Changes between Version 21 and Version 22 of GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-5

Timestamp:

08/24/12 13:09:23 (11 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-5

@@ -4 +4 @@
 This page captures status for the test case IG-EXP-5, which verifies the ability to support !OpenFlow operations and integration with meso-scale compute resources and other compute resources external to the InstaGENI rack. For overall status see the [wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus InstaGENI Acceptance Test Status] page.
 
-''Last Update: 08/20/12''
+''Last Update: 08/24/12''
 
 = Test Status =
@@ -196 +196 @@
 == 13. Review baseline, GMOC, and meso-scale monitoring statistics  ==
 
-Monitoring status is replaced by iperf tests.
+Checking of monitoring status is replaced by iperf tests. Add capture here.
 
 == 14. As Experimenter2, determine Utah site compute resources and define RSpec ==
@@ -255 +255 @@
 
 == 24. Create a sliver for the meso-scale compute resources ==
-Requested the MyPLC node xXX at the Clemson resource aggregate:
+Requested the MyPLC node at the Clemson resource aggregate:
 
 {{{
@@ -308 +308 @@
 == 26. As Experimenter2, insert flowmods and send packet-outs only for traffic assigned to the slivers ==
 
-Nox controller with support for flow-mods available after GEC14.
+Need to get controller that cand do flowmods.
 
 == 27. Verify that traffic is delivered to target according to the flowmods settings ==
@@ -314 +314 @@
 
 == 28. Review baseline, GMOC, and monitoring statistics ==
+
+Insert Iperf results here:
 
 Reviewed the monitoring information available about this experiment, first found the sliver in the list of slices:
@@ -334 +336 @@
 == 29. Stop traffic and delete slivers ==
 
-Stopped traffic to review statistics, but did not delete slivers, trying to run experiment as long as possible before GEC14.
+Stopped traffic, and deleted slivers.
+
+As Expeirenter1:
+{{{
+}}}
+
+As Expeirenter2:
+{{{
+}}}