= EG-EXP-6: ExoGENI and Meso-scale Multi-site !OpenFlow Acceptance Test =
This page captures status for the test case EG-EXP-6, which verifies ExoGENI rack interoperability with other meso-scale GENI sites. For overall status see the [wiki:GENIRacksHome/ExogeniRacks/AcceptanceTestStatus ExoGENI Acceptance Test Status] page. ''Last update: 09/17/12''
= Test Status =
This section captures the status for each step in the acceptance test plan.
|| '''Step''' || '''State''' || ''' Ticket ''' || '''Comments''' ||
|| Step 1 ||[[Color(yellow,Complete)]]|| || ||
|| Step 2 ||[[Color(yellow,Complete)]]|| || ||
|| Step 3 ||[[Color(yellow,Complete)]]|| || ||
|| Step 4 ||[[Color(yellow,Complete)]]|| || ||
|| Step 5 ||[[Color(yellow,Complete)]]|| || ||
|| Step 6 ||[[Color(yellow,Complete)]]|| || ||
|| Step 7 ||[[Color(yellow,Complete)]]|| || ||
|| Step 8 ||[[Color(yellow,Complete)]]|| || ||
|| Step 9 ||[[Color(yellow,Complete)]]|| || ||
|| Step 10 ||[[Color(yellow,Complete)]]|| || Replaced bare metal with VM||
|| Step 11 ||[[Color(yellow,Complete)]]|| || ||
|| Step 12 ||[[Color(yellow,Complete)]]|| || ||
|| Step 13 ||[[Color(yellow,Complete)]]|| || ||
|| Step 14 ||[[Color(yellow,Complete)]]|| || ||
|| Step 15 ||[[Color(yellow,Complete)]]|| || ||
|| Step 16 ||[[Color(yellow,Complete)]]|| || ||
|| Step 17 ||[[Color(yellow,Complete)]]|| || ||
|| Step 18 ||[[Color(yellow,Complete)]]|| || ||
|| Step 19 ||[[Color(yellow,Complete)]]|| || ||
|| Step 20 ||[[Color(yellow,Complete)]]|| || ||
|| Step 21 ||[[Color(yellow,Complete)]]|| || ||
|| Step 22 ||[[Color(yellow,Complete)]]|| || ||
|| Step 23 ||[[Color(yellow,Complete)]]|| || ||
|| Step 24 ||[[Color(yellow,Complete)]]|| || ||
|| Step 25 ||[[Color(yellow,Complete)]]|| || ||
|| Step 26 ||[[Color(yellow,Complete)]]|| || || ||
|| Step 27 ||[[Color(yellow,Complete)]]|| || || ||
|| Step 28 ||[[Color(yellow,Complete)]]|| || || ||
|| Step 29 ||[[Color(yellow,Complete)]]|| || || ||
|| Step 30 ||[[Color(yellow,Complete)]]|| || || ||
|| Step 31 ||[[Color(yellow,Complete)]]|| || || ||
|| Step 32 ||[[Color(yellow,Complete)]]|| || || ||
|| Step 33 ||[[Color(yellow,Complete)]]|| || || ||
|| Step 34 || || || || ||
|| Step 35 ||[[Color(yellow,Complete)]]| || || ||
|| Step 36 ||[[Color(yellow,Complete)]]|| || || ||
|| Step 37 ||[[Color(yellow,Complete)]]|| || || ||
[[BR]]
|| '''State Legend''' || '''Description''' ||
|| [[Color(green,Pass)]] || Test completed and met all criteria ||
|| [[Color(#98FB98,Pass: most criteria)]] || Test completed and met most criteria. Exceptions documented ||
|| [[Color(red,Fail)]] || Test completed and failed to meet criteria. ||
|| [[Color(yellow,Complete)]] || Test completed but will require re-execution due to expected changes ||
|| [[Color(orange,Blocked)]] || Blocked by ticketed issue(s). ||
|| [[Color(#63B8FF,In Progress)]] || Currently under test. ||
[[BR]]
= Test Plan Steps =
The pgeni.gpolab.bbn.com slice authority is used for the credentials and the following aggregate manager nick_names were defined in the omni_config:
{{{
#ExoGENI Compute and OF Aggregates Managers
exobbn=,https://bbn-hn.exogeni.net:11443/orca/xmlrpc
exorci=,https://rci-hn.exogeni.net:11443/orca/xmlrpc
exosm=,https://geni.renci.org:11443/orca/xmlrpc
of-exobbn=,https://bbn-hn.exogeni.net:3626/foam/gapi/1
of-exorci=,https://rci-hn.exogeni.net:3626/foam/gapi/1
#Meso-scale Compute and OF Aggregates Managers
of-bbn=,https://foam.gpolab.bbn.com:3626/foam/gapi/1
of-clemson=,https://foam.clemson.edu:3626/foam/gapi/1
of-i2=,https://foam.net.internet2.edu:3626/foam/gapi/1
of-rutgers=,https://nox.orbit-lab.org:3626/foam/gapi/1
plc-bbn=,http://myplc.gpolab.bbn.com:12346/
plc-clemson=,http://myplc.clemson.edu:12346/
pgeni=,https://pgeni.gpolab.bbn.com/protogeni/xmlrpc/am
pg2=,https://www.emulab.net/protogeni/xmlrpc/am/2.0
}}}
== 1. As Experimenter1, request !ListResources from BBN ExoGENI, RENCI ExoGENI, and FOAM at NLR Site. ==
GPO ProtoGENI user credentials for lnevers@bbn.com were used for Experimenter1.
Requested listresources from each of the FOAM aggregates:
{{{
$ omni.py listresources -a of-exobbn -o
$ omni.py listresources -a of-bbn -o
$ omni.py listresources -a of-nlr -o
$ omni.py listresources -a of-i2 -o
$ omni.py listresources -a of-exorci -o
}}}
== 2. Review !ListResources output from all AMs ==
Requested listresources from each of the GENI AM aggregates:
{{{
$ omni.py listresources -a plc-bbn -o
$ omni.py listresources -a plc-clemson -o
$ omni.py listresources -a pg2 --api-version 2 -t GENI 3 -o
$ omni.py listresources -a exobbn -o
$ omni.py listresources -a exorci -o
}}}
== 3. Define a request RSpec for a VM at the BBN ExoGENI. ==
Defined an RSpec for one VM on the shared VLAN 1750 in the BBN ExoGENI rack: [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp1-exobbn.rspec EG-EXP-6-exp1-exobbn.rspec]
== 4. Define a request RSpec for a VM at the RENCI ExoGENI. ==
Define an RSpec for one VM on the shared VLAN 1750 in the RENCI ExoGENI rack: [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp1-exorci.rspec EG-EXP-6-exp1-exorci.rspec]
== 5. Define request RSpecs for !OpenFlow resources from BBN FOAM to access GENI !OpenFlow core resources. ==
Defined an !OpenFlow RSpec for the FOAM controllers in each rack:
- BBN Rack RSpec: [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp1-openflow-exobbn.rspec EG-EXP-6-exp1-openflow-exobbn.rspec]
- RENCI Rack RSpec: [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp1-openflow-exorci.rspec EG-EXP-6-exp1-openflow-exorci.rspec]
The BBN ExoGENI rack connects to the GENI backbone via the BBN GPO Lab !OpenFlow switch named poblano. In order for this scenario to work !OpenFlow must be configured also on the poblano switch to allow the BBN ExoGENI rack OF traffic to get to the OF GENI core. The following !OpenFlow RSpec was defined for the BBN site switch poblano: [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp1-openflow-bbn.rspec EG-EXP-6-exp1-openflow-bbn.rspec]
== 6. Define request RSpecs for !OpenFlow core resources at NLR FOAM. ==
Defined an !OpenFlow RSpec for the NLR FOAM controller: [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp1-openflow-nlr.rspec EG-EXP-6-exp1-openflow-nlr.rspec]
== 7. Create the first slice ==
Created the first slice:
{{{
$ omni.py createslice EG-EXP-6-exp1
}}}
== 8. Create a sliver in the first slice at each AM, using the RSpecs defined above. ==
{{{
$ omni.py -a exobbn createsliver EG-EXP-6-exp1 EG-EXP-6-exp1-exobbn.rspec
$ omni.py -a of-exobbn createsliver EG-EXP-6-exp1 EG-EXP-6-exp1-openflow-exobbn.rspec
$ omni.py -a of-bbn createsliver EG-EXP-6-exp1 EG-EXP-6-exp1-openflow-bbn.rspec
$ omni.py -a of-nlr createsliver EG-EXP-6-exp1 EG-EXP-6-exp1-openflow-nlr.rspec
$ omni.py -a of-exorci createsliver EG-EXP-6-exp1 EG-EXP-6-exp1-openflow-exorci.rspec
$ omni.py -a exorci createsliver EG-EXP-6-exp1 EG-EXP-6-exp1-exorci.rspec
}}}
Here are of the Rspecs used: [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp1-exobbn.rspec EG-EXP-6-exp1-exobbn.rspec], [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp1-openflow-bbn.rspec EG-EXP-6-exp1-openflow-bbn.rspec], [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp1-openflow-nlr.rspec EG-EXP-6-exp1-openflow-nlr.rspec],
and [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp1-exorci.rspec EG-EXP-6-exp1-exorci.rspec].
== 9. Log in to each of the systems, verify IP address assignment. Send traffic to the other system, leave traffic running. ==
Determine the status of the !OpenFlow slivers, check the sliverstatus for each to make sure that they have been approved. Note that 'geni_status' is 'ready' when the sliver is approved. If the !OpenFlow sliver is waiting for approval the 'geni_status' will be 'configuring:
{{{
$ omni.py -a of-bbn sliverstatus EG-EXP-6-exp1
$ omni.py -a of-nlr sliverstatus EG-EXP-6-exp1
}}}
Determine compute resources allocated to each sliver in the ExoGENI racks. First make sure the sliverstatus is ready:
{{{
$ omni.py -a exobbn sliverstatus EG-EXP-6-exp1
$ omni.py -a exorci sliverstatus EG-EXP-6-exp1
}}}
Once the slivers are ready get the list of hosts allocated with Omni:
{{{
$ omni.py -a exobbn listresources EG-EXP-6-exp1 -o
$ omni.py -a exorci listresources EG-EXP-6-exp1 -o
$ egrep hostname EG-EXP-6-exp1-rspec-bbn-hn-exogeni-net-11443-orca.xml
$ egrep hostname EG-EXP-6-exp1-rspec-rci-hn-exogeni-net-11443-orca.xml
}}}
Login to BBN VM and send traffic to remote:
{{{
$ ssh root@192.1.242.6
root@debian:~# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 52:54:00:5a:92:fe
inet addr:10.42.19.27 Bcast:10.42.19.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fe5a:92fe/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:864 (864.0 B) TX bytes:398 (398.0 B)
root@debian:~# ping 10.42.19.25
PING 10.42.19.25 (10.42.19.25) 56(84) bytes of data.
64 bytes from 10.42.19.25: icmp_req=1 ttl=64 time=2353 ms
64 bytes from 10.42.19.25: icmp_req=2 ttl=64 time=1356 ms
64 bytes from 10.42.19.25: icmp_req=3 ttl=64 time=357 ms
64 bytes from 10.42.19.25: icmp_req=4 ttl=64 time=172 ms
}}}
Login to RENCI VM and send traffic to remote:
{{{
$ ssh root@152.54.14.13
root@debian:~# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 52:54:00:74:38:fd
inet addr:10.42.19.25 Bcast:10.42.255.255 Mask:255.255.0.0
inet6 addr: fe80::5054:ff:fe74:38fd/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:15 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1056 (1.0 KiB) TX bytes:398 (398.0 B)
root@debian:~# ping 10.42.19.27
PING 10.42.19.27 (10.42.19.27) 56(84) bytes of data.
64 bytes from 10.42.19.27: icmp_req=1 ttl=64 time=2408 ms
64 bytes from 10.42.19.27: icmp_req=2 ttl=64 time=1410 ms
64 bytes from 10.42.19.27: icmp_req=3 ttl=64 time=410 ms
64 bytes from 10.42.19.27: icmp_req=4 ttl=64 time=172 ms
}}}
== 10. As Experimenter2, define a request RSpec for one VM and one bare metal node at BBN ExoGENI. ==
GPO ProtoGENI user credentials for lnevers1@bbn.com were used for Experimenter2.
Requested listresources from each of the FOAM aggregates:
{{{
$ omni.py listresources -a of-exobbn -o
$ omni.py listresources -a of-bbn -o
$ omni.py listresources -a of-nlr -o
$ omni.py listresources -a of-exorci -o
}}}
Requested listresources from each of the ExoGENI aggregates:
{{{
$ omni.py listresources -a exobbn -o
$ omni.py listresources -a exorci -o
}}}
Defined an RSpec for one VM and one bare metal node on the shared VLAN 1750 in the BBN ExoGENI rack [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp2-exobbn.rspec EG-EXP-6-exp2-exobbn.rspec]. Attached as a reference, even though it could not be used for this test case as described.
The Bare Metal node is only available via the ExoSM, so in order to preserve the requests to the individual AMs, modified the RSpec to use 2 VMs, and the new RSpec used is [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp2-exobbn-mod.rspec EG-EXP-6-exp2-exobbn-mod.rspec].
== 11. Define a request RSpec for two VMs on the same worker node at RENCI ExoGENI. ==
Defined an RSpec for two VMs on the shared VLAN 1750 in the RENCI rack: [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp2-exorci.rspec EG-EXP-6-exp2-exorci.rspec]
== 12. Define request RSpecs for !OpenFlow resources from GPO FOAM to access GENI !OpenFlow core resources. ==
The experiment uses the flows defined by the RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp2-openflow-bbn.rspec EG-EXP-6-exp2-openflow-bbn.rspec].
== 13. Define request RSpecs for !OpenFlow core resources at NLR FOAM ==
The experiment uses the flows defined by the previous experiment, as defined in [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp2-openflow-nlr.rspec EG-EXP-6-exp2-openflow-nlr.rspec]
== 14. Create a second slice ==
{{{
$ omni.py createslice EG-EXP-6-exp2
}}}
== 15. Create a sliver in the second slice at each AM, using the RSpecs defined above ==
Because of the issues described in step 10, had to request to VMs on the shared VLAN 1750 at the BBN SM. The request:
{{{
$ omni.py -a exobbn createsliver EG-EXP-6-exp2 EG-EXP-6-exp2-exobbn-mod.rspec
}}}
Created a sliver at RENCI ExoGENIrack aggregate:
{{{
$ omni.py -a exorci createsliver EG-EXP-6-exp2 EG-EXP-6-exp2-exorci.rspec
}}}
Create a sliver for the network resources required by experiment 2:
{{{
$ omni.py -a of-exobbn createsliver EG-EXP-6-exp2 EG-EXP-6-exp2-openflow-exobbn.rspec
$ omni.py -a of-bbn createsliver EG-EXP-6-exp2 EG-EXP-6-exp2-openflow-bbn.rspec
$ omni.py -a of-nlr createsliver EG-EXP-6-exp2 EG-EXP-6-exp2-openflow-nlr.rspec
$ omni.py -a of-exorci createsliver EG-EXP-6-exp2 EG-EXP-6-exp2-openflow-exorci.rspec
}}}
== 16. Log in to each of the systems in the slice ==
Login to each system and send traffic to each other systems; leave traffic running.
Determine compute resources allocated to each sliver in the ExoGENI racks. First make sure the sliverstatus is ready:
{{{
$ omni.py -a exobbn sliverstatus EG-EXP-6-exp2
$ omni.py -a exorci sliverstatus EG-EXP-6-exp2
}}}
Once the slivers are ready get the list of hosts allocated with Omni:
{{{
$ omni.py -a exobbn listresources EG-EXP-6-exp2 -o
$ omni.py -a exorci listresources EG-EXP-6-exp2 -o
$ egrep hostname EG-EXP-6-exp2-rspec-bbn-hn-exogeni-net-11443-orca.xml
$ egrep hostname EG-EXP-6-exp2-rspec-rci-hn-exogeni-net-11443-orca.xml
}}}
Login to first BBN VM and send traffic to remote:
{{{
$ ssh root@192.1.242.7
root@debian:~# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 52:54:00:0e:77:26
inet addr:10.42.18.98 Bcast:10.42.18.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fe0e:7726/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1248 (1.2 KiB) TX bytes:398 (398.0 B)
root@debian:~# ping 10.42.18.15
PING 10.42.18.15 (10.42.18.15) 56(84) bytes of data.
64 bytes from 10.42.18.15: icmp_req=1 ttl=64 time=2277 ms
64 bytes from 10.42.18.15: icmp_req=2 ttl=64 time=1362 ms
64 bytes from 10.42.18.15: icmp_req=3 ttl=64 time=362 ms
64 bytes from 10.42.18.15: icmp_req=4 ttl=64 time=172 ms
}}}
Login to second BBN VM and send traffic to remote:
{{{
$ ssh root@192.1.242.8
root@debian:~# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 52:54:00:9f:cf:e6
inet addr:10.42.18.77 Bcast:10.42.18.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fe9f:cfe6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:21 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1440 (1.4 KiB) TX bytes:398 (398.0 B)
root@debian:~# ping 10.42.18.15
PING 10.42.18.15 (10.42.18.15) 56(84) bytes of data.
64 bytes from 10.42.18.15: icmp_req=1 ttl=64 time=2561 ms
64 bytes from 10.42.18.15: icmp_req=2 ttl=64 time=1562 ms
64 bytes from 10.42.18.15: icmp_req=3 ttl=64 time=654 ms
64 bytes from 10.42.18.15: icmp_req=4 ttl=64 time=171 ms
}}}
Login to first RENCI VM and send traffic to remote:
{{{
$ ssh root@152.54.14.14
root@debian:~# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 52:54:00:92:84:59
inet addr:10.42.18.16 Bcast:10.42.18.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fe92:8459/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:21 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1440 (1.4 KiB) TX bytes:398 (398.0 B)
root@debian:~# ping 10.42.18.98
PING 10.42.18.98 (10.42.18.98) 56(84) bytes of data.
64 bytes from 10.42.18.98: icmp_req=1 ttl=64 time=4554 ms
64 bytes from 10.42.18.98: icmp_req=4 ttl=64 time=1610 ms
64 bytes from 10.42.18.98: icmp_req=2 ttl=64 time=3610 ms
64 bytes from 10.42.18.98: icmp_req=5 ttl=64 time=710 ms
64 bytes from 10.42.18.98: icmp_req=3 ttl=64 time=2711 ms
64 bytes from 10.42.18.98: icmp_req=6 ttl=64 time=172 ms
}}}
Login to second RENCI VM and send traffic to remote:
{{{
$ ssh root@152.54.14.16
root@debian:~# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 52:54:00:4c:59:50
inet addr:10.42.18.15 Bcast:10.42.18.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fe4c:5950/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1116 (1.0 KiB) TX bytes:398 (398.0 B)
root@debian:~# ping 10.42.18.77
PING 10.42.18.77 (10.42.18.77) 56(84) bytes of data.
64 bytes from 10.42.18.77: icmp_req=1 ttl=64 time=2263 ms
64 bytes from 10.42.18.77: icmp_req=2 ttl=64 time=1339 ms
64 bytes from 10.42.18.77: icmp_req=3 ttl=64 time=394 ms
64 bytes from 10.42.18.77: icmp_req=4 ttl=64 time=171 ms
}}}
== 17. As Experimenter3, request !ListResources from BBN ExoGENI, GPO FOAM, and FOAM at Meso-scale Site ==
GPO ProtoGENI user credentials for lnevers2@bbn.com were used for Experimenter3.
Got a listresources from each aggregate in the experiment 2. Note, the WAPG resource at Rutgers is available via the Emulab ProtoGENI aggregate. Executed the following to get resources for each aggregate:
{{{
$ omni.py listresources -a exobbn -o
$ omni.py listresources -a of-bbn -o
$ omni.py listresources -a of-i2 -o
$ omni.py listresources -a of-rutgers -o
$ omni.py listresources -a pgeni -o
$ omni.py listresources -a pg2 --api-version 2 -t GENI 3 -o
}}}
== 18. Review !ListResources output from all AMs ==
Reviewed content of advertisement RSpecs for each of the aggregates polled in the previous step.
== 19. Define a request RSpec for a VM at the BBN ExoGENI ==
Defined RSpec for one VM on the shared VLAN 1750 in the BBN ExoGENI rack: [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp3-exobbn.rspec EG-EXP-6-exp3-exobbn.rspec]
== 20. Define a request RSpec for a compute resource at the GPO Meso-scale site ==
Defined RSpec for one PG Resource at the GPO PG site: [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp3-bbn-pgeni.rspec EG-EXP-6-exp3-bbn-pgeni.rspec]
== 21. Define a request RSpec for a compute resource at a Meso-scale site ==
Defined RSpec for one WAPG Resource at the Rutgers site [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp3-rutgers-wapg.rspec EG-EXP-6-exp3-rutgers-wapg.rspec]
== 22. Define request RSpecs for !OpenFlow resources to allow connection from OF BBN ExoGENI to Meso-scale OF sites GPO (NLR) and Rutgers Sites (I2) ==
Defined the !OpenFlow RSpecs for the sites below, note that the BBN OF RSpec overlaps with the one in experiment 1 and is being used here:
- Rutgers [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp3-openflow-rutgers.rspec EG-EXP-6-exp3-openflow-rutgers.rspec]
- BBN [EG-EXP-6-exp3-openflow-bbn.rspec]
- Internet2 [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp3-openflow-i2.rspec EG-EXP-6-exp3-openflow-i2.rspec]
== 23. Create a third slice ==
{{{
$ omni.py createslice EG-EXP-6-exp3
}}}
== 24. Create sliver that connects the Internet2 Meso-scale !OpenFlow site to the BBN ExoGENI Site, and the GPO Meso-scale site ==
Requests are as follows:
{{{
$ omni.py -a exobbn createsliver EG-EXP-6-exp3 EG-EXP-6-exp3-exobbn.rspec
$ omni.py -a of-exobbn createsliver EG-EXP-6-exp3 EG-EXP-6-exp3-openflow-exobbn.rspec
$ omni.py -a pgeni createsliver EG-EXP-6-exp3 EG-EXP-6-exp3-bbn-pgeni.rspec ## See Note1
$ omni.py -a of-bbn createsliver EG-EXP-6-exp3 EG-EXP-6-exp3-openflow-bbn.rspec
$ omni.py -a of-i2 createsliver EG-EXP-6-exp3 EG-EXP-6-exp3-openflow-i2.rspec
$ omni.py -a pg2 createsliver EG-EXP-6-exp3 --api-version 2 -t GENI 3 EG-EXP-6-exp3-rutgers-wapg.rspec ## Both WAPG not available
$ omni.py -a of-rutgers createsliver EG-EXP-6-exp3 EG-EXP-6-exp3-openflow-rutgers.rspec
}}}
Note: The GPO ProtoGENI reservation must be requested before the BBN OpenFlow FOAM request. This must be done to determine the port of the GPO PG node assigned, and then configure the BBN FOAM RSpec accordingly.
== 25. Log in to each of the compute resources in the slice ==
Determine which compute resources are allocated to the sliver in the BBN ExoGENI rack.
First make sure the sliverstatus is ready, then when the sliver is ready get the host allocated with Omni:
{{{
$ omni.py -a exobbn sliverstatus EG-EXP-6-exp3
$ omni.py -a exobbn listresources EG-EXP-6-exp3 -o
$ egrep hostname EG-EXP-6-exp3-rspec-bbn-hn-exogeni-net-11443-orca.xml
}}}
Determine the resources allocated to the WAPG Rutgers node:
{{{
$ omni.py -a pg2 sliverstatus EG-EXP-6-exp3 --api-version 2 -t GENI 3 -o
}}}
Determine the resources allocated to the GPO PG node:
{{{
$ omni.py -a pgeni sliverstatus EG-EXP-6-exp3
$ omni.py -a pgeni listresources EG-EXP-6-exp3 -o
$ egrep "hostname" EG-EXP-6-exp3-rspec-pgeni-gpolab-bbn-com.xml
}}}
Login to each node in the slice, configure data plane network interfaces on any non-ExoGENI resources as necessary,
and send traffic to each of the other systems; leave traffic running.
Login to ExoGENI Node and send traffic to GPO PG node:
{{{
$ ssh 192.1.242.9 -l root
eth1 Link encap:Ethernet HWaddr 52:54:00:e6:5e:1a
inet addr:10.42.11.198 Bcast:10.42.255.255 Mask:255.255.0.0
inet6 addr: fe80::5054:ff:fee6:5e1a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2496 (2.4 KiB) TX bytes:398 (398.0 B)
root@debian:~# ping 10.42.11.209
PING 10.42.11.209 (10.42.11.209) 56(84) bytes of data.
64 bytes from 10.42.11.209: icmp_req=1 ttl=64 time=40.0 ms
64 bytes from 10.42.11.209: icmp_req=2 ttl=64 time=2.74 ms
64 bytes from 10.42.11.209: icmp_req=3 ttl=64 time=0.501 ms
^C
--- 10.42.11.209 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 0.501/14.442/40.080/18.152 ms
}}}
Login to GPO PG node and send traffic to ExoGENI node:
{{{
$ ssh pc9.pgeni.gpolab.bbn.com
vm:~> ping 10.42.11.198
PING 10.42.11.198 (10.42.11.198) 56(84) bytes of data.
64 bytes from 10.42.11.198: icmp_seq=1 ttl=64 time=0.541 ms
64 bytes from 10.42.11.198: icmp_seq=2 ttl=64 time=0.415 ms
64 bytes from 10.42.11.198: icmp_seq=3 ttl=64 time=0.468 ms
^C
--- 10.42.11.198 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.415/0.474/0.541/0.057 ms
vm:~>
}}}
== 26. Verify that all three experiments continue to run ==
Verify that each experiment is running without impacting each other's traffic and verify that data is exchanged over the path along which data is supposed to flow.
Attempted to exchange traffic from Experimenter1 host to Experimenter2 host without success:
{{{
$ ssh root@192.1.242.6
Linux debian 2.6.32-5-amd64 #1 SMP Mon Jan 16 16:22:28 UTC 2012 x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Aug 15 19:38:46 2012 from arendia.gpolab.bbn.com
root@debian:~# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 52:54:00:5a:92:fe
inet addr:10.42.19.27 Bcast:10.42.19.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fe5a:92fe/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13662 errors:0 dropped:0 overruns:0 frame:0
TX packets:12215 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1217282 (1.1 MiB) TX bytes:1087918 (1.0 MiB)
root@debian:~# ping 10.42.18.15
PING 10.42.18.15 (10.42.18.15) 56(84) bytes of data.
From 64.119.128.41 icmp_seq=87 Destination Host Unreachable
}}}
Attempted several other combinations which also failed.
== 27. Review baseline, GMOC, and monitoring statistics ==
Initial plan for this step was to review the slice monitoring data at [https://gmoc-db.grnoc.iu.edu/protected-openid/index.pl?method=slices GMOC DB] location, but after discussion with ExoGENI team, this step is being modified to use Iperf to determine statistics for the experimenter.
__Iperf Run-1__
As Experimenter1 (lnevers), ran Iperf from the BBN host to the RENCI host in Experiment 1, with other 2 experiments (2&3) idle, with these results:
{{{
root@debian:~# iperf -c 10.42.19.25
------------------------------------------------------------
Client connecting to 10.42.19.25, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.42.19.27 port 36977 connected with 10.42.19.25 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.1 sec 5.77 MBytes 4.81 Mbits/sec
}}}
__Iperf Run-2__
As Experimenter2 (lnevers), ran Iperf concurrently from the each of the two BBN hosts to the two RENCI hosts in Experiment 2, with other 2 experiments (1 & 3) idle, with these results on the first BBN host:
{{{
root@debian:~# iperf -c 10.42.18.15
------------------------------------------------------------
Client connecting to 10.42.18.15, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.42.18.98 port 42409 connected with 10.42.18.15 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 5.83 MBytes 4.87 Mbits/sec
}}}
and on the second BBN host:
{{{
root@debian:~# iperf -c 10.42.18.16
------------------------------------------------------------
Client connecting to 10.42.18.16, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.42.18.77 port 59549 connected with 10.42.18.16 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.1 sec 5.83 MBytes 4.86 Mbits/sec
}}}
__Iperf Run-3__
Combined all Iperf traffic from Run-1+Run-2, and ran all 3 client/server combinations concurrently.
Results for Experiment1 BBN Host1:
{{{
# iperf -c 10.42.19.25
------------------------------------------------------------
Client connecting to 10.42.19.25, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.42.19.27 port 36979 connected with 10.42.19.25 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.1 sec 5.70 MBytes 4.72 Mbits/sec
}}}
Results from Experiment2 Host1:
{{{
# iperf -c 10.42.18.15
------------------------------------------------------------
Client connecting to 10.42.18.15, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.42.18.98 port 42410 connected with 10.42.18.15 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 5.82 MBytes 4.88 Mbits/sec
}}}
Results from Experiment2 Host2:
{{{
root@debian:~# iperf -c 10.42.18.16
------------------------------------------------------------
Client connecting to 10.42.18.16, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.42.18.77 port 59550 connected with 10.42.18.16 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 5.90 MBytes 4.94 Mbits/sec
}}}
== 28. As site administrator, identify all controllers that the BBN ExoGENI !OpenFlow switch is connected to ==
An experimenter does not have site administrator privileges to identify all OpenFlow controllers that have access to the BBN ExoGENI !OpenFlow Switch. As the Administrator, get a list of active slivers on the FOAM controller which runs on the BBN Head node in the ExoGENI rack:
{{{
$ foamctl geni:list-slivers --passwd-file=/opt/foam/etc/foampasswd
{
"slivers": [
{
"status": "Approved",
"sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp1:21095873-0df9-4254-ba15-9af4e817d3a2",
"creation": "2012-08-14 22:00:31.138738+00:00",
"pend_reason": "Request has underspecified VLAN requests",
"expiration": "2012-08-30 00:00:00+00:00",
"deleted": "False",
"user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+lnevers",
"slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp1",
"enabled": true,
"email": "lnevers@bbn.com",
"flowvisor_slice": "21095873-0df9-4254-ba15-9af4e817d3a2",
"desc": "EG-EXP-5-scenario1 resources at BBN ExoGENI.",
"ref": null,
"id": 34,
"uuid": "21095873-0df9-4254-ba15-9af4e817d3a2"
},
{
"status": "Approved",
"sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp2:4a1d909c-b0c7-45a7-b100-01e0b1d8bd3a",
"creation": "2012-08-14 22:05:36.797393+00:00",
"pend_reason": "Request has underspecified VLAN requests",
"expiration": "2012-08-22 00:00:00+00:00",
"deleted": "False",
"user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+lnevers1",
"slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp2",
"enabled": true,
"email": "lnevers@bbn.com",
"flowvisor_slice": "4a1d909c-b0c7-45a7-b100-01e0b1d8bd3a",
"desc": "EG-EXP-5-scenario1 resources at BBN ExoGENI.",
"ref": null,
"id": 35,
"uuid": "4a1d909c-b0c7-45a7-b100-01e0b1d8bd3a"
},
{
"status": "Approved",
"sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp3:f08d3095-1c80-4d13-bb55-77fe60cc2743",
"creation": "2012-09-12 15:51:56.969258+00:00",
"pend_reason": "Request has underspecified VLAN requests",
"expiration": "2012-09-26 00:00:00+00:00",
"deleted": "False",
"user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+lnevers2",
"slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp3",
"enabled": true,
"email": "lnevers@bbn.com",
"flowvisor_slice": "f08d3095-1c80-4d13-bb55-77fe60cc2743",
"desc": "EG-EXP-3 experiment 3 resources at BBN ExoGENI.",
"ref": null,
"id": 41,
"uuid": "f08d3095-1c80-4d13-bb55-77fe60cc2743"
}
]
}
}}}
To get information about which !OpenFlow controllers are in use, show the details for each of the slivers in this test case. The controller for EG-EXP-exp1 can be seen in the ''url'' below:
{{{
$ foamctl geni:show-sliver -u "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp1:21095873-0df9-4254-ba15-9af4e817d3a2" --passwd-file=/opt/foam/etc/foampasswd
{
"sliver": {
"flowspace rules": 2,
"status": "Approved",
"creation": "2012-08-14 22:00:31.138738+00:00",
"uuid": "21095873-0df9-4254-ba15-9af4e817d3a2",
"deleted": "False",
"user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+lnevers",
"slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp1",
"enabled": true,
"pend_reason": "Request has underspecified VLAN requests",
"email": "lnevers@bbn.com",
"controllers": [
{
"url": "tcp:mallorea.gpolab.bbn.com:33017",
"type": "primary"
}
],
"expiration": "2012-08-30 00:00:00+00:00",
"desc": "EG-EXP-5-scenario1 resources at BBN ExoGENI.",
"sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp1:21095873-0df9-4254-ba15-9af4e817d3a2",
"ref": null,
"id": 34,
"flowvisor_slice": "21095873-0df9-4254-ba15-9af4e817d3a2"
}
}
}}}
The controller for EG-EXP-exp2 can be seen in the ''url'' below:
{{{
$ foamctl geni:show-sliver -u "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp2:4a1d909c-b0c7-45a7-b100-01e0b1d8bd3a" --passwd-file=/opt/foam/etc/foampasswd
{
"sliver": {
"flowspace rules": 2,
"status": "Approved",
"creation": "2012-08-14 22:05:36.797393+00:00",
"uuid": "4a1d909c-b0c7-45a7-b100-01e0b1d8bd3a",
"deleted": "False",
"user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+lnevers1",
"slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp2",
"enabled": true,
"pend_reason": "Request has underspecified VLAN requests",
"email": "lnevers@bbn.com",
"controllers": [
{
"url": "tcp:mallorea.gpolab.bbn.com:33018",
"type": "primary"
}
],
"expiration": "2012-08-22 00:00:00+00:00",
"desc": "EG-EXP-5-scenario1 resources at BBN ExoGENI.",
"sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp2:4a1d909c-b0c7-45a7-b100-01e0b1d8bd3a",
"ref": null,
"id": 35,
"flowvisor_slice": "4a1d909c-b0c7-45a7-b100-01e0b1d8bd3a"
}
}
}}}
The controller for EG-EXP-exp3 can be seen in the ''url'' below:
{{{
$ foamctl geni:show-sliver -u "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp3:f08d3095-1c80-4d13-bb55-77fe60cc2743" --passwd-file=/opt/foam/etc/foampasswd
{
"sliver": {
"flowspace rules": 2,
"status": "Approved",
"creation": "2012-09-12 15:51:56.969258+00:00",
"uuid": "f08d3095-1c80-4d13-bb55-77fe60cc2743",
"deleted": "False",
"user": "urn:publicid:IDN+pgeni.gpolab.bbn.com+user+lnevers2",
"slice_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp3",
"enabled": true,
"pend_reason": "Request has underspecified VLAN requests",
"email": "lnevers@bbn.com",
"controllers": [
{
"url": "tcp:mallorea.gpolab.bbn.com:33020",
"type": "primary"
}
],
"expiration": "2012-09-26 00:00:00+00:00",
"desc": "EG-EXP-3 experiment 3 resources at BBN ExoGENI.",
"sliver_urn": "urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+EG-EXP-6-exp3:f08d3095-1c80-4d13-bb55-77fe60cc2743",
"ref": null,
"id": 41,
"flowvisor_slice": "f08d3095-1c80-4d13-bb55-77fe60cc2743"
}
}
}}}
As an experimenter, it is possible to identify that the appropriate switches for the experiment on this page are connected to the !OpenFlow controllers used in this test case.
__EG-EXP-6-exp1__
Based on the RSpecs the following !OpenFlow controller and ports are requested for EG-EXP-6-exp1:
{{{
}}}
On the system mallorea.gpolab.bbn.com the NOX controller is running and listening on port 33017 and allowing console connections on port 11017:
{{{
$ ./nox_core --info=$HOME/nox-33017.info -i ptcp:33017 switch lavi_switches lavi_swlinks jsonmessenger=tcpport=11017,sslport=0
}}}
Verified the switches connected to the controller for EG-EXP-6-exp1 by using the nox console script to get a list of switches connected to the nox_core listening to port 33017:
{{{
$ ./nox-console -n localhost -p 11017 getnodes | sort
00:00:00:10:10:17:50:01
00:64:08:17:f4:b3:5b:00
00:64:08:17:f4:b5:2a:00
06:d6:00:12:e2:b8:a5:d0
06:d6:00:24:a8:5d:0b:00
06:d6:00:24:a8:d2:b8:40
0e:84:00:23:47:c8:bc:00
0e:84:00:23:47:ca:bc:40
0e:84:00:24:a8:d2:48:00
0e:84:00:24:a8:d2:b8:40
0e:84:00:26:f1:40:a8:00
}}}
In the above list of connections, ''00:64:08:17:f4:b5:2a:00'' is the BBN ExoGENI OpenFlow Switch
and ''00:64:08:17:f4:b3:5b:00'' is the RENCI ExoGENI OpenFlow Switch.
''Note'': In later updates, the BBN ExoGENI switch DPID was modified to "00:01:08:17:f4:b5:2a:00"
and the RENCI ExoGENI switch DPID was modified to "00:01:08:17:f4:b3:5b:00"
__EG-EXP-6-exp2__
Based on the RSpecs the following controller and ports are requested for EG-EXP-6-exp2:
{{{
}}}
On the system mallorea.gpolab.bbn.com the NOX controller is running and listening on port 33018 and allowing console connections on port 11018:
{{{
$ ./nox_core --info=$HOME/nox-33018.info -i ptcp:33018 switch lavi_switches lavi_swlinks jsonmessenger=tcpport=11018,sslport=0
}}}
Verified the switches connected to the controller for EG-EXP-6-exp2 by using the nox console to get a list of switches connected:
{{{
$ ./nox-console -n localhost -p 11018 getnodes
00:64:08:17:f4:b3:5b:00
00:64:08:17:f4:b5:2a:00
06:d6:00:12:e2:b8:a5:d0
06:d6:00:24:a8:d2:b8:40
0e:84:00:23:47:c8:bc:00
0e:84:00:23:47:ca:bc:40
0e:84:00:24:a8:d2:48:00
0e:84:00:24:a8:d2:b8:40
0e:84:00:26:f1:40:a8:00
}}}
In the above list of connections, ''00:64:08:17:f4:b5:2a:00'' is the BBN ExoGENI OpenFlow Switch
and ''00:64:08:17:f4:b3:5b:00'' is the RENCI ExoGENI OpenFlow Switch.
''Note'': In later updates, the BBN ExoGENI switch DPID was modified to "00:01:08:17:f4:b5:2a:00"
and the RENCI ExoGENI switch DPID was modified to "00:01:08:17:f4:b3:5b:00"
__EG-EXP-6-exp3__
Based on the RSpecs the following controller and ports are requested for EG-EXP-6-exp3:
{{{
}}}
On the system mallorea.gpolab.bbn.com the NOX controller is running and listening on port 33020 and allowing console connections on port 11020:
{{{
$ ./nox_core --info=$HOME/nox-33020.info -i ptcp:33020 switch lavi_switches lavi_swlinks jsonmessenger=tcpport=11020,sslport=0
}}}
Verified the switches for EG-EXP-6-exp3 by using the nox console to get a list of switches connected:
{{{
$ ./nox-console -n localhost -p 11020 getnodes
06:d6:00:24:a8:c4:b9:00
06:d6:00:12:e2:b8:a5:d0
00:00:0e:84:40:39:19:96
00:00:0e:84:40:39:18:58
00:64:08:17:f4:b5:2a:00
00:00:0e:84:40:39:1b:93
00:00:0e:84:40:39:1a:57
00:00:0e:84:40:39:18:1b
}}}
In the above list of connections, ''00:64:08:17:f4:b5:2a:00'' is the BBN ExoGENI OpenFlow Switch
and ''00:64:08:17:f4:b3:5b:00'' is the RENCI ExoGENI OpenFlow Switch.
''Note'': In later updates, the BBN ExoGENI switch DPID was modified to "00:01:08:17:f4:b5:2a:00"
and the RENCI ExoGENI switch DPID was modified to "00:01:08:17:f4:b3:5b:00"
== 29. As Experimenter3, verify that traffic only flows on the network resources assigned to slivers as specified by the controller ==
From Experimenter 3 host attempted to connect to Experimenter 2 host:
{{{
$ ssh 192.1.242.9 -l root
root@debian:~# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 52:54:00:e6:5e:1a
inet addr:10.42.11.198 Bcast:10.42.255.255 Mask:255.255.0.0
inet6 addr: fe80::5054:ff:fee6:5e1a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2668 errors:0 dropped:0 overruns:0 frame:0
TX packets:731 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:167664 (163.7 KiB) TX bytes:30918 (30.1 KiB)
root@debian:~# ping 10.42.18.15
PING 10.42.18.15 (10.42.18.15) 56(84) bytes of data.
From 10.42.11.198 icmp_seq=2 Destination Host Unreachable
From 10.42.11.198 icmp_seq=3 Destination Host Unreachable
From 10.42.11.198 icmp_seq=4 Destination Host Unreachable
}}}
== 30. Verify control access to OF experiment ==
Verify that no default controller, switch fail-open behavior, or other resource other than experimenters' controllers, can control how traffic flows on network resources assigned to experimenters' slivers.
The following scenarios were verified:
* Traffic is not exchanged when the controller is not running.
* Starting controller allows existing traffic flows to be delivered.
* Stopping the controller does not stop an existing continuous traffic exchange.
* Stopping the controller and starting a flow within the default timeout (5 sec) allow traffic delivery.
* Stopping the controller and starting a flow after the default timeout (5 sec) does not allow traffic delivery..
== 31. Set the hard and soft timeout of flowtable entries ==
The flow timeout scenarios were verified by modifying the "idle_timeout" from "0" to "15" seconds and modifying the "hard_timeout" from "0" to 40 seconds in the file src/nox/coreapps/switch/switch.cc:
* Stopping the controller and starting a flow within the "hard_timeout" (15 sec) allow traffic delivery.
* Stopping the controller and starting a flow after the "hard_timeout" (40 sec) does not allow traffic delivery.
== 32. Get switch statistics and flowtable entries for slivers from the OpenFlow switch. ==
Statistics can be collected by experimenters and by administrator. In this step verified that both are possible.
__Statistics available to Experimenters__
In this step the !FloodLight Controller is used to capture statistics rather than the NOX Controller as shown in earlier steps. The Floodlight controller was configured to run on port 33020. The following is a list of switches associated with floodlight that is running as a controller for EG-EXP-6-exp3:
{{{
$ curl http://localhost:9090/wm/core/controller/switches/json
[{"dpid":"00:00:0e:84:40:39:18:1b"},{"dpid":"06:d6:00:24:a8:c4:b9:00"},
{"dpid":"00:00:0e:84:40:39:19:96"},{"dpid":"00:00:0e:84:40:39:1b:93"},
{"dpid":"00:00:0e:84:40:39:18:58"},{"dpid":"00:00:0e:84:40:39:1a:57"},
{"dpid":"00:01:08:17:f4:b5:2a:00"},{"dpid":"06:d6:00:12:e2:b8:a5:d0"},
{"dpid":"00:00:00:10:10:17:50:01"}]
}}}
Note: The ExoGENI DPID is "00:01:08:17:f4:b5:2a:00"
These are switch statistics for the ExoGENI Switch, note that ports showing no statistics were omitted to simplify output captured:
{{{
$ curl http://localhost:9090/wm/core/switch/00:01:08:17:f4:b5:2a:00/port/json
{"00:01:08:17:f4:b5:2a:00":
{"portNumber":17,"receivePackets":7,"transmitPackets":326500,"receiveBytes":606,"transmitBytes":34230753,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":18,"receivePackets":15,"transmitPackets":326407,"receiveBytes":1286,"transmitBytes":34217197,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":19,"receivePackets":14,"transmitPackets":326500,"receiveBytes":1212,"transmitBytes":34230753,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":20,"receivePackets":8,"transmitPackets":326498,"receiveBytes":680,"transmitBytes":34230413,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":21,"receivePackets":57196,"transmitPackets":323711,"receiveBytes":6005453,"transmitBytes":33751053,"receiveDropped":1,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":22,"receivePackets":57198,"transmitPackets":323714,"receiveBytes":6005686,"transmitBytes":33751567,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":23,"receivePackets":57195,"transmitPackets":323712,"receiveBytes":6005348,"transmitBytes":33751225,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":24,"receivePackets":57192,"transmitPackets":323713,"receiveBytes":6005056,"transmitBytes":33751397,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":41,"receivePackets":24229,"transmitPackets":369920,"receiveBytes":1914282,"transmitBytes":37750317,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":42,"receivePackets":1879820,"transmitPackets":1185362,"receiveBytes":2488532529,"transmitBytes":110737662,"receiveDropped":1277,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":43,"receivePackets":75312,"transmitPackets":422827,"receiveBytes":6353578,"transmitBytes":76158016,"receiveDropped":154,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":44,"receivePackets":83339,"transmitPackets":374259,"receiveBytes":6584290,"transmitBytes":38101405,"receiveDropped":4,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":45,"receivePackets":150358,"transmitPackets":403230,"receiveBytes":113527578,"transmitBytes":40223411,"receiveDropped":1,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":46,"receivePackets":102652,"transmitPackets":373035,"receiveBytes":9596824,"transmitBytes":37749175,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":47,"receivePackets":175763,"transmitPackets":344545,"receiveBytes":15371886,"transmitBytes":35446008,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":48,"receivePackets":67959,"transmitPackets":369045,"receiveBytes":6855790,"transmitBytes":37425633,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":60,"receivePackets":26490,"transmitPackets":350294,"receiveBytes":2729714,"transmitBytes":36778537,"receiveDropped":0,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0},
{"portNumber":64,"receivePackets":2061989,"transmitPackets":2183183,"receiveBytes":204534064,"transmitBytes":2588610372,"receiveDropped":3,"transmitDropped":0,"receiveErrors":0,"transmitErrors":0,"receiveFrameErrors":-1,"receiveOverrunErrors":-1,"receiveCRCErrors":0,"collisions":0}]}
}}}
Statics for ports '42' and '64' are of interest as shown by the details in the flow tables for the ExoGENI OF Switch.
The flows between the 2 nodes 10.42.11.209 (pc9.pgeni.gpolab.bbn.com) and the address 10.42.11.198 *ExoGENI VM on shared VLAN 1750)
are shown in this lists of flows on the ExoGENI switch:
{{{
lnevers@mallorea:~$ curl http://localhost:9090/wm/core/switch/00:01:08:17:f4:b5:2a:00/flow/json
{"00:01:08:17:f4:b5:2a:00":
[{"cookie":9007199254740992,"idleTimeout":5,"hardTimeout":0, "match":{"dataLayerDestination":"00:15:17:f4:31:aa",
"dataLayerSource":"52:54:00:3c:c2:a2","dataLayerType":"0x0800","dataLayerVirtualLan":1750,
"dataLayerVirtualLanPriorityCodePoint":0,"inputPort":42,"networkDestination":"10.42.11.209",
"networkDestinationMaskLen":32,"networkProtocol":0, "networkSource":"10.42.11.198","networkSourceMaskLen":32,
"networkTypeOfService":0,"transportDestination":0,"transportSource":0,"wildcards":3145952},
"durationSeconds":1081,"durationNanoseconds":0,"packetCount":2154, "byteCount":228324,"tableId":0,
"actions":[{"maxLength":0,"port":64,"lengthU":8,"length":8,"type":"OUTPUT"}],"priority":0},
{"cookie":9007199254740992,"idleTimeout":5,"hardTimeout":0,"match":{"dataLayerDestination":"52:54:00:3c:c2:a2",
"dataLayerSource":"00:15:17:f4:31:aa","dataLayerType":"0x0800",
"dataLayerVirtualLan":1750,"dataLayerVirtualLanPriorityCodePoint":0,"inputPort":64,"networkDestination":"10.42.11.198",
"networkDestinationMaskLen":32,"networkProtocol":0,"networkSource":"10.42.11.209","networkSourceMaskLen":32,
"networkTypeOfService":0,"transportDestination":0,"transportSource":0,"wildcards":3145952},"durationSeconds":1081,
"durationNanoseconds":0, "packetCount":2152,"byteCount":228112,"tableId":0,"actions":[{"maxLength":0,"port":42,
"lengthU":8,"length":8,"type":"OUTPUT"}],"priority":0}]}
}}}
Also verified memory usage:
{{{
$ curl http://localhost:9090/wm/core/memory/json
{"total":34148352,"free":12270464}
}}}
__Statistics available to Administrators__
The head node runs the !FlowVisor for the !OpenFlow switch in the ExoGENI rack. To access switch and slice statistics a login on head node in the ExoGENI rack is required, this is not normally available to experimenters. This scenarios was executed using NOX as a controller for the slice EG-EXP-6-exp3.
Determined how many slices were running according to !FlowVisor:
{{{
[lnevers@bbn-hn ~]$ /opt/flowvisor/bin/fvctl --passwd-file=/opt/flowvisor/etc/flowvisor/fvpasswd listSlices
Slice 0: f08d3095-1c80-4d13-bb55-77fe60cc2743
Slice 1: 21095873-0df9-4254-ba15-9af4e817d3a2
Slice 2: fvadmin
Slice 3: 4a1d909c-b0c7-45a7-b100-01e0b1d8bd3a
Slice 4: 8aad0aae-ae92-4a3c-bd5e-43f7456f628e
Slice 5: 013f6aa7-e600-4be5-9e31-5c0436223dfd
Slice 6: e10d67f9-4680-4774-9968-aae42c8fdccb
}}}
In this example, we will be looking for the !FlowVisor Slice associated with EG-EXP-6-exp3. So we have to show the slice information for each of the above to determine which is one that maps to EG-EXP-6-exp3.
{{{
[lnevers@bbn-hn ~]$ /opt/flowvisor/bin/fvctl --passwd-file=/opt/flowvisor/etc/flowvisor/fvpasswd getSliceInfo f08d3095-1c80-4d13-bb55-77fe60cc2743
Got reply:
connection_1=00:01:08:17:f4:b5:2a:00-->/192.1.242.3:47453-->mallorea.gpolab.bbn.com/192.1.249.185:33020
contact_email=lnevers@bbn.com
controller_hostname=mallorea.gpolab.bbn.com
controller_port=33020
creator=fvadmin
}}}
The Experiment EG-EXP-6-exp-3 uses the controller mallorea.gpolab.bbn.com on port 33020 in our OpenFlow RSpec
[http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/EG-EXP-6-exp3-openflow-exobbn.rspec EG-EXP-6-exp3-openflow-exobbn.rspec] for the ExoGENI FOAM.
Now that we have identified the slice, we can get statistics for it:
{{{
[lnevers@bbn-hn ~]$ /opt/flowvisor/bin/fvctl --passwd-file=/opt/flowvisor/etc/flowvisor/fvpasswd getSliceStats f08d3095-1c80-4d13-bb55-77fe60cc2743
Got reply:
---Sent---
slicer_f08d3095-1c80-4d13-bb55-77fe60cc2743_dpid=00:01:08:17:f4:b5:2a:00 :: ECHO_REPLY=791,FEATURES_REQUEST=10,PACKET_IN=312398,PACKET_OUT=3403704,ECHO_REQUEST=791,FLOW_MOD=4292,ERROR=20,FEATURES_REPLY=10,HELLO=20,SET_CONFIG=10,FLOW_REMOVED=474,VENDOR=10
Total :: ECHO_REPLY=791,FEATURES_REQUEST=10,PACKET_IN=312398,PACKET_OUT=3403704,ECHO_REQUEST=791,FLOW_MOD=4292,ERROR=20,FEATURES_REPLY=10,HELLO=20,SET_CONFIG=10,FLOW_REMOVED=474,VENDOR=10
---Recv---
slicer_f08d3095-1c80-4d13-bb55-77fe60cc2743_dpid=00:01:08:17:f4:b5:2a:00 :: ECHO_REPLY=791,FLOW_MOD=4292,FEATURES_REQUEST=10,HELLO=10,SET_CONFIG=10,PACKET_OUT=3403704,VENDOR=10
Total :: ECHO_REPLY=791,FLOW_MOD=4292,FEATURES_REQUEST=10,HELLO=10,SET_CONFIG=10,PACKET_OUT=3403704,VENDOR=10
---Drop---
classifier-dpid=00:01:08:17:f4:b5:2a:00 :: FLOW_REMOVED=25
slicer_f08d3095-1c80-4d13-bb55-77fe60cc2743_dpid=00:01:08:17:f4:b5:2a:00 :: ECHO_REQUEST=2
Total :: ECHO_REQUEST=2,FLOW_REMOVED=25
}}}
Determine the switch specific information, by first listing the devices and then the detailed information about them:
{{{
[lnevers@bbn-hn ~]$ /opt/flowvisor/bin/fvctl --passwd-file=/opt/flowvisor/etc/flowvisor/fvpasswd listDevices
Device 0: 00:01:08:17:f4:b5:2a:00
[lnevers@bbn-hn ~]$ /opt/flowvisor/bin/fvctl --passwd-file=/opt/flowvisor/etc/flowvisor/fvpasswd getDeviceInfo 00:01:08:17:f4:b5:2a:00
nPorts=51
portList=1,5,9,13,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,64
dpid=00:01:08:17:f4:b5:2a:00
remote=/192.168.103.10:6633-->/192.168.103.4:64431
portNames=1(1),5(5),9(9),13(13),17(17),18(18),19(19),20(20),21(21),22(22),23(23),24(24),25(25),26(26),27(27),28(28),29(29),30(30),31(31),32(32),33(33),34(34),35(35),36(36),37(37),38(38),39(39),40(40),41(41),42(42),43(43),44(44),45(45),46(46),47(47),48(48),49(49),50(50),51(51),52(52),53(53),54(54),55(55),56(56),57(57),58(58),59(59),60(60),61(61),62(62),64(64)
}}}
To show statistics for the one !OpenFlow device in the ExoGENI Rack:
{{{
[lnevers@bbn-hn ~]$ /opt/flowvisor/bin/fvctl --passwd-file=/opt/flowvisor/etc/flowvisor/fvpasswd getSwitchStats 00:01:08:17:f4:b5:2a:00
Got reply:
---Sent---
classifier-dpid=00:01:08:17:f4:b5:2a:00 :: ECHO_REQUEST=146870,ECHO_REPLY=24472,FLOW_MOD=27784,FEATURES_REQUEST=25,STATS_REQUEST.DESC=11,GET_CONFIG_REQUEST=10,HELLO=1,SET_CONFIG=23,PACKET_OUT=7537686,VENDOR=13
Total :: ECHO_REQUEST=146870,ECHO_REPLY=24472,FLOW_MOD=27784,FEATURES_REQUEST=25,STATS_REQUEST.DESC=11,GET_CONFIG_REQUEST=10,HELLO=1,SET_CONFIG=23,PACKET_OUT=7537686,VENDOR=13
---Recv---
classifier-dpid=00:01:08:17:f4:b5:2a:00 :: ECHO_REQUEST=24472,ECHO_REPLY=146870,STATS_REPLY.DESC=11,ERROR=1709,PACKET_IN=994158,FEATURES_REPLY=25,GET_CONFIG_REPLY=10,HELLO=1,FLOW_REMOVED=23862
Total :: ECHO_REQUEST=24472,ECHO_REPLY=146870,STATS_REPLY.DESC=11,ERROR=1709,PACKET_IN=994158,FEATURES_REPLY=25,GET_CONFIG_REPLY=10,HELLO=1,FLOW_REMOVED=23862
---Drop---
Total ::
}}}
To show further topology information, used access to the head node to run !FlowVisor for the !OpenFlow switch in the ExoGENI rack. Note that ExoGENI head node access is not normally available to experimenters. These are the FlowSpaces related to the EG-EXP-6-exp3, which uses network address 10.42.11.0:
{{{
[lnevers@bbn-hn ~]$ /opt/flowvisor/bin/fvctl --passwd-file=/opt/flowvisor/etc/flowvisor/fvpasswd listFlowSpace |egrep 10.42.11.0
rule 10: FlowEntry[dpid=[00:01:08:17:f4:b5:2a:00],ruleMatch=[OFMatch[dl_type=0x800,dl_vlan=0x6d6,nw_dst=10.42.11.0/24,nw_src=10.42.11.0/24]],actionsList=[Slice:f08d3095-1c80-4d13-bb55-77fe60cc2743=4],id=[51458425],priority=[100],]
rule 11: FlowEntry[dpid=[00:01:08:17:f4:b5:2a:00],ruleMatch=[OFMatch[dl_type=0x806,dl_vlan=0x6d6,nw_dst=10.42.11.0/24,nw_src=10.42.11.0/24]],actionsList=[Slice:f08d3095-1c80-4d13-bb55-77fe60cc2743=4],id=[51458427],priority=[100],]
}}}
Some addition information about Version and configuration:
{{{
[lnevers@bbn-hn ~]$ /opt/flowvisor/bin/fvctl --passwd-file=/opt/flowvisor/etc/flowvisor/fvpasswd getConfig 'flowvisor'
flowvisor 0 = flowvisor!api_webserver_port::INT : 8080
flowvisor 1 = flowvisor!api_jetty_webserver_port::INT : -1
flowvisor 2 = flowvisor!log_ident::STR : flowvisor
flowvisor 3 = flowvisor!checkpointing::BOOL : true
flowvisor 4 = flowvisor!listen_port::INT : 6633
flowvisor 5 = flowvisor!track_flows::BOOL : false
flowvisor 6 = flowvisor!logging::STR : NOTE
flowvisor 7 = flowvisor!stats_desc_hack::BOOL : true
flowvisor 8 = flowvisor!run_topology_server::BOOL : true
flowvisor 9 = flowvisor!log_facility::STR : LOG_LOCAL7
[lnevers@bbn-hn ~]$ /opt/flowvisor/bin/fvctl --passwd-file=/opt/flowvisor/etc/flowvisor/fvpasswd ping hello
Got reply:
PONG(fvadmin): FV version=flowvisor-0.8.1::hello
}}}
== 33. Get layer 2 topology information about slivers in each slice. ==
__Statistics available to Experimenters__
In this scenario the !FloodLight Controller is used to capture topology information. The Floodlight controller was configured to run on port 33020, in place of NOX. First we list all devices tracked by the !FloodLight controller:
{{{
$ curl http://localhost:9090/wm/device/
[{"mac":["00:0c:29:b0:74:08"],"ipv4":[],"vlan":[1750],"attachmentPoint":[{"switchDPID":"00:01:08:17:f4:b5:2a:00","errorStatus":null,"port":60}],"lastSeen":1347912254393},
{"mac": ["00:07:43:12:6e:30"],"ipv4":[],"vlan":[],"attachmentPoint":[{"switchDPID":"00:01:08:17:f4:b5:2a:00","errorStatus":null,"port":48}],"lastSeen":1347912293697},
{"mac":["00:0c:29:b0:74:08"],"ipv4":["10.42.11.23"],"vlan":[],"attachmentPoint":[],"lastSeen":1347912254389},
{"mac":["00:07:43:12:6f:69"],"ipv4":[],"vlan":[],"attachmentPoint":[{"switchDPID":"00:01:08:17:f4:b5:2a:00","errorStatus":null,"port":22}],"lastSeen":1347912293450},
{"mac":["00:07:43:12:6e:39"],"ipv4":[],"vlan":[],"attachmentPoint":[{"switchDPID":"00:01:08:17:f4:b5:2a:00","errorStatus":null,"port":24}],"lastSeen":1347912293697},
{"mac":["00:15:17:f4:31:aa"],"ipv4":[],"vlan":[],"attachmentPoint":[{"switchDPID":"06:d6:00:24:a8:c4:b9:00","errorStatus":null,"port":33}],"lastSeen":1347912221496},
{"mac":["00:07:43:12:5c:f0"],"ipv4":[],"vlan":[],"attachmentPoint":[{"switchDPID":"00:01:08:17:f4:b5:2a:00","errorStatus":null,"port":47}],"lastSeen":1347912293811},
{"mac":["00:07:43:12:5c:f9"],"ipv4":[],"vlan":[],"attachmentPoint":[{"switchDPID":"00:01:08:17:f4:b5:2a:00","errorStatus":null,"port":23}],"lastSeen":1347912293811},
{"mac":["52:54:00:3c:c2:a2"],"ipv4":["10.42.11.198"],"vlan":[1750],"attachmentPoint":[{"switchDPID":"00:01:08:17:f4:b5:2a:00","errorStatus":null,"port":42}],"lastSeen":1347912254388},
{"mac":["00:07:43:12:5b:20"],"ipv4":[],"vlan":[],"attachmentPoint":[{"switchDPID":"00:01:08:17:f4:b5:2a:00","errorStatus":null,"port":45}],"lastSeen":1347912294368},
{"mac":["00:15:17:f4:31:aa"],"ipv4":["10.42.11.209"],"vlan":[1750],"attachmentPoint":[],"lastSeen":1347912221515},
{"mac":["52:54:00:3c:c2:a2"],"ipv4":[],"vlan":[],"attachmentPoint":[],"lastSeen":1347912221488},
{"mac":["00:07:43:12:5b:29"],"ipv4":[],"vlan":[],"attachmentPoint":[{"switchDPID":"00:01:08:17:f4:b5:2a:00","errorStatus":null,"port":21}],"lastSeen":1347912294368},
{"mac":["00:07:43:12:6f:60"],"ipv4":[],"vlan":[],"attachmentPoint":[{"switchDPID":"00:01:08:17:f4:b5:2a:00","errorStatus":null,"port":46}],"lastSeen":1347912293449}]
}}}
In the capture above the address 10.42.11.209 belongs to the node pc9.pgeni.gpolab.bbn.com and the address 10.42.11.198 belongs to the VM node reserved in the ExoGENI Rack on the shared VLAN 1750.
Now some topology information about the inter-switch links:
{{{
$ curl http://localhost:9090/wm/topology/links/json
[{"dst-port":1,"dst-switch":"00:00:0e:84:40:39:1b:93","src-port":2,"src-switch":"00:00:0e:84:40:39:1a:57","type":"DIRECT_LINK"},
{"dst-port":1,"dst-switch":"00:00:0e:84:40:39:19:96","src-port":3,"src-switch":"00:00:0e:84:40:39:18:58","type":"DIRECT_LINK"},
{"dst-port":71,"dst-switch":"06:d6:00:24:a8:c4:b9:00","src-port":20,"src-switch":"06:d6:00:12:e2:b8:a5:d0","type":"DIRECT_LINK"},
{"dst-port":20,"dst-switch":"06:d6:00:12:e2:b8:a5:d0","src-port":71,"src-switch":"06:d6:00:24:a8:c4:b9:00","type":"DIRECT_LINK"},
{"dst-port":2,"dst-switch":"00:00:0e:84:40:39:18:1b","src-port":2,"src-switch":"00:00:0e:84:40:39:1b:93","type":"DIRECT_LINK"},
{"dst-port":2,"dst-switch":"00:00:0e:84:40:39:1b:93","src-port":2,"src-switch":"00:00:0e:84:40:39:18:1b","type":"DIRECT_LINK"},
{"dst-port":2,"dst-switch":"00:00:0e:84:40:39:1a:57","src-port":1,"src-switch":"00:00:0e:84:40:39:1b:93","type":"DIRECT_LINK"},
{"dst-port":3,"dst-switch":"00:00:0e:84:40:39:18:58","src-port":1,"src-switch":"00:00:0e:84:40:39:19:96","type":"DIRECT_LINK"},
{"dst-port":3,"dst-switch":"00:00:0e:84:40:39:18:1b","src-port":2,"src-switch":"00:00:0e:84:40:39:18:58","type":"DIRECT_LINK"},
{"dst-port":2,"dst-switch":"00:00:0e:84:40:39:18:58","src-port":3,"src-switch":"00:00:0e:84:40:39:18:1b","type":"DIRECT_LINK"},
{"dst-port":64,"dst-switch":"00:01:08:17:f4:b5:2a:00","src-port":15,"src-switch":"06:d6:00:12:e2:b8:a5:d0","type":"DIRECT_LINK"}]
}}}
Note: The ExoGENI DPID is "00:01:08:17:f4:b5:2a:00"
== 34. Install flows that match on layer 2 fields and/or layer 3 fields. ==
This step was executed with a !FloodLight controller on EG-EXP-6-exp3. Static Flows can be installed on a switch with the !FloodLight Static Flow Pusher which allows a user to manually insert flows into an !OpenFlow network. To enable this feature, the Forwarding modules must be removed from the floodlight.properties file and !FloodLight must be recompiled. Using !FloodLight Static Flow Pusher verified the existing list of static list of flow is empty:
{{{
$ curl http://localhost:9090/wm/staticflowentrypusher/list/00:01:08:17:f4:b5:2a:00/json
{"00:01:08:17:f4:b5:2a:00":null}
}}}
Pushed a new flow to the switch.. (TO determine correct command.)
{{{
$ curl -d '{"switch": "00:01:08:17:f4:b5:2a:00", "name":"flow-mod-1", "cookie":"0", "priority":"32768", "inputPort":43,"networkDestination":"10.42.11.209", "active":"true"}' http://localhost:9090/wm/staticflowentrypusher/json
{"status" : "Entry pushed"}
$
}}}
== 35. Run test for at least 4 hours ==
== 36. Review monitoring statistics and checks as above ==
Initial plan for this step was to review the slice monitoring data at [https://gmoc-db.grnoc.iu.edu/protected-openid/index.pl?method=slices GMOC DB] location, but after discussion with ExoGENI team, this step is being modified to use Iperf to determine statistics for the experimenter.
First checked performance for the nodes in EG-EXP-6-exp3, endpoints are one ExoGENI VM and one GPO ProtoGENI meso-scale node (pc9), following are the results reported on the ExoGENI iperf server:
{{{
root@debian:~iperf -c 10.42.11.209
------------------------------------------------------------
Client connecting to 10.42.11.209, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.42.11.198 port 49713 connected with 10.42.11.209 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.08 GBytes 930 Mbits/sec
}}}
These are the results from the client iperf running on the GPO ProtoGENI node pc9:
{{{
vm:~> iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 10.42.11.209 port 5001 connected with 10.42.11.198 port 49713
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.0 sec 1.08 GBytes 930 Mbits/sec
}}}
== 37. Stop traffic and delete slivers ==