Changes between Version 2 and Version 3 of GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-MON-4


Ignore:
Timestamp:
01/29/13 13:53:46 (7 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-MON-4

    v2 v3  
    1414|| Step 3   ||           ||                 ||               ||
    1515
    16 [BR]]
     16[[BR]]
    1717|| '''State Legend'''                     || '''Description'''                                                    ||
    1818|| [[Color(green,Pass)]]                  || Test completed and met all criteria                                  ||
     
    2929This test cases sets up several experiments to generate resource usage for both compute and network resources in an InstaGENI Rack.  The rack used is the GPO rack and the following experiments are set up before head node device performance is reviewed:
    3030
    31  - IG-MON-4-exp1: IG GPO non-!OpenFlow experiment with 10 VM nodes, all nodes exchanging TCP traffic.
    32  - IG-MON-4-exp2: IG GPO non-!OpenFlow experimetn with 1 VM and one dedicated raw-pc, both exchanging traffic with iperf
     31 - IG-MON-4-exp1: IG GPO non-!OpenFlow experiment with 10 VM nodes, all nodes exchanging traffic.
     32 - IG-MON-4-exp2: IG GPO non-!OpenFlow experimetn with 1 VM and one dedicated raw-pc, both exchanging traffic.
    3333 - IG-MON-4-exp3: IG GPO !OpenFlow experiment with 2 nodes in rack exchanging traffic with 2 site GPO !OpenFlow campus resources.
    3434 - IG-MON-4-exp4: IG GPO !OpenFlow experiment with 2 nodes exchanging traffic with 2 remote IG Utah !OpenFlow nodes.
    3535
    36 The setup of the experiments above is not captured in this test case, but the Rspec are available [here]. While the 4 experiments involving FOAM-controlled OpenFlow slivers and compute slivers are running, execute the steps below.
     36The setup of the experiments above is not captured in this test case, but the Rspec are available [here].  Also traffic levels and types will be captured when this test is run.
     37
     38
     39While the 4 experiments involving FOAM-controlled OpenFlow slivers and compute slivers are running, execute the steps below.
    3740 
    3841== 1. View OpenFlow control monitoring at GMOC and verify that no monitoring data is missing ==