= IG-MON-4: Infrastructure Device Performance Test = This page captures status for the test case IG-MON-4, which verifies that the rack head node performs well enough to run all the services it needs to run while !OpenFlow and non-OpenFlow experiments are running. For overall status see the [wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus InstaGENI Acceptance Test Status] page. ''Last update: 2013/01/29'' = Test Status = This section captures the status for each step in the acceptance test plan. ||'''Step'''||'''State'''|| ''' Ticket ''' || '''Notes''' || || Step 1 || || || || || Step 2 || || || || || Step 3 || || || || [[BR]] || '''State Legend''' || '''Description''' || || [[Color(green,Pass)]] || Test completed and met all criteria || || [[Color(#98FB98,Pass: most criteria)]] || Test completed and met most criteria. Exceptions documented || || [[Color(red,Fail)]] || Test completed and failed to meet criteria. || || [[Color(yellow,Complete)]] || Test completed but will require re-execution due to expected changes || || [[Color(orange,Blocked)]] || Blocked by ticketed issue(s). || || [[Color(#63B8FF,In Progress)]] || Currently under test. || [[BR]] = Test Plan Steps = This test cases sets up several experiments to generate resource usage for both compute and network resources in an InstaGENI Rack. The rack used is the GPO rack and the following experiments are set up before head node device performance is reviewed: - IG-MON-4-exp1: IG GPO non-!OpenFlow experiment with 10 VM nodes, all nodes exchanging traffic. - IG-MON-4-exp2: IG GPO non-!OpenFlow experiment with 1 VM and one dedicated raw-pc, both exchanging traffic. - IG-MON-4-exp3: IG GPO !OpenFlow experiment with 2 nodes in rack exchanging traffic with 2 site GPO !OpenFlow campus resources. - IG-MON-4-exp4: IG GPO !OpenFlow experiment with 2 nodes exchanging traffic with 2 remote IG Utah !OpenFlow nodes. The setup of the experiments above is not captured in this test case, but the RSpec are available [insert_link_here]. Also traffic levels and types will be captured when this test is run. While the 4 experiments involving !OpenFlow and compute slivers are running, execute the steps below. == 1. View !OpenFlow control monitoring at GMOC and verify that no monitoring data is missing == == 2. View VLAN 1750 data plane monitoring == Verify the VLAN 1750 data plane monitoring which pings the rack's interface on VLAN 1750, and verify that packets are not being dropped == 3. Verify CPU idle percentage on the server host and the FOAM VM are both nonzero ==