Changes between Version 33 and Version 34 of GENIRacksHome/ExogeniRacks/SiteConfirmationTests


Ignore:
Timestamp:
11/07/12 10:10:25 (11 years ago)
Author:
hdempsey@bbn.com
Comment:

Add comment about topology for cases with regionals.

Legend:

Unmodified
Added
Removed
Modified
  • GENIRacksHome/ExogeniRacks/SiteConfirmationTests

    v33 v34  
    3636== EG-CT-3 - Multiple sites experiment  ==
    3737
    38 This confirmation test creates a sliver at the New ExoGENI Site and one sliver at the GPO ExoGENI requesting one VM at each site.  (If the test is run to validate new software on the GPO ExoGENI site, the RENCI ExoGENI site is the second site in the test.)  All VMs exchange traffic and slivers are deleted upon completion.  The test topology used:
     38This confirmation test creates a sliver at the New ExoGENI Site and one sliver at the GPO ExoGENI requesting one VM at each site.  (If the test is run to validate new software on the GPO ExoGENI site, the RENCI ExoGENI site is the second site in the test.)  All VMs exchange traffic and slivers are deleted upon completion.  The test topology used is shown here:
    3939
    4040[[Image(EG-CT-3.jpg)]]
     41
     42Depending on the site, there may also be regional OpenFlow aggregates in the path from the site to the OpenFlow core network on Internet2 or NLR included in the test.  This note applies to all multi-site topologies used in the Site Confirmation Tests.
    4143
    4244Following is the sequence of AM operations for this test at each ExoGENI Rack: