Changes between Version 18 and Version 19 of GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-2


Ignore:
Timestamp:
05/22/12 18:35:03 (7 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-2

    v18 v19  
    1010|| '''Step''' || '''State'''                           || '''Date completed'''    ||''' Ticket ''' || '''Comments''' ||
    1111|| Step 1     || [[Color(orange,Blocked)]] ||                         || instaticket:14|| Blocked on prerequisite tests completion||
    12 || Step 2     || [[Color(orange,Blocked)]]  ||                         || instaticket:20||                ||
     12|| Step 2     || [[Color(orange,Blocked)]] ||                         || instaticket:20 Custom image ||                ||
    1313|| Step 3     ||                       ||                         ||               ||                ||
    1414|| Step 4     ||                       ||                         ||               ||                ||
     
    9494}}}
    9595
    96  Note 1:  instaticket:14 written for duplicate default image in the Advertisement RSpec. [[BR]]
     96 Note 1: instaticket:14 written for duplicate default image in the Advertisement RSpec. [[BR]]
    9797 Note 2: Sent email to geni-dev-utah to figure out procedure. [[BR]]
    9898 Note 3: Need to talk to Peter about Ubuntu images to build. [[BR]]
     
    100100== Step 3. Verify that the GPO Ubuntu customized image is available in the advertisement RSpec ==
    101101
     102Defined customized OS image as defined in the [http://groups.geni.net/syseng/wiki/GENIRacksProjects/InstageniRackNotes/CustomOS Custom OS] InstaGENI notes page.
     103Still working on making this image available to users.
     104
    102105== Step 4. Define a request RSpec for two VMs, each with a GPO Ubuntu image. Request a publically routable IP address and public TCP/UDP port mapping for the control interface on each node ==
     106
    103107== Step 5. Create the first slice ==
     108
    104109== Step 6. Create a sliver in the first slice, using the RSpec defined in step 4 ==
     110
    105111== Step 7. Log in to each of the systems, and send traffic to the other system sharing a VLAN ==
     112
    106113== Step 8. Using root privileges on one of the VMs load a Kernel module. It is expected this will not work on shared OpenVZ nodes, testing will proceed past this step ==
     114
    107115== Step 9. Run a netcat listener and bind to port XYZ on each of the VMs in the Utah rack ==
     116
    108117== Step 10. Send traffic to port XYZ on each of the VMs in the Utah rack over the control network from any commodity Internet host ==
     118
    109119== Step 11. As Experimenter2, request !ListResources from Utah InstaGENI ==
     120
    110121== Step 12. Define a request RSpec for two physical nodes, both using the uploaded GPO Ubuntu images ==
     122
    111123== Step 13. Create the second slice ==
     124
    112125== Step 14. Create a sliver in the second slice, using the RSpec defined in step 12 ==
     126
    113127== Step 15. Log in to each of the systems, and send traffic to the other system ==
     128
    114129== Step 16. Verify that experimenters 1 and 2 cannot use the control plane to access each other's resources (e.g. via unauthenticated SSH, shared writable filesystem mount) ==
     130
    115131== Step 17. Review system statistics and VM isolation and network isolation on data plane ==
     132
    116133== Step 18. Verify that each VM has a distinct MAC address for that interface ==
     134
    117135== Step 19. Verify that VMs' MAC addresses are learned on the data plane switch ==
     136
    118137== Step 20. Stop traffic and delete slivers ==