Changes between Version 36 and Version 37 of GENIRacksHome/InstageniRacks/AggregateSurvey

Timestamp:

04/30/12 14:53:03 (12 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIRacksHome/InstageniRacks/AggregateSurvey

@@ -9 +9 @@
 = InstaGENI Status on 04/27/2012 =
 
-Attempt to set up a two node of type raw-pc with share link fails with a mapper error.  This was due to the RSpec no specifying a bandwidth.  Once the "capacity="1000000" was added to the link, the problem was resolved.  
+Attempt to set up a two node of type raw-pc with share link fails with a mapper error.  This was due to the RSpec not specifying a bandwidth.  Once the "capacity="1000000" was added to the link, the problem was resolved and was able to reserve and use the nodes with the specified link.  Adding bandwidth to each interface did not help.
 
 Also, the mapper failure differed between InstaGENI and PG Utah, which reported a "No stitching path" error rather the failure below.  Following is a capture of the createsliver mapper failure:
@@ -116 +116 @@
 }}}
 
-If interested, the Omni commands and RSpec are founs [http://groups.geni.net/geni/attachment/wiki/GENIRacksHome/InstageniRacks/AggregateSurvey/mapper-error.txt here]
+If interested, the Omni commands and RSpec are founds [http://groups.geni.net/geni/attachment/wiki/GENIRacksHome/InstageniRacks/AggregateSurvey/mapper-error.txt here]
 
 = InstaGENI Status on 04/27/2012 =