| 146 | | == 13. Define request RSpecs for !OpenFlow core resources at NLR FOAM. == |
| 147 | | 14. Create a second slice. |
| 148 | | 15. Create a sliver in the second slice at each AM, using the RSpecs defined above. |
| 149 | | 16. Log in to each of the systems in the slice, and send traffic to each other systems; leave traffic running |
| 150 | | 17. As Experimenter3, request !ListResources from BBN ExoGENI, GPO FOAM, and FOAM at Meso-scale Site (NLR Site GPO and Internet2 site TBD). |
| 151 | | 18. Review !ListResources output from all AMs. |
| 152 | | 19. Define a request RSpec for a VM at the BBN ExoGENI. |
| 153 | | 20. Define a request RSpec for a compute resource at the GPO Meso-scale site. |
| 154 | | 21. Define a request RSpec for a compute resource at a Meso-scale site. |
| 155 | | 22. Define request RSpecs for !OpenFlow resources to allow connection from OF BBN ExoGENI to Meso-scale OF sites(GPO and second site TBD) (NLR and I2). |
| 156 | | 23. Create a third slice. |
| 157 | | 24. Create a sliver that connects the Internet2 Meso-scale !OpenFlow site to the BBN ExoGENI Site, and the GPO Meso-scale site. |
| 158 | | 25. Log in to each of the compute resources in the slice, configure data plane network interfaces on any non-ExoGENI resources as necessary, and send traffic to each other systems; leave traffic running. |
| 159 | | 26. Verify that all three experiments continue to run without impacting each other's traffic, and that data is exchanged over the path along which data is supposed to flow. |
| 160 | | 27. Review baseline, GMOC, and monitoring statistics. |
| 161 | | 28. As site administrator, identify all controllers that the BBN ExoGENI !OpenFlow switch is connected to |
| 162 | | 29. As Experimenter3, verify that traffic only flows on the network resources assigned to slivers as specified by the controller. |
| 163 | | 30. Verify that no default controller, switch fail-open behavior, or other resource other than experimenters' controllers, can control how traffic flows on network resources assigned to experimenters' slivers. |
| 164 | | 31. Set the hard and soft timeout of flowtable entries |
| 165 | | 32. Get switch statistics and flowtable entries for slivers from the !OpenFlow switch. |
| 166 | | 33. Get layer 2 topology information about slivers in each slice. |
| 167 | | 34. Install flows that match on layer 2 fields and/or layer 3 fields. |
| 168 | | 35. Run test for at least 4 hours. |
| 169 | | 36. Review monitoring statistics and checks as above. |
| 170 | | 37. Stop traffic and delete slivers. |
| | 146 | == 13. Define request RSpecs for !OpenFlow core resources at NLR FOAM == |
| | 147 | |
| | 148 | == 14. Create a second slice == |
| | 149 | == 15. Create a sliver in the second slice at each AM, using the RSpecs defined above == |
| | 150 | == 16. Log in to each of the systems in the slice, and send traffic to each other systems; leave traffic running |
| | 151 | == 17. As Experimenter3, request !ListResources from BBN ExoGENI, GPO FOAM, and FOAM at Meso-scale Site == |
| | 152 | |
| | 153 | == 18. Review !ListResources output from all AMs == |
| | 154 | == 19. Define a request RSpec for a VM at the BBN ExoGENI == |
| | 155 | == 20. Define a request RSpec for a compute resource at the GPO Meso-scale site == |
| | 156 | == 21. Define a request RSpec for a compute resource at a Meso-scale site == |
| | 157 | == 22. Define request RSpecs for !OpenFlow resources to allow connection from OF BBN ExoGENI to Meso-scale OF sites |
| | 158 | GPO (NLR) and Rutgers Sites (I2) == |
| | 159 | |
| | 160 | == 23. Create a third slice == |
| | 161 | |
| | 162 | == 24. Create a sliver that connects the Internet2 Meso-scale !OpenFlow site to the BBN ExoGENI Site, and the GPO Meso-scale site == |
| | 163 | |
| | 164 | == 25. Log in to each of the compute resources in the slice, and configure data plane network interfaces on any non-ExoGENI resources as necessary, and send traffic to each other systems; leave traffic running. |
| | 165 | |
| | 166 | == 26. Verify that all three experiments continue to run without impacting each other's traffic and verify that data is exchanged over the path along which data is supposed to flow == |
| | 167 | |
| | 168 | == 27. Review baseline, GMOC, and monitoring statistics == |
| | 169 | |
| | 170 | == 28. As site administrator, identify all controllers that the BBN ExoGENI !OpenFlow switch is connected to == |
| | 171 | |
| | 172 | == 29. As Experimenter3, verify that traffic only flows on the network resources assigned to slivers as specified by the controller == |
| | 173 | |
| | 174 | == 30. Verify that no default controller, switch fail-open behavior, or other resource other than experimenters' controllers, can control how traffic flows on network resources assigned to experimenters' slivers == |
| | 175 | |
| | 176 | == 31. Set the hard and soft timeout of flowtable entries == |
| | 177 | |
| | 178 | == 32. Get switch statistics and flowtable entries for slivers from the !OpenFlow switch. == |
| | 179 | |
| | 180 | == 33. Get layer 2 topology information about slivers in each slice == |
| | 181 | |
| | 182 | == 34. Install flows that match on layer 2 fields and/or layer 3 fields == |
| | 183 | |
| | 184 | == 35. Run test for at least 4 hours == |
| | 185 | |
| | 186 | == 36. Review monitoring statistics and checks as above == |
| | 187 | |
| | 188 | == 37. Stop traffic and delete slivers == |
