= EG-EXP-7:  Click Router Experiment Acceptance Test =

This page captures status for the test case EG-EXP-2, which verifies a click router scenario between two racks. For overall status see the [wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus InstaGENI Acceptance Test Status] page.

''Last update: 2013/01/09''

= Test Status =

This section captures the status for each step in the acceptance test plan.

|| '''Step''' || '''State'''           || '''Date completed'''    ||''' Ticket ''' || '''Comments''' ||
|| Step 1     ||                       ||                         ||               ||                ||
|| Step 2     ||                       ||                         ||               ||                ||
|| Step 3     ||                       ||                         ||               ||                ||
|| Step 4     ||                       ||                         ||               ||                ||
|| Step 5     ||                       ||                         ||               ||                ||
|| Step 6     ||                       ||                         ||               ||                ||
|| Step 7     ||                       ||                         ||               ||                ||
|| Step 8     ||                       ||                         ||               ||                ||
|| Step 9     ||                       ||                         ||               ||                ||
|| Step 10    ||                       ||                         ||               ||                ||
|| Step 11    ||                       ||                         ||               ||                ||
|| Step 12    ||                       ||                         ||               ||                ||
|| Step 13    ||                       ||                         ||               ||                ||
|| Step 14    ||                       ||                         ||               ||                ||
|| Step 15    ||                       ||                         ||               ||                ||
|| Step 16    ||                       ||                         ||               ||                ||


[[BR]]
|| '''State Legend'''                     || '''Description'''                                                    ||
|| [[Color(green,Pass)]]                  || Test completed and met all criteria                                  ||
|| [[Color(#98FB98,Pass: most criteria)]] || Test completed and met most criteria. Exceptions documented          ||
|| [[Color(red,Fail)]]                    || Test completed and failed to meet criteria.                          ||
|| [[Color(yellow,Complete)]]             || Test completed but will require re-execution due to expected changes ||
|| [[Color(orange,Blocked)]]              || Blocked by ticketed issue(s).                                        ||
|| [[Color(#63B8FF,In Progress)]]         || Currently under test.                                                ||
[[BR]]



= Test Plan Steps =
the following aggregate manager nicknames are used:
{{{
ig-utah=,https://utah.geniracks.net/protogeni/xmlrpc/am/2.0
ig-gpo=,https://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0
}}}

== 1. As Experimenter1, request !ListResources from GPO and Utah InstaGENI ==
As user lnevers@bbn.com requested listresources from GPO and Utah InstaGENI aggregates:
{{{
$ omni.py listresources -a ig-gpo -o
$ omni.py listresources -a ig-utah -o
}}}

== 2. Review !ListResources output from both AMs ==
Reviews output files ''rspec-instageni-gpolab-bbn-com-protogeniv2.xml'' and ''rspec-utah-geniracks-net-protogeniv2.xml'' to determine available resources.

== 3. Define a request RSpec for three VMs at BBN InstaGENI ==

== 4. Define a request RSpec for three VMs at Utah InstaGENI ==

== 5. Create slice ==

== 6. Create a sliver == 
In the slice IG-EXP-7 create a slivers at each AM, using the RSpecs defined above. 
{{{

}}}

== 7. Install Click router ==

Download the Click Router software on the 4 nodes that will be routers in the experiment. Build the user-level Click program in the 'userlevel' directory on each of the 4 router nodes.

== 8. Determine Click router settings ==
Determine the interface to MAC address mapping, and various settings required for the 4 router node and modify click configuration.

== 9. Run the user-level Click router ==
Run the user-level Click router by providing the configuration file name as an argument on each node.

== 10. Log in to Host1 and send traffic to host2 ==

Log in to Host1 and send traffic to host2 and leave traffic running.

== 11. Review Click logs on each Click router ==

== 16. Delete slivers ==