[[PageOutline]]
= IG-MON-3: GENI Active Experiment Inspection Test =
This page captures status for the test case IG-MON-3, which verifies the ability to start, stop, and terminate experiments by experimenters and administrators. For overall status see the [wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus InstaGENI Acceptance Test Status] page.
''Last update: 2013-03-06''
== Test Status ==
|| '''Step''' || '''State''' || '''Tickets''' ||'''Notes''' ||
|| 1 || [[Color(green,Pass)]]|| || ||
|| 2 || [[Color(green,Pass)]]|| || ||
|| 3 || [[Color(green,Pass)]]|| || ||
|| 4 || [[Color(green,Pass)]]|| || ||
|| 5 || [[Color(green,Pass)]]|| || ||
|| 6 || [[Color(green,Pass)]]|| || ||
|| 7 || [[Color(green,Pass)]]|| || ||
|| 8 || [[Color(green,Pass)]]|| || ||
[[BR]]
|| '''State Legend''' || '''Description''' ||
|| [[Color(green,Pass)]] || Test completed and met all criteria ||
|| [[Color(#98FB98,Pass: most criteria)]] || Test completed and met most criteria. Exceptions documented ||
|| [[Color(red,Fail)]] || Test completed and failed to meet criteria. ||
|| [[Color(yellow,Complete)]] || Test completed but will require re-execution due to expected changes ||
|| [[Color(orange,Blocked)]] || Blocked by ticketed issue(s). ||
|| [[Color(#63B8FF,In Progress)]] || Currently under test. ||
[[BR]]
= Test Plan Steps =
In this test case, three experiments are started and various administrative features are used to determine experiment state and resources.
== Step 1. Start a VM experiment and leave it running ==
As experimenter create a 2 VMs experiment in the GPO InstaGENI rack. RSpec used:
{{{
}}}
Create a slice and sliver:
{{{
$ omni.py createslice EG-MON-3
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Created slice with Name EG-MON-3, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-MON-3, Expiration 2013-03-07 15:09:24+00:00
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createslice:
Options as run:
framework: pg
Args: createslice EG-MON-3
Result Summary: Created slice with Name EG-MON-3, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-MON-3, Expiration 2013-03-07 15:09:24+00:00
INFO:omni: ============================================================
$ omni.py createsliver -a ig-gpo EG-MON-3 ./instageni-2vm-at-gpo.rspec
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-MON-3 expires on 2013-03-07 15:09:24 UTC
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file ./instageni-2vm-at-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-MON-3
INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=388177e82b203e84aa3694dda7bf441d)
INFO:omni:Got return from CreateSliver for slice EG-MON-3 at https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0:
INFO:omni:
INFO:omni:
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
Options as run:
aggregate: ['ig-gpo']
framework: pg
Args: createsliver EG-MON-3 ./instageni-2vm-at-gpo.rspec
Result Summary: Got Reserved resources RSpec from instageni-gpolab-bbn-com-protogeniv2
INFO:omni: ============================================================
}}}
Determine login information for the VM resources assigned and that the VMs are "ready" for use:
{{{
$ readyToLogin.py -a ig-gpo EG-MON-3
<...>
VM-2's geni_status is: ready (am_status:ready)
User lnevers logins to VM-2 using:
xterm -e ssh -p 31291 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com &
VM-1's geni_status is: ready (am_status:ready)
User lnevers logins to VM-1 using:
xterm -e ssh -p 31290 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com &
}}}
Login to VM-1, verify hostname, address assignment and initial ARP table entries:
{{{
$ ssh -p 31290 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com
[lnevers@VM-1 ~]$ /sbin/ifconfig mv1.12
mv1.12 Link encap:Ethernet HWaddr 02:10:46:39:F3:47
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::10:46ff:fe39:f347/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:6 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:552 (552.0 b) TX bytes:0 (0.0 b)
[lnevers@VM-1 ~]$ /sbin/arp -a
pc2.instageni.gpolab.bbn.com (192.1.242.141) at 10:60:4b:9b:82:14 [ether] on eth999
boss.instageni.gpolab.bbn.com (192.1.242.132) at 02:9e:26:f1:52:99 [ether] on eth999
}}}
Login to VM-2, verify hostname, address assignment, MAC address for data plane interface, and initial ARP table entries:
{{{
$ ssh -p 31291 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com
[lnevers@VM-2 ~]$ /sbin/ifconfig mv6.13
mv6.13 Link encap:Ethernet HWaddr 02:00:63:C7:43:61
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::63ff:fec7:4361/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:6 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[lnevers@VM-2 ~]$ /sbin/arp -a
pc2.instageni.gpolab.bbn.com (192.1.242.141) at 10:60:4b:9b:82:14 [ether] on eth999
boss.instageni.gpolab.bbn.com (192.1.242.132) at 02:9e:26:f1:52:99 [ether] on eth999
}}}
Install iperf on both VMs and exchange TCP traffic from VM-1 client to VM-2 server over the data plane interface and look at ARP table entries:
{{{
[lnevers@VM-1 ~]$ /usr/bin/iperf -c 192.168.1.2 -t 60
------------------------------------------------------------
Client connecting to 192.168.1.2, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.1.1 port 55185 connected with 192.168.1.2 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 687 MBytes 96.0 Mbits/sec
[lnevers@VM-1 ~]$ /sbin/arp -a
pc2.instageni.gpolab.bbn.com (192.1.242.141) at 10:60:4b:9b:82:14 [ether] on eth999
boss.instageni.gpolab.bbn.com (192.1.242.132) at 02:9e:26:f1:52:99 [ether] on eth999
VM-2-lan0 (192.168.1.2) at 02:00:63:c7:43:61 [ether] on mv1.12
}}}
Show ARP entries on VM2 (iperf server):
{{{
[lnevers@VM-2 ~]$ /sbin/arp -a
pc2.instageni.gpolab.bbn.com (192.1.242.141) at 10:60:4b:9b:82:14 [ether] on eth999
boss.instageni.gpolab.bbn.com (192.1.242.132) at 02:9e:26:f1:52:99 [ether] on eth999
VM-1-lan0 (192.168.1.1) at 02:10:46:39:f3:47 [ether] on mv6.13
}}}
Leave experiment running.
== Step 2. Start a bare metal node experiment and leave it running ==
As experimenter create a 2 Raw PCs experiment in the GPO InstaGENI rack. RSpec used:
{{{
}}}
Create a slice and sliver:
{{{
$ omni.py createslice IG-MON-3
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Created slice with Name IG-MON-3, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3, Expiration 2013-03-07 15:47:53+00:00
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createslice:
Options as run:
framework: pg
Args: createslice IG-MON-3
Result Summary: Created slice with Name IG-MON-3, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3, Expiration 2013-03-07 15:47:53+00:00
INFO:omni: ============================================================
$ omni.py createsliver -a ig-gpo IG-MON-3 ./instageni-2rawpc-at-gpo.rspec
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3 expires on 2013-03-07 15:47:53 UTC
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file ./instageni-2rawpc-at-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3
INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=deb52735b826a50320d5274e8e4c6c8e)
INFO:omni:Got return from CreateSliver for slice IG-MON-3 at https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0:
INFO:omni:
INFO:omni:
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
Options as run:
aggregate: ['ig-gpo']
framework: pg
Args: createsliver IG-MON-3 ./instageni-2rawpc-at-gpo.rspec
Result Summary: Got Reserved resources RSpec from instageni-gpolab-bbn-com-protogeniv2
INFO:omni: ============================================================
}}}
Determine login information for the sliver resources:
{{{
$ readyToLogin.py -a ig-gpo IG-MON-3
<...>
PC-1's geni_status is: ready (am_status:ready)
User lnevers logins to PC-1 using:
xterm -e ssh -i /home/lnevers/.ssh/id_rsa lnevers@pc5.instageni.gpolab.bbn.com &
PC-2's geni_status is: ready (am_status:ready)
User lnevers logins to PC-2 using:
xterm -e ssh -i /home/lnevers/.ssh/id_rsa lnevers@pc4.instageni.gpolab.bbn.com &
}}}
Login to PC-1, verify hostname, address assignment and initial ARP table entries:
{{{
$ ssh -i /home/lnevers/.ssh/id_rsa lnevers@pc5.instageni.gpolab.bbn.com
[lnevers@pc-1 ~]$ /sbin/ifconfig eth1
eth1 Link encap:Ethernet HWaddr 10:60:4B:9C:47:6A
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::1260:4bff:fe9c:476a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:492 (492.0 b)
Interrupt:37 Memory:f2000000-f2012800
[lnevers@pc-1 ~]$ /sbin/arp -a
ops.instageni.gpolab.bbn.com (192.1.242.133) at 02:07:2d:51:f4:6a [ether] on eth0
boss.instageni.gpolab.bbn.com (192.1.242.132) at 02:9e:26:f1:52:99 [ether] on eth0
? (192.1.242.129) at cc:ef:48:7a:7a:a9 [ether] on eth0
}}}
Login to PC-2, verify hostname, address assignment and initial ARP table entries:
{{{
$ ssh -i /home/lnevers/.ssh/id_rsa lnevers@pc4.instageni.gpolab.bbn.com
[lnevers@pc-2 ~]$ /sbin/ifconfig eth1
eth1 Link encap:Ethernet HWaddr 10:60:4B:96:00:D6
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::1260:4bff:fe96:d6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:492 (492.0 b)
Interrupt:37 Memory:f2000000-f2012800
[lnevers@pc-2 ~]$ /sbin/arp -a
ops.instageni.gpolab.bbn.com (192.1.242.133) at 02:07:2d:51:f4:6a [ether] on eth0
boss.instageni.gpolab.bbn.com (192.1.242.132) at 02:9e:26:f1:52:99 [ether] on eth0
? (192.1.242.129) at cc:ef:48:7a:7a:a9 [ether] on eth0
}}}
Install iperf on both PCs and exchange TCP traffic from PC-1 client to PC-2 server over the data plane interface and look at ARP table entries:
{{{
[lnevers@pc-1 ~]$ /usr/bin/iperf -c 192.168.1.2 -i 1
------------------------------------------------------------
Client connecting to 192.168.1.2, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.1.1 port 58436 connected with 192.168.1.2 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 1.0 sec 113 MBytes 947 Mbits/sec
[ 3] 1.0- 2.0 sec 112 MBytes 940 Mbits/sec
[ 3] 2.0- 3.0 sec 112 MBytes 943 Mbits/sec
[ 3] 3.0- 4.0 sec 112 MBytes 942 Mbits/sec
[ 3] 4.0- 5.0 sec 112 MBytes 940 Mbits/sec
}}}
Leave sliver running.
== Step 3. Start an !OpenFlow experiment and leave it running ==
As experimenter create a 2 VMs !OpenFlow experiment in the GPO InstaGENI rack. RSpec used:
{{{
}}}
Create a sliver and sliver for the 2 VMs on shared !OpenFlow VLAN 1750 in the GPO InstaGENI rack:
{{{
$ omni.py createslice IG-MON-3-OF
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Created slice with Name IG-MON-3-OF, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF, Expiration 2013-03-07 16:26:04+00:00
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createslice:
Options as run:
framework: pg
Args: createslice IG-MON-3-OF
Result Summary: Created slice with Name IG-MON-3-OF, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF, Expiration 2013-03-07 16:26:04+00:00
INFO:omni: ============================================================
$ omni.py createsliver -a ig-gpo IG-MON-3-OF ./instageni-2vm-vlan1750-at-gpo.rspec
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF expires on 2013-03-07 16:26:04 UTC
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file ./instageni-2vm-vlan1750-at-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF
INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=8af1230117ca9b383b6510da21d7abc7)
INFO:omni:Got return from CreateSliver for slice IG-MON-3-OF at https://instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0:
INFO:omni:
INFO:omni:
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
Options as run:
aggregate: ['ig-gpo']
framework: pg
Args: createsliver IG-MON-3-OF ./instageni-2vm-vlan1750-at-gpo.rspec
Result Summary: Got Reserved resources RSpec from instageni-gpolab-bbn-com-protogeniv2
INFO:omni: ============================================================
}}}
A FOAM sliver is needed to allow the traffic exchange. Using this FOAM RSpec:
{{{
}}}
Create a sliver at the GPO InstaGENI rack FOAM to allow the traffic exchange:
{{{
$ omni.py createsliver -a ig-of-gpo IG-MON-3-OF ./instageni-openflow-at-gpo.rspec
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-of-gpo with URL https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN
WARNING:omni:You asked to use AM API 2, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v1.
WARNING:omni:Switching to AM API v1. Next time call Omni with '-V1'.
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF expires on 2013-03-07 16:26:04 UTC
INFO:omni:Substituting AM nickname ig-of-gpo with URL https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-of-gpo with URL https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file ./instageni-openflow-at-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF
INFO:omni:Got return from CreateSliver for slice IG-MON-3-OF at https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1:
INFO:omni:
INFO:omni:
INFO:omni:
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
Options as run:
aggregate: ['ig-of-gpo']
api_version: 1
framework: pg
Args: createsliver IG-MON-3-OF ./instageni-openflow-at-gpo.rspec
Result Summary: Your AMs do not all speak requested API v2. At the URLs you are contacting, all your AMs speak AM API v1. Switching to AM API v1. Next time call Omni with '-V1'.
Got Reserved resources RSpec from foam-instageni-gpolab-bbn-com
INFO:omni: ============================================================
}}}
This sliver is auto approved. State can be confirmed with omni command:
{{{
$ omni.py sliverstatus -a ig-of-gpo IG-MON-3-OF -V1
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-of-gpo with URL https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF expires on 2013-03-07 16:26:04 UTC
INFO:omni:Substituting AM nickname ig-of-gpo with URL https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Status of Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF:
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF at AM https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1 has overall SliverStatus: ready
INFO:omni:Sliver status for Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF at AM URL https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1
INFO:omni:{
"geni_status": "ready",
"geni_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF:8070b745-84c7-47eb-8e04-63a764997f3a",
"foam_pend_reason": null,
"foam_expires": "2013-03-07 16:26:04+00:00",
"geni_resources": [
{
"geni_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF:8070b745-84c7-47eb-8e04-63a764997f3a",
"geni_error": "",
"geni_status": "ready"
}
],
"foam_status": "Approved"
}
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed sliverstatus:
Options as run:
aggregate: ['ig-of-gpo']
api_version: 1
framework: pg
Args: sliverstatus IG-MON-3-OF
Result Summary: Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF expires on 2013-03-07 16:26:04 UTC
Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF at AM https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1 has overall SliverStatus: ready.
Returned status of slivers on 1 of 1 possible aggregates.
INFO:omni: ============================================================
}}}
Determine login for assigned nodes:
{{{
$ readyToLogin.py -a ig-gpo IG-MON-3-OF
<...>
gpo-ig's geni_status is: ready (am_status:ready)
User lnevers logins to gpo-ig using:
xterm -e ssh -p 32058 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com &
gpo-ig2's geni_status is: ready (am_status:ready)
User lnevers logins to gpo-ig2 using:
xterm -e ssh -p 32059 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com &
}}}
Login to VM named 'gpo-ig' and send traffic to remote:
{{{
$ ssh -p 32058 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com
[lnevers@ig-gpo ~]$ ping 10.42.18.42 -c 5
PING 10.42.18.42 (10.42.18.42) 56(84) bytes of data.
64 bytes from 10.42.18.42: icmp_req=1 ttl=64 time=6.73 ms
64 bytes from 10.42.18.42: icmp_req=2 ttl=64 time=0.077 ms
64 bytes from 10.42.18.42: icmp_req=3 ttl=64 time=0.075 ms
64 bytes from 10.42.18.42: icmp_req=4 ttl=64 time=0.075 ms
64 bytes from 10.42.18.42: icmp_req=5 ttl=64 time=0.075 ms
--- 10.42.18.42 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.075/1.407/6.735/2.664 ms
}}}
Login to VM named 'gpo-ig2' and send traffic to remote:
{{{
$ ssh -p 32059 -i /home/lnevers/.ssh/id_rsa lnevers@pc2.instageni.gpolab.bbn.com
[lnevers@ig-gpo2 ~]$ ping 10.42.18.43 -c 5
PING 10.42.18.43 (10.42.18.43) 56(84) bytes of data.
64 bytes from 10.42.18.43: icmp_req=1 ttl=64 time=6.33 ms
64 bytes from 10.42.18.43: icmp_req=2 ttl=64 time=0.075 ms
64 bytes from 10.42.18.43: icmp_req=3 ttl=64 time=0.074 ms
64 bytes from 10.42.18.43: icmp_req=4 ttl=64 time=0.076 ms
64 bytes from 10.42.18.43: icmp_req=5 ttl=64 time=0.074 ms
--- 10.42.18.43 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4000ms
rtt min/avg/max/mdev = 0.074/1.327/6.337/2.505 ms
[lnevers@ig-gpo2 ~]$
}}}
Leave experiment running
== Step 4. Administrator review of running experiments ==
As administrator determine experiments status, resource assignment, and configuration for the 3 experiments that are running from previous steps:
- EG-MON-3 - a 2 VM experiment
- IG-MON-3 - a 2 raw pc experiment
- IG-MON-3-OF - a 2 VM !OpenFlow experiment
Determine list of active experiments, by selecting "Experimentation" pulldown in "red dot" mode, and choosing "Experiment list", which maps to the
URL https://boss.instageni.gpolab.bbn.com/showexp_list.php3. A capture of the active experiment page shows:
[[Image(IG-MON-3-experiments.jpg)]]
[[BR]]
Each of the 3 experiment created for this test case (EG-MON-3, IG-MON-3, and IG-MON-3-OF) are present in the list.
[[BR]]
In the Active Experiment table, select the experiment EG-MON-3 (2 VM experiment) and this shows show all know details for the experiment:
[[BR]]
[[Image(IG-MON-3-2vm.jpg)]]
[[BR]]
In the Active Experiment table, select the experiment IG-MON-3 (2 raw pc experiment) and this shows show all know details for the experiment:
[[BR]]
[[Image(IG-MON-3-2pc.jpg)]]
[[BR]]
In the Active Experiment table, select the experiment IG-MON-3-OF (2 VM !OpenFlow experiment)and this shows show all know details for the experiment:
[[BR]]
[[Image(IG-MON-3-2vm-of.jpg)]]
[[BR]]
For each of the above experiment clicking on the topology diagram on the left hand side panel will result in a details page that includes specific configuration and allocation for the experiment.
Clicking on the topology diagram for the experiment IG-MON-3 (2 raw pc experiment), this shows node mapping, IP Port allocation, and other useful information:
[[Image(IG-MON-3-2pc-detail.jpg)]]
For the experiment IG-MON-3-OF (2 VM !OpenFlow experiment), click the topology diagram and the experiment topology along with the experiment details for Virtual Nodes, Physical Nodes Mapping, Port Allocation, Virtual Links, Physical Links, Links Mappings, and VLAN settings are shown:
[[Image(IG-MON-3-2vm-of-detail.jpg)]]
[[BR]]
Compared the MAC addresses show on this page with the ones collected in earlier steps from logging into the experiment nodes and found them to be the same.
As administrator, log into the OpenVZ host pc2 and determine list of VMs running:
{{{
[lnevers@boss ~]$ ssh pc2
Last login: Wed Feb 6 15:10:36 2013 from boss.instageni.gpolab.bbn.com
[lnevers@vhost2 ~]$
[lnevers@vhost2 ~]$ sudo vzlist -a
CTID NPROC STATUS IP_ADDR HOSTNAME
1 16 running - VM-1.EG-MON-3.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com
2 16 running - VM-1.ln-pgeni-cred.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com
3 37 running - gpo-ig.IG-CT-4.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com
4 25 running - gpo-ig.SHORT-IG-CT-4.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com
5 16 running - gpo-ig2.SHORT-IG-CT-4.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com
6 22 running - VM-2.EG-MON-3.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com
7 22 running - gpo-ig2.IG-CT-4.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com
8 23 running - server.portal01.panther.instageni.gpolab.bbn.com
9 16 running - gpo-ig.IG-MON-3-OF.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com
10 22 running - gpo-ig2.IG-MON-3-OF.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com
[lnevers@vhost2 ~]$
}}}
While logged in to the OpenVZ host pc2, determine which container is running a given PID:
{{{
UID PID PPID C STIME TTY TIME CMD
20001 15017 13395 0 10:07 ? 00:00:07 /usr/bin/iperf -s
[lnevers@vhost2 ~]$ sudo vzpid 15017
Pid CTID Name
15017 6 iperf
}}}
From the container list we can see that the CID 6 is hostname VM-2.EG-MON-3.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com.
Look up container experiment information, for example pc-vm2-6 (CID 6), see start-up attributes in ''/var/emulab/boot/tmcc.pcvm2-5''.
{{{
[lnevers@vhost2 ~]$ ls /var/emulab/boot/tmcc.pcvm2-5
accounts creator disks ifconfig linkdelay mounts nodeuuid programs startupcmd tiptunnels traceinfo userenv
blobs delay eventkey jailconfig manifest nodeattributes nseconfigs routing syncserver tpmblob trafgens watchdoginfo
bridges dhcpdconf firewallinfo keyhash motelog nodeid plabconfig rpms tarballs tpmpubkey tunnels
[lnevers@vhost2 ~]$ more /var/emulab/boot/tmcc.pcvm2-5/ifconfig
INTERFACE IFACETYPE=vlan INET=10.42.13.42 MASK=255.255.255.0 ID=11 VMAC=02907d4e0e71 PMAC=10604B9B8216 RTABID=200 ENCAPSULATE=0 LAN=openflow-mesoscale-1 VT
AG=1750
}}}
Also review container for experiment logs:
{{{
[lnevers@vhost2 ~]$ ls /var/emulab/logs
bootsetup.debug tbvnode-pcvm2-10.all tbvnode-pcvm2-14.log tbvnode-pcvm2-4.log tbvnode-pcvm2-9.all tmccproxy.pcvm2-2.log
dhclient-enter.log tbvnode-pcvm2-10.log tbvnode-pcvm2-15.log tbvnode-pcvm2-5.all tbvnode-pcvm2-9.log tmccproxy.pcvm2-3.log
dhclient-exit.log tbvnode-pcvm2-11.all tbvnode-pcvm2-1.all tbvnode-pcvm2-5.log tmccproxy.pcvm2-10.log tmccproxy.pcvm2-4.log
dhclient.log tbvnode-pcvm2-11.log tbvnode-pcvm2-1.log tbvnode-pcvm2-6.all tmccproxy.pcvm2-11.log tmccproxy.pcvm2-5.log
emulab-systemd-swap.log tbvnode-pcvm2-12.all tbvnode-pcvm2-2.all tbvnode-pcvm2-6.log tmccproxy.pcvm2-12.log tmccproxy.pcvm2-6.log
emulab-watchdog.log tbvnode-pcvm2-12.log tbvnode-pcvm2-2.log tbvnode-pcvm2-7.all tmccproxy.pcvm2-13.log tmccproxy.pcvm2-7.log
progagent.debug tbvnode-pcvm2-13.all tbvnode-pcvm2-3.all tbvnode-pcvm2-7.log tmccproxy.pcvm2-14.log tmccproxy.pcvm2-8.log
progwrap.debug tbvnode-pcvm2-13.log tbvnode-pcvm2-3.log tbvnode-pcvm2-8.all tmccproxy.pcvm2-15.log tmccproxy.pcvm2-9.log
prunelvms tbvnode-pcvm2-14.all tbvnode-pcvm2-4.all tbvnode-pcvm2-8.log tmccproxy.pcvm2-1.log
[lnevers@vhost2 ~]$ ls -l /var/emulab/logs/tbvnode-pcvm2-6*
-rw-r--r-- 1 root root 433483 Mar 6 10:02 /var/emulab/logs/tbvnode-pcvm2-6.all
-rw-r--r-- 1 root root 13756 Mar 6 10:02 /var/emulab/logs/tbvnode-pcvm2-6.log
[lnevers@vhost2 ~]$
[lnevers@vhost2 ~]$ more /var/emulab/logs/tbvnode-pcvm2-6.log
TIMESTAMP: 10:02:23:478087 vnodesetup starting the real work
TIMESTAMP: 10:02:23:487690 vnodesetup calling into libsetup
Checking Testbed generic VM configuration ...
TIMESTAMP: 10:02:23:542273 vnodesetup back from libsetup
TIMESTAMP: 10:02:23:580189 vnodesetup (12570) waiting on vnode (12595)
TIMESTAMP: 10:02:23:580331 vnodesetup (12595) execing mkvnode.pl
libvnode: debug=1
TIMESTAMP: 03/06/2013 10:02:23:764243 starting openvz rootPreConfig()
TIMESTAMP: 03/06/2013 10:02:23:764494 finished openvz rootPreConfig()
GENVNODETYPE openvz
libops:
$VAR1 = 'openvz';
$VAR2 = {
'vnodeUnmount' => sub { "DUMMY" },
'vnodeDestroy' => sub { "DUMMY" },
'init' => sub { "DUMMY" },
'rootPostConfig' => sub { "DUMMY" },
'vnodeCreate' => sub { "DUMMY" },
'vnodeConfigResources' => sub { "DUMMY" },
'setDebug' => sub { "DUMMY" },
'vnodePreConfig' => sub { "DUMMY" },
'vnodeConfigDevices' => sub { "DUMMY" },
'vnodeReboot' => sub { "DUMMY" },
'vnodeState' => sub { "DUMMY" },
'vnodeExec' => sub { "DUMMY" },
'rootPreConfig' => sub { "DUMMY" },
'rootPreConfigNetwork' => sub { "DUMMY" },
'vnodePreConfigExpNetwork' => sub { "DUMMY" },
....
}}}
== Step 5. Determine information for terminated experiments ==
As experimenter terminate the experiments EG-MON-3 (2 VMs experiment) and IG-MON-3 (2 raw pc experiment).
Once the 2 experiments are terminated, as administrator use AM state, logs, or administrator interfaces to determine:
- how many other experiments were run in the past day.
- which GENI user created each of the terminated experiments.
- mapping of experiments to OpenVZ or exclusive hosts for each of the terminated experiments.
- control and dataplane MAC addresses assigned to each VM in each terminated experiment.
- IP addresses assigned by InstaGENI to each VM in each terminated experiment.
Additionally, verify resource allocation, ownership information, MAC Address and IP Address information for terminated experiments whether using OpenVZ VMs or Dedicate PCs.
All of these items can be found by logging into https://boss.instageni.gpolab.bbn.com, switching to "red dot" mode, and then from the "Administration" pull-down choosing "ProtoGENI History". The Aggregate History page all items required for this test:
[[Image(IG-MON-3-AggHistory.jpg)]]
First clicked on "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-MON-3" to get history for the experiment EG-MON-3 (2 VMs experiment):
[[BR]]
[[Image(IG-MON-3-SliceHistory.jpg)]].
[[BR]]
Also verified the "download all logs" link on the Log Files page and reviewed the content of files, which accurately capture the experiment EG-MON-3.
Back on the Aggregate History page, reviewed the manifest for the slice URN "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-MON-3" , which showed the following manifest that accurately captures the resources in the sliver:
{{{
}}}
Using the above approach determined the following information for the three experiments in this test case:
|| '''Slice ID''' || '''Sliver URN''' || '''Physical nodes''' || '''Component and hostname''' || '''Dataplane IPs and MACs'''|| Create/Terminated||
||2067||urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF|| pc2 ||pcvm2-9 (gpo-ig) ||10.42.18.43(02e922fceb01) ||2013-03-06 10:37:53/not terminated||
||2067||urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF|| pc2 ||pcvm2-10 (gpo-ig2)||10.42.18.42(0240e5291a6f) ||2013-03-06 10:37:53/not terminated||
||2050||urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-MON-3 || pc2 ||pcvm2-1 (VM-1) ||192.168.1.1(02104639f347) ||2013-03-06 10:02:16/2013-03-06 13:45:27||
||2050||urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-MON-3 || pc2 ||pcvm2-6 (VM-2) ||192.168.1.2(020063c74361) ||2013-03-06 10:02:16/2013-03-06 13:45:27||
||2044||urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3 || pc5 ||pc5 (PC-1) ||192.168.1.1(10604B9C476A) ||2013-03-06 09:50:29/2013-03-06 13:44:14||
||2044||urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3 || pc4 ||pc4 (PC-2) ||192.168.1.2(10604B9600D6) ||2013-03-06 09:50:29/2013-03-06 13:44:14||
== Step 6. Get !OpenFlow state information ==
As administrator verify ability to determine !OpenFlow resources in use on the dataplane switch, on the !FlowVisor VM, and on the FOAM VM.
First, determined list of controllers on dataplane switch for the 3 experiments on this page:
{{{
$ ssh boss.instageni.gpolab.com
[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
[lnevers@boss ~]$ ssh manager@procurve2
manager@procurve2's password:
HP-E5406zl# show openflow version
Openflow Version
HP Networking OpenFlow Agent Version 2.02w.
Based on Open vSwitch Reference Source code Version 1.0.0.
Switch software Version K.15.06.5008.
HP-E5406zl# show openflow 1750
Openflow Configuration - VLAN 1750
Openflow state [Disabled] : Enabled
Controller pseudo-URL : tcp:10.3.1.7:6633 *
Listener pseudo-URL :
Openflow software rate limit [100] : 100
Openflow connecting max backoff [60] : 60
Openflow hardware acceleration [Enabled] : Enabled
Openflow hardware rate limit [0] : 0
Openflow hardware stats max refresh rate [0] : 0
Openflow fail-secure [Disabled] : Enabled
Second Controller pseudo-URL :
Third Controller pseudo-URL :
Openflow Status - VLAN 1750
Switch MAC address : 84:34:97:C6:C9:00
Openflow datapath ID : 06D6843497C6C900
Controller connection status (1/1) : connected ; state: ACTIVE
Listening connection status : listening (1 connections)
SW Dpif n_flows: 1 ; cur_capacity:63 ; n_lost: 0
n_hit: 99113 ; n_missed: 3359938 ; n_frags: 0
Number of hardware rules: 7
HP-E5406zl#
}}}
The results show "Controller pseudo-URL : tcp:10.3.1.7:6633", where 10.3.1.7 is the address of the !FlowVisor VM and 6633 is the !FlowVisor port''. On the !FlowVisor node, we can determine the flows and find the ones associate with our experiment:
{{{
lnevers@flowvisor:~$ /sbin/ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:16:3e:f0:a1:03
inet addr:10.3.1.7 Bcast:10.3.1.255 Mask:255.255.255.0
inet6 addr: fe80::216:3eff:fef0:a103/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8867080 errors:0 dropped:0 overruns:0 frame:0
TX packets:17587207 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:854689692 (854.6 MB) TX bytes:2249284361 (2.2 GB)
Interrupt:32
$ fvctl --passwd-file=/etc/flowvisor.passwd listFlowSpace
Got reply:
rule 0: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x800,nw_dst=10.42.15.0/24,nw_src=10.42.15.0/24]],actionsList=[Slice:8a0abd6f-0f5a-469f-91d2-c7f990b849
rule 1: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x806,nw_dst=10.42.15.0/24,nw_src=10.42.15.0/24]],actionsList=[Slice:8a0abd6f-0f5a-469f-91d2-c7f990b849
rule 2: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x800,nw_dst=10.42.16.0/24,nw_src=10.42.16.0/24]],actionsList=[Slice:a92990b6-1ede-4dd7-b6f6-7b4a4bd36f
rule 3: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x806,nw_dst=10.42.16.0/24,nw_src=10.42.16.0/24]],actionsList=[Slice:a92990b6-1ede-4dd7-b6f6-7b4a4bd36f
rule 4: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x800,nw_dst=10.50.0.0/16,nw_src=10.50.0.0/16]],actionsList=[Slice:b7850c93-110f-4e63-a121-26f3449dac44
rule 5: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x806,nw_dst=10.50.0.0/16,nw_src=10.50.0.0/16]],actionsList=[Slice:b7850c93-110f-4e63-a121-26f3449dac44
rule 6: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x800,nw_dst=10.42.11.0/24,nw_src=10.42.11.0/24]],actionsList=[Slice:03f03910-1176-428b-b00f-d4d4ddaab9
rule 7: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x806,nw_dst=10.42.11.0/24,nw_src=10.42.11.0/24]],actionsList=[Slice:03f03910-1176-428b-b00f-d4d4ddaab9
rule 8: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x800,nw_dst=10.42.13.0/24,nw_src=10.42.13.0/24]],actionsList=[Slice:33a83d5f-4da1-4d98-8095-8b62623c26
rule 9: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x806,nw_dst=10.42.13.0/24,nw_src=10.42.13.0/24]],actionsList=[Slice:33a83d5f-4da1-4d98-8095-8b62623c26
rule 10: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x800,nw_dst=10.42.18.0/24,nw_src=10.42.18.0/24]],actionsList=[Slice:8070b745-84c7-47eb-8e04-63a764997
rule 11: FlowEntry[dpid=[06:d6:84:34:97:c6:c9:00],ruleMatch=[OFMatch[dl_type=0x806,nw_dst=10.42.18.0/24,nw_src=10.42.18.0/24]],actionsList=[Slice:8070b745-84c7-47eb-8e04-63a764997
lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd listSlices
Slice 0: fvadmin
Slice 1: 8a0abd6f-0f5a-469f-91d2-c7f990b8494e
Slice 2: a92990b6-1ede-4dd7-b6f6-7b4a4bd36fd7
Slice 3: b7850c93-110f-4e63-a121-26f3449dac44
Slice 4: 03f03910-1176-428b-b00f-d4d4ddaab9ab
Slice 5: 33a83d5f-4da1-4d98-8095-8b62623c26b1
Slice 6: 8070b745-84c7-47eb-8e04-63a764997f3a
lnevers@flowvisor:~$ fvctl --passwd-file=/etc/flowvisor.passwd getSliceInfo 8070b745-84c7-47eb-8e04-63a764997f3a
Got reply:
drop_policy=exact
connection_1=06:d6:84:34:97:c6:c9:00-->/192.1.242.135:51023-->mallorea.gpolab.bbn.com/192.1.249.185:33018
contact_email=lnevers@bbn.com
controller_hostname=mallorea.gpolab.bbn.com
controller_port=33018
creator=fvadmin
}}}
From the output above, the experiment IG-MON-3-OF (2 VMS with !OpenFlow) uses network 10.42.18.0, which is the the last two rules (rule 10 and rule 11) and these rules are associated
with slice "Slice:8070b745-84c7-47eb-8e04-63a764997", whose details including controller are shown above.
== Step 7: verify MAC addresses on the rack dataplane switch ==
As administrator, login to dataplane switch and determine all MAC addresses for switch and determine which node owns those MAC addresses:
{{{
$ ssh boss.instageni.gpolab.com
[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
[lnevers@boss ~]$ ssh manager@procurve2
HP-E5406zl# show mac-address
Status and Counters - Port Address Table
MAC Address Port VLAN
------------- ------ ----
000099-989703 E20 10
00163e-f0a103 E20 10
10604b-9b69ce E20 10
000c29-b07408 E24 1750
0012e2-b8a5d0 E24 1750
0026b9-7e6cc8 E24 1750
0240e5-291a6f E5 1750
02c32c-c40467 E1 1750
02e922-fceb01 E4 1750
02fd27-710df7 E1 1750
fe163e-00627e E24 1750
000c29-90e378 E23 3705
000c29-96e3c0 E23 3705
0026b9-7e6cc8 E24 3705
78fe3d-d87e41 E24 3705
HP-E5406zl#
}}}
Based on earlier step, the IG-MON-3-OF MAC addressed used were:
|| '''Sliver URN''' || '''Physical nodes''' || '''Component and hostname''' || '''Dataplane IPs and MACs'''||
||urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF|| pc2 ||pcvm2-9 (gpo-ig) ||10.42.18.43(02e922-fceb01) ||
||urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-MON-3-OF|| pc2 ||pcvm2-10 (gpo-ig2)||10.42.18.42(0240e5-291a6f) ||
So the following are the mapping for our current active experiment IG-MON-3-OF:
{{{
MAC Address Port VLAN
------------- ------ ----
000099-989703 E20 10
00163e-f0a103 E20 10
10604b-9b69ce E20 10
000c29-b07408 E24 1750
0012e2-b8a5d0 E24 1750
0026b9-7e6cc8 E24 1750
0240e5-291a6f E5 1750 <<--pcvm2-10 (gpo-ig2)
02c32c-c40467 E1 1750
02e922-fceb01 E4 1750 <<--pcvm2-9 (gpo-ig)
02fd27-710df7 E1 1750
fe163e-00627e E24 1750
000c29-90e378 E23 3705
000c29-96e3c0 E23 3705
0026b9-7e6cc8 E24 3705
78fe3d-d87e41 E24 3705
}}}
== Step 8: verify active dataplane traffic ==
As administrator, login to dataplane switch and based on the information from Step 7, determine which interfaces are carrying traffic between the experimental VMs, collect interface counters for those interfaces:
{{{
$ ssh boss.instageni.gpolab.com
[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
[lnevers@boss ~]$ ssh manager@procurve2
HP-E5406zl# show mac-address vlan
Incomplete input: vlan
HP-E5406zl# show mac-address vlan 1750
Status and Counters - Address Table - VLAN 1750
MAC Address Port
------------- ------
000c29-b07408 E24
0012e2-b8a5d0 E24
0026b9-7e6cc8 E24
0240e5-291a6f E5 <<--pcvm2-10 (gpo-ig2)
02c32c-c40467 E1
02e922-fceb01 E4 <<--pcvm2-9 (gpo-ig)
02fd27-710df7 E1
fe163e-00627e E24
HP-E5406zl# show interfaces E5
Status and Counters - Port Counters for port E5
Name :
MAC Address : 843497-c6d99b
Link Status : Up
Totals (Since boot or last clear) :
Bytes Rx : 1,347,928,360 Bytes Tx : 2,572,312,413
Unicast Rx : 15,250,766 Unicast Tx : 53,984,104
Bcast/Mcast Rx : 35,508 Bcast/Mcast Tx : 772,396
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Tx : 746
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 0 Deferred Tx : 0
Others (Since boot or last clear) :
Discard Rx : 0 Out Queue Len : 0
Unknown Protos : 0
Rates (5 minute weighted average) :
Total Rx (bps) : 4,990,672 Total Tx (bps) : 5,004,784
Unicast Rx (Pkts/sec) : 1 Unicast Tx (Pkts/sec) : 1
B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 2
Utilization Rx : 00.49 % Utilization Tx : 00.50 %
HP-E5406zl# show interfaces E4
Status and Counters - Port Counters for port E4
Name :
MAC Address : 843497-c6d99c
Link Status : Up
Totals (Since boot or last clear) :
Bytes Rx : 2,934,314,299 Bytes Tx : 2,000,461,763
Unicast Rx : 91,580,161 Unicast Tx : 56,558,013
Bcast/Mcast Rx : 107,824 Bcast/Mcast Tx : 2,925,691
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Tx : 0
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 0 Deferred Tx : 0
Others (Since boot or last clear) :
Discard Rx : 0 Out Queue Len : 0
Unknown Protos : 0
Rates (5 minute weighted average) :
Total Rx (bps) : 4,990,816 Total Tx (bps) : 5,004,792
Unicast Rx (Pkts/sec) : 1 Unicast Tx (Pkts/sec) : 1
B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 3
Utilization Rx : 00.49 % Utilization Tx : 00.50 %
HP-E5406zl#
}}}