= EG-EXP-2: InstaGENI Single Site Acceptance Test =
This page captures status for the test case EG-EXP-2, which verifies basic operations of VMs and data flows within one rack. For overall status see the [wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus InstaGENI Acceptance Test Status] page.
= Test Status =
This section captures the status for each step in the acceptance test plan.
|| '''Step''' || '''State''' || '''Date completed''' ||''' Ticket ''' || '''Comments''' ||
|| Step 1 ||[[Color(green,Pass)]] || || instaticket:14||Minor, multiple default images listed||
|| Step 2 ||[[Color(green,Pass)]] || || || Customized Ubuntu image available||
|| Step 3 ||[[Color(green,Pass)]] || || || ||
|| Step 4 ||[[Color(#98FB98,Pass: most criteria)]] || ||instaticket:19||OpenVZ=Fedora15, cannot request other VM OS, suggestion: modify test to use Fedora for VM. ||
|| Step 5 ||[[Color(green,Pass)]] || || || ||
|| Step 6 ||[[Color(green,Pass)]] || || || ||
|| Step 7 ||[[Color(green,Pass)]] || || || ||
|| Step 8 ||[[Color(green,Pass)]] || || || ||
|| Step 9 ||[[Color(green,Pass)]] || || || ||
|| Step 10 ||[[Color(green,Pass)]] || || || ||
|| Step 11 ||[[Color(green,Pass)]] || || ||2 raw-pc with custom OS - ok ||
|| Step 12 ||[[Color(green,Pass)]] || || || ||
|| Step 13 ||[[Color(green,Pass)]] || || || ||
|| Step 14 ||[[Color(green,Pass)]] || || || ||
|| Step 15 ||[[Color(green,Pass)]] || || || ||
|| Step 16 || || || || ||
|| Step 17 || || || || ||
|| Step 18 ||[[Color(green,Pass)]]|| || || ||
|| Step 19 ||[[Color(green,Pass)]]|| || || ||
|| Step 20 || || || || ||
[[BR]]
|| '''State Legend''' || '''Description''' ||
|| [[Color(green,Pass)]] || Test completed and met all criteria ||
|| [[Color(#98FB98,Pass: most criteria)]] || Test completed and met most criteria. Exceptions documented ||
|| [[Color(red,Fail)]] || Test completed and failed to meet criteria. ||
|| [[Color(yellow,Complete)]] || Test completed but will require re-execution due to expected changes ||
|| [[Color(orange,Blocked)]] || Blocked by ticketed issue(s). ||
|| [[Color(#63B8FF,In Progress)]] || Currently under test. ||
[[BR]]
= Prerequisites =
Status for test prerequisites:
__Prereq:__ InstaGENI makes available at least two Linux distributions and a FreeBSD image as stated in design document
__Status:__ Done
__Prereq:__ Two GPO customized Ubuntu image snapshots are available and have been manually uploaded by the rack administrator using available InstaGENI documentation. One Ubuntu image is for the VM and one Ubuntu image is for the physical node in this test.
__Status:__ Done
__Prereq:__ Traffic generation tools may be part of image or may be installed at experiment runtime.
__Status:__ Done: Only using ping with mixed sizes and rates for now.
__Prereq:__ Administrative accounts have been created for GPO staff on the Utah InstaGENI rack.
__Status:__ Done
__Prereq:__ GENI Experimenter1 and Experimenter2 accounts exist.
__Status:__ Done. Two account already exist, lnevers@bbn.com and lnevers1@bbn.com, these will be used in all acceptance tests.
__Prereq:__ Baseline Monitoring is in place for the entire Utah site, to ensure that any problems are quickly identified.
__Status:__ Blocked on prerequisite tests completion.
= Test Plan Steps =
== Step 1. As Experimenter1, request !ListResources from Utah InstaGENI ==
As experimenter lnevers@bbn.com requested the list of available resources as follows:
{{{
$ ./src/omni.py -a insta-utah listresources --available --api-version 2 -t GENI 3 --available -o
}}}
== Step 2. Review advertisement RSpec for a list of OS images which can be loaded, and identify available resources ==
Used the output file from previous step to determine list of OS images available and available compute resources:
{{{
$ egrep "node component|disk_image|available" rspec-boss-utah-geniracks-net-protogeni-xmlrpc-am-2-0.xml
}}}
The following disk images were listed:
{{{
}}}
Note 1: instaticket:14 written for duplicate default image in the Advertisement RSpec. [[BR]]
== Step 3. Verify that the GPO Ubuntu customized image is available in the advertisement RSpec ==
Defined customized OS image as defined in the [http://groups.geni.net/syseng/wiki/GENIRacksProjects/InstageniRackNotes/CustomOS Custom OS] InstaGENI notes page and in instaticket:20.
Images available are part of the listresources output which was collected as shown below:
{{{
$ ./src/omni.py -a https://boss.utah.geniracks.net/protogeni/xmlrpc/am/2.0 listresources --api-version 2 -t GENI 3 --available -o
}}}
Found that custom images along with available for PC1:
{{{
}}}
== Step 4. Define a request RSpec for two VMs, each with a GPO Ubuntu image ==
Test is also to request a publically routable IP address and public TCP/UDP port mapping for the control interface on each node
'''Issue:'''
Using advertised Ubuntu or FreeBSD images is not supported for sliver_type emulab-openvz. This does not allow the execution of step 4 in the IG-EXP-2 InstaGENI Single Site test case, found at http://groups.geni.net/geni/wiki/GENIRacksHome/AcceptanceTests/InstageniAcceptanceTestsPlan#IG-EXP-2:InstaGENISingleSiteAcceptanceTest.
Two options available:
(a) Modify step 4 to assume default image is used (Fedora15).
(b) Modify step 4 to assume a raw-pc is used to load the custom image, which duplicates later step 12 in the procedure.
Choosing option (a) for the execution of step 4, which implies that RSpec is modified to use default OpenVZ image.
== Step 5. Create the first slice ==
Created the slice as follows:
{{{
$ ./src/omni.py createslice ig-exp2-2vm
}}}
== Step 6. Create a sliver in the first slice, using the "modified" RSpec as defined in step 4 ==
Created a 2 VM sliver, checked sliver status for completion, and determine assigned host from the sliverstatus sliver manifest:
{{{
$ ./src/omni.py createsliver -a insta-utah ig-exp2-2vm --api-version 2 -t GENI 3 ./instarspec/insta-2vm-v3.rspec
$ ./src/omni.py sliverstatus -a insta-utah ig-exp2-2vm --api-version 2 -t GENI 3 -o
$ egrep "hostname|port" ig-exp2-2vm-sliverstatus-boss-utah-geniracks-net-protogeni-xmlrpc-am-2-0.json
}}}
== Step 7. Log in to each of the systems, and send traffic to the other system sharing a VLAN ==
First host:
{{{
lnevers@arendia:~$ ssh pc5.utah.geniracks.net -p 30010
Last login: Fri May 25 19:30:25 2012 from arendia.gpolab.bbn.com
[lnevers@host1 ~]$ /sbin/ifconfig | egrep "inet addr"
inet addr:172.17.5.1 Bcast:172.31.255.255 Mask:255.240.0.0
inet addr:127.0.0.1 Mask:255.0.0.0
inet addr:10.10.1.1 Bcast:10.10.1.255 Mask:255.255.255.0
inet addr:10.10.2.1 Bcast:10.10.2.255 Mask:255.255.255.0
[lnevers@host1 ~]$ ping 10.10.2.2 -c 5
PING 10.10.2.2 (10.10.2.2) 56(84) bytes of data.
64 bytes from 10.10.2.2: icmp_req=1 ttl=64 time=0.037 ms
64 bytes from 10.10.2.2: icmp_req=2 ttl=64 time=0.027 ms
64 bytes from 10.10.2.2: icmp_req=3 ttl=64 time=0.028 ms
64 bytes from 10.10.2.2: icmp_req=4 ttl=64 time=0.028 ms
64 bytes from 10.10.2.2: icmp_req=5 ttl=64 time=0.027 ms
--- 10.10.2.2 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.027/0.029/0.037/0.006 ms
[lnevers@host1 ~]$
}}}
Second host:
{{{
lnevers@arendia:~$ ssh pc5.utah.geniracks.net -p 30011
[lnevers@host2 ~]$ /sbin/ifconfig | egrep "inet addr"
inet addr:172.17.5.2 Bcast:172.31.255.255 Mask:255.240.0.0
inet addr:127.0.0.1 Mask:255.0.0.0
inet addr:10.10.1.2 Bcast:10.10.1.255 Mask:255.255.255.0
inet addr:10.10.2.2 Bcast:10.10.2.255 Mask:255.255.255.0
[lnevers@host2 ~]$ ping 10.10.2.1 -c 5
PING 10.10.2.1 (10.10.2.1) 56(84) bytes of data.
64 bytes from 10.10.2.1: icmp_req=1 ttl=64 time=0.037 ms
64 bytes from 10.10.2.1: icmp_req=2 ttl=64 time=0.027 ms
64 bytes from 10.10.2.1: icmp_req=3 ttl=64 time=0.028 ms
64 bytes from 10.10.2.1: icmp_req=4 ttl=64 time=0.027 ms
64 bytes from 10.10.2.1: icmp_req=5 ttl=64 time=0.027 ms
--- 10.10.2.1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.027/0.029/0.037/0.005 ms
[lnevers@host2 ~]$
}}}
== Step 8. Using root privileges on one of the VMs load a Kernel module. ==
Loading a kernel module is expected to not work on shared OpenVZ nodes, testing will proceed past this step.
== Step 9. Run a netcat listener and bind to port XYZ on each of the VMs in the Utah rack ==
Modified test to use iperf. Started iperf server on host2:
{{{
[lnevers@host2 ~]$ /usr/bin/iperf -s
}}}
== Step 10. Send traffic to port XYZ on each of the VMs in the Utah rack over the control network from any commodity Internet host ==
Started iperf on host1 to send to host2, with the following results:
On host1:
{{{
[lnevers@host1 ~]$ /usr/bin/iperf -c 10.10.1.2
------------------------------------------------------------
Client connecting to 10.10.1.2, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.10.1.1 port 42950 connected with 10.10.1.2 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 116 MBytes 97.5 Mbits/sec
}}}
On host2:
{{{
[lnevers@host2 ~]$ /usr/bin/iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 10.10.1.2 port 5001 connected with 10.10.1.1 port 42950
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.2 sec 116 MBytes 95.7 Mbits/sec
}}}
== Step 11. As Experimenter2, request !ListResources from Utah InstaGENI ==
As experimenter lnevers1@bbn.com requested the list of available resources as follows:
{{{
$ ./src/omni.py -a insta-utah listresources --available --api-version 2 -t GENI 3 --available -o
}}}
== Step 12. Define a request RSpec for two physical nodes, both using the uploaded GPO Ubuntu images ==
Created a 2 raw-pc RSpec using the Customized OS image. Add RSpec link to add here.
== Step 13. Create the second slice ==
The following command was used:
{{{
$ ./src/omni.py createslice lnubuntu12b
}}}
== Step 14. Create a sliver in the second slice, using the RSpec defined in step 12 ==
The following commands were used to create the sliver and determine the host assignement:
{{{
$ ./src/omni.py createsliver -a insta-utah --api-version 2 -t GENI 3 lnubuntu12b ./instarspec/insta-2rawpc-ubuntu12.rspec
$ ./src/omni.py sliverstatus -a insta-utah --api-version 2 -t GENI 3 lnubuntu12b -o
$ egrep "hostname|port" lnubuntu12b-sliverstatus-boss-utah-geniracks-net-protogeni-xmlrpc-am-2-0.json
}}}
== Step 15. Log in to each of the systems, and send traffic to the other system ==
Logged in to the first assigned host:
{{{
lnevers1@sendaria:~$ ssh pc4.utah.geniracks.net
Welcome to Ubuntu 12.04 LTS (GNU/Linux 2.6.38.7-1.0emulab x86_64)
* Documentation: https://help.ubuntu.com/
The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.
hostx:~% cat /etc/issue
Ubuntu 12.04 LTS \n \l
hostx:~%
}}}
Logged in to the second host:
{{{
lnevers1@sendaria:~$ ssh pc1.utah.geniracks.netWelcome to Ubuntu 12.04 LTS (GNU/Linux 2.6.38.7-1.0emulab x86_64)
* Documentation: https://help.ubuntu.com/
The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.
hosty:~% cat /etc/issue
Ubuntu 12.04 LTS \n \l
hosty:~%
}}}
== Step 16. Verify that experimenters 1 and 2 cannot use the control plane to access each other's resources ==
Verified network access from hostx to host2:
{{{
hostx:~% ifconfig eth0
eth0 Link encap:Ethernet HWaddr e8:39:35:b1:ec:9c
inet addr:155.98.34.14 Bcast:155.98.34.255 Mask:255.255.255.0
inet6 addr: fe80::ea39:35ff:feb1:ec9c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:952 errors:0 dropped:0 overruns:0 frame:0
TX packets:669 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:91246 (91.2 KB) TX bytes:84542 (84.5 KB)
Interrupt:30 Memory:f4000000-f4012800
hostx:~% ping -c 1 172.17.5.4
PING 172.17.5.4 (172.17.5.4) 56(84) bytes of data.
--- 172.17.5.4 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
hostx:~%
}}}
Verified network access from host2 to hostx:
{{{
[lnevers@host2 ~]$ /sbin/ifconfig eth999
eth999 Link encap:Ethernet HWaddr 00:00:AC:11:05:04
inet addr:172.17.5.4 Bcast:172.31.255.255 Mask:255.240.0.0
inet6 addr: fe80::200:acff:fe11:504/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1977 errors:0 dropped:0 overruns:0 frame:0
TX packets:1873 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:122593 (119.7 KiB) TX bytes:262672 (256.5 KiB)
[lnevers@host2 ~]$ ping -c 1 155.98.34.14
PING 155.98.34.14 (155.98.34.14) 56(84) bytes of data.
--- 155.98.34.14 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
[lnevers@host2 ~]$
}}}
Verified unauthenticated SSH access, as user lnevers1 tried to ssh to control interface for lnevers experiment:
{{{
hostx:~% ssh pc5.utah.geniracks.net -p 30267 -l lnevers
lnevers@pc5.utah.geniracks.net's password:
Permission denied, please try again.
lnevers@pc5.utah.geniracks.net's password:
Permission denied, please try again.
lnevers@pc5.utah.geniracks.net's password:
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).
hostx:~%
}}}
Verified shared writable filesystem mount for each user. As user lnevers accessed shared area:
{{{
[lnevers@host2 ~]$ id
uid=20001(lnevers) gid=504(pgeni-gpolab-bbn) groups=504(pgeni-gpolab-bbn),0(root)
[lnevers@host2 ~]$ ls -l /proj/pgeni-gpolab-bbn-com/exp/
total 6
drwxrwx--- 10 geniuser pgeni-gpolab-bbn 512 May 31 07:57 ecgtest
drwxrwx--- 10 geniuser pgeni-gpolab-bbn 512 Jun 1 08:19 ig-exp2-2vm
drwxrwx--- 10 geniuser pgeni-gpolab-bbn 512 Jun 1 08:25 lnubuntu12b
}}}
As user lnevers1 accessed shared area:
{{{
hostx:~% id
uid=20001(lnevers1) gid=504(pgeni-gpolab-bbn) groups=504(pgeni-gpolab-bbn),0(root)
hostx:~% cd /proj/pgeni-gpolab-bbn-com/exp/
hostx:/proj/pgeni-gpolab-bbn-com/exp% ls -l
total 6
drwxrwx--- 10 geniuser pgeni-gpolab-bbn 512 May 31 07:57 ecgtest
drwxrwx--- 10 geniuser pgeni-gpolab-bbn 512 Jun 1 08:19 ig-exp2-2vm
drwxrwx--- 10 geniuser pgeni-gpolab-bbn 512 Jun 1 08:25 lnubuntu12b
hostx:/proj/pgeni-gpolab-bbn-com/exp%
}}}
== Step 17. Review system statistics and VM isolation and network isolation on data plane ==
Reviewed statistics on one of the VM nodes:
{{{
[lnevers@host1 ~]$ vmstat -s
49311612 K total memory
1622396 K used memory
506288 K active memory
646452 K inactive memory
47689216 K free memory
192144 K buffer memory
805172 K swap cache
1050168 K total swap
0 K used swap
1050168 K free swap
292 non-nice user cpu ticks
0 nice user cpu ticks
114 system cpu ticks
11139308 idle cpu ticks
668 IO-wait cpu ticks
0 IRQ cpu ticks
0 softirq cpu ticks
4 stolen cpu ticks
25376 pages paged in
1428 pages paged out
0 pages swapped in
0 pages swapped out
0 interrupts
63676068 CPU context switches
1338560297 boot time
823425 forks
[lnevers@host1 ~]$ top
top - 11:27:01 up 3:08, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 16 total, 1 running, 15 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 49311612k total, 1623180k used, 47688432k free, 192372k buffers
Swap: 1050168k total, 0k used, 1050168k free, 805400k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 20 0 19236 1496 1248 S 0.0 0.0 0:00.01 init
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd/3
3 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khelper/3
35 root 20 0 15664 1212 644 S 0.0 0.0 0:00.01 crond
314 root 20 0 179m 1436 1048 S 0.0 0.0 0:00.03 rsyslogd
327 root 20 0 53216 1088 548 S 0.0 0.0 0:00.29 watchquagga
348 root 20 0 75096 1232 544 S 0.0 0.0 0:00.00 sshd
357 root 20 0 4152 468 344 S 0.0 0.0 0:00.00 pubsubd
407 root 20 0 135m 7620 1232 S 0.0 0.0 0:00.02 watchdog
544 root 20 0 135m 6948 960 S 0.0 0.0 0:00.00 rc.progagent
547 geniuser 20 0 20440 1464 1140 S 0.0 0.0 0:00.00 program-agent
563 root 20 0 43428 768 300 S 0.0 0.0 0:00.00 linktest
593 root 20 0 116m 4016 3120 S 0.0 0.0 0:00.01 sshd
595 lnevers 20 0 116m 1844 940 S 0.0 0.0 0:00.00 sshd
596 lnevers 20 0 16276 2160 1232 S 0.0 0.0 0:00.01 csh
664 lnevers 20 0 14940 1136 904 R 0.0 0.0 0:00.00 top
[lnevers@host1 ~]$ procinfo
Linux 2.6.32-042stab049.6.emulab.1 (root@vhost-1) (gcc 4.6.0 20110603 (Red Hat 4.6.0-10)) #1 12CPU [host1]
Memory: Total Used Free Shared Buffers
Mem: 49311612 1779116 47532496 0 195832
Swap: 1050168 0 1050168
Bootup: Fri Jun 1 08:18:17 2012 Load average: 0.12 0.06 0.02 1/19 682
user : 0:00:10.64 0.0 page in : 0
nice : 0:00:00.00 0.0 page out: 0
system: 0:00:02.02 0.0 swap in : 0
idle : 1d 8:11:46.75 83.1 swap out: 0
steal : 0:00:00.06 0.0
uptime: 3:13:41.57 context : 63864389 interrupts: 0
}}}
On the dedicated node:
{{{
hostx:~% vmstat -s
49419336 K total memory
1059348 K used memory
44628 K active memory
46848 K inactive memory
48359988 K free memory
21732 K buffer memory
45404 K swap cache
1050172 K total swap
0 K used swap
1050172 K free swap
376 non-nice user cpu ticks
0 nice user cpu ticks
858 system cpu ticks
12288487 idle cpu ticks
2752 IO-wait cpu ticks
0 IRQ cpu ticks
75 softirq cpu ticks
0 stolen cpu ticks
75657 pages paged in
23556 pages paged out
0 pages swapped in
0 pages swapped out
421030 interrupts
248000 CPU context switches
1338561265 boot time
1797 forks
hostx:~% top
top - 11:28:56 up 2:54, 2 users, load average: 0.08, 0.04, 0.05
Tasks: 125 total, 1 running, 124 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 49419336k total, 1059900k used, 48359436k free, 21800k buffers
Swap: 1050172k total, 0k used, 1050172k free, 45496k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1808 lnevers1 20 0 17332 1308 960 R 0 0.0 0:00.01 top
1 root 20 0 24456 2388 1344 S 0 0.0 0:04.39 init
2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/0
4 root 20 0 0 0 0 S 0 0.0 0:00.29 kworker/0:0
5 root 20 0 0 0 0 S 0 0.0 0:00.27 kworker/u:0
6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0
7 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1
8 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/1:0
9 root 20 0 0 0 0 S 0 0.0 0:00.03 ksoftirqd/1
10 root 20 0 0 0 0 S 0 0.0 0:00.02 kworker/0:1
11 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/2
12 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/2:0
13 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2
14 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/3
15 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/3:0
16 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/3
17 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/4
18 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/4:0
19 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/4
20 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/5
21 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/5:0
22 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/5
23 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/6
24 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/6:0
25 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/6
26 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/7
27 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/7:0
28 root 20 0 0 0 0 S 0 0.0 0:00.04 ksoftirqd/7
29 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/8
30 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/8:0
31 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/8
32 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/9
34 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/9
35 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/10
36 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/10:0
37 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/10
38 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/11
39 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/11:0
40 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/11
41 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset
42 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper
43 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns
44 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/u:1
45 root 20 0 0 0 0 S 0 0.0 0:00.01 sync_supers
46 root 20 0 0 0 0 S 0 0.0 0:00.00 bdi-default
47 root 0 -20 0 0 0 S 0 0.0 0:00.00 kintegrityd
hostx:~% procinfo
Memory: Total Used Free Buffers
RAM: 49419336 1164780 48254556 25200
Swap: 1050172 0 1050172
Bootup: Fri Jun 1 08:34:25 2012 Load average: 0.01 0.07 0.07 1/134 3450
user : 00:00:06.71 0.0% page in : 134125
nice : 00:00:00.00 0.0% page out: 163352
system: 00:00:10.10 0.0% page act: 37656
IOwait: 00:00:47.97 0.0% page dea: 0
hw irq: 00:00:00.00 0.0% page flt: 1090830
sw irq: 00:00:00.76 0.0% swap in : 0
idle : 1d 12:27:36.79 100.0% swap out: 0
uptime: 03:02:26.07 context : 286680
irq 0: 84 timer irq 73: 18185 eth1-2
irq 1: 2 i8042 irq 74: 0 eth1-3
irq 4: 263 serial irq 75: 0 eth1-4
irq 8: 1 rtc0 irq 76: 18242 eth1-5
irq 9: 0 acpi irq 77: 0 eth1-6
irq 12: 4 i8042 irq 78: 0 eth1-7
irq 17: 32 uhci_hcd:usb6 irq 98: 2293 eth0-0
irq 20: 0 ehci_hcd:usb1, uh irq 99: 362 eth0-1
irq 22: 0 uhci_hcd:usb4 irq 100: 92 eth0-2
irq 23: 0 uhci_hcd:usb3, uh irq 101: 9214 eth0-3
irq 64: 0 dmar0 irq 102: 381 eth0-4
irq 67: 15294 hpsa0 irq 103: 677 eth0-5
irq 71: 67 eth1-0 irq 104: 8510 eth0-6
irq 72: 0 eth1-1 irq 105: 1605 eth0-7
sda 6341r 10135w
eth0 TX 1.66MiB RX 1.33MiB eth3 TX 0.00B RX 0.00B
eth1 TX 8.96MiB RX 8.96MiB lo TX 7.76KiB RX 7.76KiB
eth2 TX 0.00B RX 0.00B
}}}
== Step 18. Verify that each VM has a distinct MAC address for that interface ==
On the first host:
{{{
hosty:~% ifconfig -a|grep HW
eth0 Link encap:Ethernet HWaddr e8:39:35:b1:0f:94
eth1 Link encap:Ethernet HWaddr e8:39:35:b1:0f:96
eth2 Link encap:Ethernet HWaddr e8:39:35:b1:0f:64
eth3 Link encap:Ethernet HWaddr e8:39:35:b1:0f:66
}}}
On the second host:
{{{
hostx:~% ifconfig -a|grep HW
eth0 Link encap:Ethernet HWaddr e8:39:35:b1:ec:9c
eth1 Link encap:Ethernet HWaddr e8:39:35:b1:ec:9e
eth2 Link encap:Ethernet HWaddr e8:39:35:b1:ec:d0
eth3 Link encap:Ethernet HWaddr e8:39:35:b1:ec:d2
}}}
== Step 19. Verify that VMs' MAC addresses are learned on the data plane switch ==
Successfully exchanged traffic over the dataplane, as shown by ARP tables.
ARP table on hosty:
{{{
hosty:~% arp -a
ops.utah.geniracks.net (155.98.34.5) at 00:00:9b:62:24:e0 [ether] on eth0
? (155.98.34.1) at 00:d0:bc:f4:14:f8 [ether] on eth0
boss.utah.geniracks.net (155.98.34.4) at 00:00:9b:62:24:df [ether] on eth0
hostX-lan0 (10.10.1.1) at e8:39:35:b1:ec:9e [ether] on eth1
hosty:~%
}}}
ARP table on hostx:
{{{
hostx:~% arp -a
ops.utah.geniracks.net (155.98.34.5) at 00:00:9b:62:24:e0 [ether] on eth0
? (155.98.34.1) at 00:d0:bc:f4:14:f8 [ether] on eth0
boss.utah.geniracks.net (155.98.34.4) at 00:00:9b:62:24:df [ether] on eth0
hostY-lan0 (10.10.1.2) at e8:39:35:b1:0f:96 [ether] on eth1
hostx:~%
}}}
== Step 20. Stop traffic and delete slivers ==