 0.0-58.6 sec 7.40 MBytes 1.06 Mbits/sec 0.031 ms 70/ 5351 (1.3%) [ 3] 0.0-58.6 sec 66 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the PG Utah VM''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59042ms rtt min/avg/max/mdev = 255.749/358.511/3220.139/471.969 ms, pipe 4 }}} 3. The measurements collected for InstaGENI Northwestern VM to the ExoGENI RENCI VM: '''Iperf InstaGENI Northwestern VM to the ExoGENI RENCI VM (TCP) - TCP window size: 16.0 KB ''' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf InstaGENI Northwestern VM to the ExoGENI RENCI VM (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte ''' {{{ }}} '''Ping from InstaGENI Northwestern VM to the ExoGENI RENCI VM''' {{{ }}} 4. The measurements collected for InstaGENI Utah VM to the WAPG Indiana: '''Iperf InstaGENI Utah VM to the WAPG Indiana (TCP) - TCP window size: 16.0 KB ''' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ '''Iperf InstaGENI GPO VM to the WAPG Indiana (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte ''' {{{ }}} '''Ping from InstaGENI GPO VM to the WAPG Indiana''' {{{ }}} == IG-CT-5 - Experiment Monitoring == Reviewed content of the GMOC Monitoring page for [https://gmoc-db.grnoc.iu.edu/protected-openid/index.pl?method=aggregates aggregates], but there is only a FOAM aggregate, there is no compute resources, see InstaGENI [http://groups.geni.net/instageni/ticket/94 ticket 94]. <<< Compute resource aggregate captures to be added when instaticket:94 is resolved>>> The Northwestern InstaGENI FOAM resources aggregate details: [[Image(Northwestern-FOAMAggregate.jpg)]] Active !OpenFlow Slivers: [[Image(Northwestern-OFSlivers.jpg)]] List of !OpenFlow Resources in use: [[Image(Northwestern-OFResources.jpg)]] Monitoring should show Aggregate measurement for CPU utilization, Disk Utilization, Network Statistics and OF Datapath and Sliver Statistics. At the time of this test these measurements were not available. [[Image(Northwestern-OFMonitoring.jpg)]] == IG-CT-6 - Administrative Tests == Followed instructions at [https://users.emulab.net/trac/protogeni/wiki/RackAdminAccounts Admin Accounts on InstaGeni Racks] page for account request. A local admin account was create and also had to join the ''emulab-ops'' group at https://www.instageni.northwestern.edu/joinproject.php3?target_pid=emulab-ops. Once account was create and membership to emulab-ops was approved proceeded to execute administrative tests. {{{ LNM:~$ ssh luisa@control.instageni.northwestern.edu Welcome to Ubuntu precise (development branch) (GNU/Linux 3.2.0-23-generic x86_64) * Documentation: https://help.ubuntu.com/ System information as of Tue Feb 19 18:13:27 CST 2013 System load: 0.08 Users logged in: 2 Usage of /: 27.5% of 5.85GB IP address for xenbr0: 165.124.51.130 Memory usage: 37% IP address for xenbr1: 10.1.1.254 Swap usage: 1% IP address for xenbr2: 10.2.1.254 Processes: 152 IP address for xenbr3: 10.3.1.254 Graph this data and manage this system at https://landscape.canonical.com/ The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. To run a command as administrator (user "root"), use "sudo ". See "man sudo_root" for details. luisa@nu:~$ sudo whoami root luisa@nu:~$ }}} Also access the node via the PG Boss alias: {{{ LNM:~$ ssh boss.instageni.northwestern.edu Last login: Tue Feb 19 10:55:50 2013 from dhcp89-073-115.bbn.com FreeBSD 9.0-STABLE (XEN) #4: Mon Nov 26 10:02:53 MST 2012 Welcome to FreeBSD! You can press up-arrow or down-arrow to walk through a list of previous commands in tcsh. > sudo whoami root > }}} Further verified access by ssh from ops.instageni.gpolab.bbn.com to boss.instageni.gpolab.bbn.com, which is usually restricted for non-admin users: {{{ LNM:~$ ssh ops.instageni.northwestern.edu Last login: Tue Feb 19 10:58:24 2013 from dhcp89-073-115.bbn.com FreeBSD 9.0-STABLE (XEN) #4: Mon Nov 26 10:02:53 MST 2012 Welcome to FreeBSD! Any user that is a member of the wheel group can use "su -" to simulate a root login. You can add a user to the wheel group by editing /etc/group. -- Konstantinos Konstantinidis > hostname ops.instageni.northwestern.edu > ssh boss Last login: Tue Feb 19 10:58:35 2013 from ops.instageni.northwestern.edu FreeBSD 9.0-STABLE (XEN) #4: Mon Nov 26 10:02:53 MST 2012 Welcome to FreeBSD! In tcsh, you can `set autolist' to have the shell automatically show all the possible matches when doing filename/directory expansion. > hostname boss.instageni.northwestern.edu > }}} From boss node accessed each of the experiment nodes that support VMs: {{{ [lnevers@boss ~]$ for i in pc1 pc2; do ssh $i "echo -n '===> Host: ';hostname;sudo whoami;uname -a;echo"; done ===> Host: vhost1.shared-nodes.emulab-ops.instageni.northwestern.edu root Linux vhost1.shared-nodes.emulab-ops.instageni.northwestern.edu 2.6.32-042stab049.6.emulab.1 #1 SMP Mon May 21 14:36:04 MDT 2012 x86_64 x86_64 x86_64 GNU/Linux ===> Host: vhost2.shared-nodes.emulab-ops.instageni.northwestern.edu root Linux vhost2.shared-nodes.emulab-ops.instageni.northwestern.edu 2.6.32-042stab049.6.emulab.1 #1 SMP Mon May 21 14:36:04 MDT 2012 x86_64 x86_64 x86_64 GNU/Linux [lnevers@boss ~]$ }}} In order to access Dedicated Nodes some experiment must be running on the raw-pc device. At the time of this capture two raw-pc nodes were in use (pc3 and pc5): {{{ [lnevers@boss ~]$ sudo ssh pc3 [root@pc3 ~]# sudo whoami root [root@pc3 ~]# exit logout Connection to pc3.instageni.northwestern.edu closed. [lnevers@boss ~]$ sudo ssh pc5 [root@pc ~]# sudo whoami root [root@pc ~]# }}} Access infrastructure Switches using documented password. First connect to the switch named procurve1 the control network switch: {{{ [lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd XXXXXXXXX [lnevers@boss ~]$ telnet procurve1 Trying 10.1.1.253... Connected to procurve1. Escape character is '^]'. HP J9623A E2620-24 Switch Software revision RA.15.05.0006 Copyright (C) 1991-2011 Hewlett-Packard Development Company, L.P. RESTRICTED RIGHTS LEGEND Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P. 20555 State Highway 249, Houston, TX 77070 We'd like to keep you up to date about: * Software feature updates * New product announcements * Special events Please register your products now at: www.hp.com/networking/register Password: ProCurve Switch 2620# show running-config Running configuration: ; J9623A Configuration Editor; Created on release #RA.15.05.0006 ; Ver #01:01:00 hostname "ProCurve Switch 2620" no cdp run ip default-gateway 10.1.1.254 vlan 1 name "DEFAULT_VLAN" untagged 1-22,25-28 ip address 10.254.254.253 255.255.255.0 no untagged 23-24 ip igmp exit vlan 11 name "control-alternate" untagged 24 ip address 10.2.1.253 255.255.255.0 exit vlan 10 name "control-hardware" ip address 10.1.1.253 255.255.255.0 exit no lldp run no web-management snmp-server community "xxxxxx" unrestricted no snmp-server enable management-vlan 10 no dhcp config-file-update password xxxxxx password xxxxxx }}} Connect to the switch named procurve2 the dataplane network switch via ssh using the documented password: {{{ [lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd xxxxxxx [lnevers@boss ~]$ ssh manager@procurve2 Warning: Permanently added 'procurve2' (RSA) to the list of known hosts. We'd like to keep you up to date about: * Software feature updates * New product announcements * Special events Please register your products now at: www.hp.com/networking/register manager@procurve2's password: HP J8697A Switch E5406zl Software revision K.15.06.5008 Copyright (C) 1991-2012 Hewlett-Packard Development Company, L.P. RESTRICTED RIGHTS LEGEND Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P. 20555 State Highway 249, Houston, TX 77070 Press any key to continue Running configuration: ; J8697A Configuration Editor; Created on release #K.15.06.5008 ; Ver #02:10.0d:1f hostname "HP-E5406zl" module 1 type J9550A interface A1 speed-duplex auto-1000 exit interface A2 speed-duplex auto-1000 exit interface A3 speed-duplex auto-1000 exit interface A4 disable speed-duplex auto-1000 exit interface A5 disable speed-duplex auto-1000 exit interface A6 speed-duplex auto-1000 exit interface A7 disable speed-duplex auto-1000 exit interface A13 speed-duplex auto-1000 exit ip default-gateway 10.3.1.254 vlan 1 name "DEFAULT_VLAN" forbid A3,A6 untagged A4-A5,A7-A12,A14-A19,A21-A23 no untagged A1-A3,A6,A13,A20,A24 no ip address exit vlan 10 name "control-hardware" untagged A20 ip address 10.3.1.253 255.255.255.0 exit vlan 1750 name "_3" tagged A1-A2,A24 no ip address exit vlan 257 name "_4" untagged A3,A6 tagged A1 no ip address exit vlan 258 name "_13" no ip address exit vlan 259 name "_15" untagged A13 no ip address exit no web-management openflow vlan 1750 enable controller "tcp:10.3.1.7:6633" fail-secure on exit exit snmp-server community "xxxxx" unrestricted management-vlan 10 no autorun no dhcp config-file-update no dhcp image-file-update password xxxxxx password xxxxx HP-E5406zl# }}} Access the FOAM VM and gather information for version {{{ LNM:~$ ssh luisa@foam.instageni.northwestern.edu Welcome to Ubuntu 12.04.2 LTS (GNU/Linux 3.2.0-37-generic x86_64) * Documentation: https://help.ubuntu.com/ The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. luisa@foam:~$ sudo foamctl admin:get-version --passwd-file=/etc/foam.passwd { "version": "0.8.2" } }}} Check FOAM configuration for site.admin.email, geni.site-tag, email.from settings: {{{ luisa@foam:~$ foamctl config:get-value --key="site.admin.email" --passwd-file=/etc/foam.passwd { "value": "jim-chen@northwestern.edu" } }}} luisa@foam:~$ foamctl config:get-value --key="geni.site-tag" --passwd-file=/etc/foam.passwd { "value": "foam.instageni.northwestern.edu" } luisa@foam:~$ foamctl config:get-value --key="email.from" --passwd-file=/etc/foam.passwd { "value": "jim-chen@northwestern.edu" } # check if FOAM auto-approve is on. Value 2 = auto-approve is on. luisa@foam:~$ foamctl config:get-value --key="geni.approval.approve-on-creation" --passwd-file=/etc/foam.passwd { "value": 2 } }}} Show FOAM slivers and details for one sliver: {{{ luisa@foam:~$ foamctl geni:list-slivers --passwd-file=/etc/foam.passwd { "slivers": [ { "status": "Approved", "sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tupty1755:8d79cc0f-5532-4c78-b2b7-4b7739c72873", "creation": "2013-02-15 03:00:26.934527+00:00", "pend_reason": null, "expiration": "2013-04-15 00:00:00+00:00", "deleted": "False", "user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+tupty", "slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+tupty1755", "enabled": true, "email": "tupty@pgeni.gpolab.bbn.com", "flowvisor_slice": "8d79cc0f-5532-4c78-b2b7-4b7739c72873", "desc": "tupty1755 OpenFlow resources at Northwestern InstaGENI.", "ref": null, "id": 2, "uuid": "8d79cc0f-5532-4c78-b2b7-4b7739c72873" }, { "status": "Approved", "sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-4:5c956f94-5e05-40b5-948f-34d0149d9182", "creation": "2013-02-18 14:47:20.419434+00:00", "pend_reason": null, "expiration": "2013-02-22 00:00:00+00:00", "deleted": "False", "user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+lnevers", "slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-4", "enabled": true, "email": "lnevers@pgeni.gpolab.bbn.com", "flowvisor_slice": "5c956f94-5e05-40b5-948f-34d0149d9182", "desc": "New Site Confirmation Test IG-CT-4 ", "ref": null, "id": 3, "uuid": "5c956f94-5e05-40b5-948f-34d0149d9182" } ] } luisa@foam:~$ luisa@foam:~$ foamctl geni:show-sliver --urn "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-4:5c956f94-5e05-40b5-948f-34d0149d9182" --passwd-file=/etc/foam.passwd { "sliver": { "flowspace rules": 2, "status": "Approved", "creation": "2013-02-18 14:47:20.419434+00:00", "uuid": "5c956f94-5e05-40b5-948f-34d0149d9182", "deleted": "False", "user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+lnevers", "slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-4", "enabled": true, "pend_reason": null, "email": "lnevers@pgeni.gpolab.bbn.com", "controllers": [ { "url": "tcp:mallorea.gpolab.bbn.com:33020", "type": "primary" } ], "expiration": "2013-02-22 00:00:00+00:00", "desc": "New Site Confirmation Test IG-CT-4 ", "sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-CT-4:5c956f94-5e05-40b5-948f-34d0149d9182", "ref": null, "id": 3, "flowvisor_slice": "5c956f94-5e05-40b5-948f-34d0149d9182" } } luisa@foam:~$ }}} Access the FlowVisor VM and gather version information: {{{ LNM:~$ ssh luisa@flowvisor.instageni.northwestern.edu Welcome to Ubuntu 12.04.2 LTS (GNU/Linux 3.2.0-37-generic x86_64) * Documentation: https://help.ubuntu.com/ Last login: Tue Feb 19 19:10:33 2013 from 128.89.253.56 luisa@flowvisor:~$ sudo whoami root luisa@flowvisor:~$ }}} Check the !FlowVisor version, list of devices, get details for a device, list of active slices, and details for one of the slices: {{{ luisa@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd ping hello Got reply: PONG(fvadmin): FV version=flowvisor-0.8.14::hello luisa@flowvisor:~$ # Devices luisa@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listDevices Device 0: 06:d6:6c:3b:e5:68:00:00 luisa@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd getDeviceInfo 06:d6:6c:3b:e5:68:00:00 nPorts=4 portList=24,65534,1,2 dpid=06:d6:6c:3b:e5:68:00:00 remote=/10.3.1.7:6633-->/10.3.1.253:64367 portNames=A24(24),local(65534),A1(1),A2(2) luisa@flowvisor:~$ #Slices luisa@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listSlices Slice 0: fvadmin Slice 1: 8d79cc0f-5532-4c78-b2b7-4b7739c72873 Slice 2: 5c956f94-5e05-40b5-948f-34d0149d9182 luisa@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd getSliceInfo 5c956f94-5e05-40b5-948f-34d0149d9182 Got reply: drop_policy=exact connection_1=06:d6:6c:3b:e5:68:00:00-->/165.124.51.135:48385-->mallorea.gpolab.bbn.com/192.1.249.185:33020 contact_email=lnevers@pgeni.gpolab.bbn.com controller_hostname=mallorea.gpolab.bbn.com controller_port=33020 creator=fvadmin }}} Check the FlowVisor setting: {{{ luisa@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd dumpConfig /tmp/flowvisor-config luisa@flowvisor:~$ more /tmp/flowvisor-config { "flowvisor": [ { "api_webserver_port": 8080, "api_jetty_webserver_port": -1, "checkpointing": false, "listen_port": 6633, "track_flows": false, "stats_desc_hack": false, "run_topology_server": false, "logging": "NOTE", "log_ident": "flowvisor", "log_facility": "LOG_LOCAL7", "version": "flowvisor-0.9", "host": "localhost", "default_flood_perm": "fvadmin", "config_name": "default" } ], "Slice": [ { "config_name": "default", "flowmap_type": "federated", "name": "fvadmin", "creator": "fvadmin", "passwd_crypt": "49372919dadf40765aeda78215e811c3", "passwd_salt": "-1301858", "controller_hostname": "none", "controller_port": 0, "contact_email": "fvadmin@localhost", "drop_policy": "exact", "lldp_spam": true }, { "config_name": "default", "flowmap_type": "federated", "name": "8d79cc0f-5532-4c78-b2b7-4b7739c72873", "creator": "fvadmin", "passwd_crypt": "75199e2a22920f413c79a5bf6f0af426", "passwd_salt": "-1881229036", "controller_hostname": "hafmet.gpolab.bbn.com", "controller_port": 33012, "contact_email": "tupty@pgeni.gpolab.bbn.com", "drop_policy": "exact", "lldp_spam": true }, { "config_name": "default", "flowmap_type": "federated", "name": "5c956f94-5e05-40b5-948f-34d0149d9182", "creator": "fvadmin", "passwd_crypt": "xxxx", "passwd_salt": "xxxx", "controller_hostname": "mallorea.gpolab.bbn.com", "controller_port": 33020, "contact_email": "lnevers@pgeni.gpolab.bbn.com", "drop_policy": "exact", "lldp_spam": true } ], "FlowSpaceRule": [ { "dpid": "6d66c3be5680000", "priority": 100, "in_port": 0, "dl_type": 2048, "nw_src": 168900352, "nw_dst": 168900352, "wildcards": 3279087, "slice_action": [ { "8d79cc0f-5532-4c78-b2b7-4b7739c72873": 4 } ] }, { "dpid": "6d66c3be5680000", "priority": 100, "in_port": 0, "dl_type": 2054, "nw_src": 168900352, "nw_dst": 168900352, "wildcards": 3279087, "slice_action": [ { "8d79cc0f-5532-4c78-b2b7-4b7739c72873": 4 } ] }, { "dpid": "6d66c3be5680000", "priority": 2000, "in_port": 0, "dl_type": 2048, "nw_src": 170527488, "nw_dst": 170527488, "wildcards": 3279087, "slice_action": [ { "5c956f94-5e05-40b5-948f-34d0149d9182": 4 } ] }, { "dpid": "6d66c3be5680000", "priority": 2000, "in_port": 0, "dl_type": 2054, "nw_src": 170527488, "nw_dst": 170527488, "wildcards": 3279087, "slice_action": [ { "5c956f94-5e05-40b5-948f-34d0149d9182": 4 } ] } ] } }}} Verify alerts for the compute resource Aggregate Manager are being reported to the [http://monitor.gpolab.bbn.com/nagios/cgi-bin/status.cgi GPO Tango GENI Nagios monitoring] and that all alerts have status OK. [[Image(Northwestern-nagios.jpg)]] Verify alerts for the FOAM Aggregate Manager are being reported to the [http://monitor.gpolab.bbn.com/nagios/cgi-bin/status.cgi GPO Tango GENI Nagios monitoring] and that all alerts have status OK. [[Image(Northwestern-OF-nagios.jpg)]] ---- {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}