Changes between Version 9 and Version 10 of GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-EXP-4


Ignore:
Timestamp:
05/23/12 10:54:47 (8 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-EXP-4

    v9 v10  
    4040= Test Plan Steps =
    4141
    42 In the steps below the following nicknamesa are used:
     42In the steps below the following nicknames are used:
    4343{{{
    4444exo-bbn=,https://bbn-hn.exogeni.net:11443/orca/xmlrpc
     
    5858
    5959== Step  3. Define a request RSpec ==
    60 Define a request RSpec for a VM at BBN ExoGENI, a VM at RENCI ExoGENI and an unbound  exclusive non-!OpenFlow VLAN to connect the 2 endpoints.
     60
     61Define a request RSpec for a VM at BBN ExoGENI, a VM at RENCI ExoGENI and an unbound exclusive non-!OpenFlow VLAN to connect the 2 endpoints.
    6162
    6263== Step 4. Create the first slice. ==
    63  5. Create a sliver at the RENCI ExoGENI aggregate using the RSpecs defined above.
    64  6. Log in to each of the systems, and send traffic to the other system, leave traffic running.
    65  7. As Experimenter2, Request !ListResources from RENCI ExoGENI.
    66  8. Define a request RSpec for one VM and one bare metal node each with two interfaces in the BBN ExoGENI rack, two VMs at RENCI, and two VLANs to connect the BBN ExoGENI to the RENCI ExoGENI.
    67  9. Create a second slice.
    68  10. In the second slice, create a sliver at the RENCI ExoGENI aggregate using the RSpecs defined above.
    69  11. Log in to each of the end-point systems, and send traffic to the other end-point system which shares the same VLAN.
    70  12. Verify traffic handling per experiment, VM isolation, and MAC address assignment.
    71  13. Construct and send a non-IP ethernet packet over the data plane interface.
    72  14. Review baseline monitoring statistics.
    73  15. Run test for at least 4 hours.
    74  16. Review baseline monitoring statistics.
    75  17. Stop traffic and delete slivers.
     64
     65== Step 5. Create a sliver at the RENCI ExoGENI aggregate using the RSpecs defined above ==
     66
     67== Step 6. Log in to each of the systems, and send traffic to the other system, leave traffic running ==
     68
     69== Step 7. As Experimenter2, Request !ListResources from RENCI ExoGENI ==
     70
     71== Step 8. Define a request RSpec =
     72Full step description: "Define a request RSpec for one VM and one bare metal node each with two interfaces in the BBN ExoGENI rack, two VMs at RENCI, and two VLANs to connect the BBN ExoGENI to the RENCI ExoGENI."
     73
     74
     75== Step 9. Create a second slice  ==
     76== Step 10. In the second slice, create a sliver at the RENCI ExoGENI aggregate using the RSpecs defined above  ==
     77== Step 11. Log in to each of the end-point systems, and send traffic to the other end-point system which shares the same VLAN  ==
     78== Step 12. Verify traffic handling per experiment, VM isolation, and MAC address assignment  ==
     79== Step 13. Construct and send a non-IP ethernet packet over the data plane interface. ==
     80== Step 14. Review baseline monitoring statistics ==
     81== Step 15. Run test for at least 4 hours  ==
     82== Step 16. Review baseline monitoring statistics ==
     83== Step 17. Stop traffic and delete slivers ==