= IG-EXP-4: InstaGENI Multi-site Acceptance Test =

This page captures status for the test case IG-EXP-4, which verifies the ability to support basic operations of VMs and data flows between two racks. For overall status see the [wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus InstaGENI Acceptance Test Status] page.


= Test Status =
This section captures the status for each step in the acceptance test plan.

|| '''Step''' || '''State'''           || '''Date completed'''    ||''' Ticket ''' || '''Comments''' ||
|| Step 1     ||                       ||                         ||               ||                ||
|| Step 2     ||                       ||                         ||               ||                ||
|| Step 3     ||                       ||                         ||               ||                ||
|| Step 4     ||                       ||                         ||               ||                ||
|| Step 5     ||                       ||                         ||               ||                ||
|| Step 6     ||                       ||                         ||               ||                ||
|| Step 7     ||                       ||                         ||               ||                ||
|| Step 8     ||                       ||                         ||               ||                ||
|| Step 9     ||                       ||                         ||               ||                ||
|| Step 10    ||                       ||                         ||               ||                ||
|| Step 11    ||                       ||                         ||               ||                ||
|| Step 12    ||                       ||                         ||               ||                ||
|| Step 13    ||                       ||                         ||               ||                ||
|| Step 14    ||                       ||                         ||               ||                ||
|| Step 15    ||                       ||                         ||               ||                ||
|| Step 16    ||                       ||                         ||               ||                ||
|| Step 17    ||                       ||                         ||               ||                ||
|| Step 18    ||                       ||                         ||               ||                ||
|| Step 19    ||                       ||                         ||               ||                ||


 || ''State Legend''                   ||  ''Description ''            || 
 || ||
 || [[Color(green,Pass)]]                   || Test completed and met all criteria   ||
 || [[Color( #98FB98, #100000 , Pass)]]     || Test completed and met most criteria. Exceptions documented||
 || [[Color( #F0FFF0, #100000 , Complete)]] || Test completed but requiring re-execution due to expected changes ||
 || [[Color( #B0E0E6, #100000 , Complete)]] || Test completed with workaround for ticketed issue(s)||
 || [[Color(#CAE1FF,Workaround)]]           || Test in progress with workaround for ticketed issue(s).      || 
 || [[Color(#63B8FF,In Progress)]]          || Currently under test.     || 
 || [[Color(red,Fail)]]                     || Test completed and failed to meet criteria.  ||
 || [[Color(orange,Blocked)]]               || Blocked by ticketed issue(s).      ||


= Test Plan Steps =

 1. As Experimenter1, Request !ListResources from BBN InstaGENI.
 2. Request !ListResources from Utah InstaGENI.
 3. Review !ListResources output from both AMs.
 4. Define a request RSpec for a VM at BBN InstaGENI.
 5. Define a request RSpec for a VM at Utah InstaGENI and an unbound exclusive non-!OpenFlow VLAN to connect the 2 endpoints. 
 6. Create the first slice.
 7. Create a sliver at each InstaGENI aggregate using the RSpecs defined above.
 8. Log in to each of the systems, and send traffic to the other system, leave traffic running.
 9. As Experimenter2, Request !ListResources from BBN and Utah InstaGENI.
 9. Define a request RSpec for one VM and one bare metal node in the BBN InstaGENI rack. Each resource should have two logical interfaces and a 3rd VLAN for the local connection.
 10. Define a request RSpec to add two VMs at Utah and two VLANs to connect the BBN InstaGENI to the Utah InstaGENI.
 11. Create a second slice.
 12. In the second slice, create a sliver at each InstaGENI aggregate using the RSpecs defined above.
 13. Log in to each of the end-point systems, and send traffic to the other end-point system which shares the same VLAN.
 14. Verify traffic handling per experiment, VM isolation, and MAC address assignment.
 15. Construct and send a non-IP ethernet packet over the data plane interface.
 16. Review baseline monitoring statistics.
 17. Run test for at least 4 hours.
 18. Review baseline monitoring statistics.
 19. Stop traffic and delete slivers.