| 1 | |
| 2 | = IG-EXP-4: InstaGENI Multi-site Acceptance Test = |
| 3 | |
| 4 | This page captures status for the test case IG-EXP-4, which verifies the ability to support basic operations of VMs and data flows between two racks. For overall status see the [wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus InstaGENI Acceptance Test Status] page. |
| 5 | |
| 6 | |
| 7 | = Test Status = |
| 8 | This section captures the status for each step in the acceptance test plan. |
| 9 | |
| 10 | || '''Step''' || '''State''' || '''Date completed''' ||''' Ticket ''' || '''Comments''' || |
| 11 | || Step 1 || || || || || |
| 12 | || Step 2 || || || || || |
| 13 | || Step 3 || || || || || |
| 14 | || Step 4 || || || || || |
| 15 | || Step 5 || || || || || |
| 16 | || Step 6 || || || || || |
| 17 | || Step 7 || || || || || |
| 18 | || Step 8 || || || || || |
| 19 | || Step 9 || || || || || |
| 20 | || Step 10 || || || || || |
| 21 | || Step 11 || || || || || |
| 22 | || Step 12 || || || || || |
| 23 | || Step 13 || || || || || |
| 24 | || Step 14 || || || || || |
| 25 | || Step 15 || || || || || |
| 26 | || Step 16 || || || || || |
| 27 | || Step 17 || || || || || |
| 28 | || Step 18 || || || || || |
| 29 | || Step 19 || || || || || |
| 30 | |
| 31 | |
| 32 | || ''State Legend'' || ''Description '' || |
| 33 | || || |
| 34 | || [[Color(green,Pass)]] || Test completed and met all criteria || |
| 35 | || [[Color( #98FB98, #100000 , Pass)]] || Test completed and met most criteria. Exceptions documented|| |
| 36 | || [[Color( #F0FFF0, #100000 , Complete)]] || Test completed but requiring re-execution due to expected changes || |
| 37 | || [[Color( #B0E0E6, #100000 , Complete)]] || Test completed with workaround for ticketed issue(s)|| |
| 38 | || [[Color(#CAE1FF,Workaround)]] || Test in progress with workaround for ticketed issue(s). || |
| 39 | || [[Color(#63B8FF,In Progress)]] || Currently under test. || |
| 40 | || [[Color(red,Fail)]] || Test completed and failed to meet criteria. || |
| 41 | || [[Color(orange,Blocked)]] || Blocked by ticketed issue(s). || |
| 42 | |
| 43 | |
| 44 | = Test Plan Steps = |
| 45 | |
| 46 | 1. As Experimenter1, Request !ListResources from BBN InstaGENI. |
| 47 | 2. Request !ListResources from Utah InstaGENI. |
| 48 | 3. Review !ListResources output from both AMs. |
| 49 | 4. Define a request RSpec for a VM at BBN InstaGENI. |
| 50 | 5. Define a request RSpec for a VM at Utah InstaGENI and an unbound exclusive non-!OpenFlow VLAN to connect the 2 endpoints. |
| 51 | 6. Create the first slice. |
| 52 | 7. Create a sliver at each InstaGENI aggregate using the RSpecs defined above. |
| 53 | 8. Log in to each of the systems, and send traffic to the other system, leave traffic running. |
| 54 | 9. As Experimenter2, Request !ListResources from BBN and Utah InstaGENI. |
| 55 | 9. Define a request RSpec for one VM and one bare metal node in the BBN InstaGENI rack. Each resource should have two logical interfaces and a 3rd VLAN for the local connection. |
| 56 | 10. Define a request RSpec to add two VMs at Utah and two VLANs to connect the BBN InstaGENI to the Utah InstaGENI. |
| 57 | 11. Create a second slice. |
| 58 | 12. In the second slice, create a sliver at each InstaGENI aggregate using the RSpecs defined above. |
| 59 | 13. Log in to each of the end-point systems, and send traffic to the other end-point system which shares the same VLAN. |
| 60 | 14. Verify traffic handling per experiment, VM isolation, and MAC address assignment. |
| 61 | 15. Construct and send a non-IP ethernet packet over the data plane interface. |
| 62 | 16. Review baseline monitoring statistics. |
| 63 | 17. Run test for at least 4 hours. |
| 64 | 18. Review baseline monitoring statistics. |
| 65 | 19. Stop traffic and delete slivers. |