= EG-EXP-3: ExoGENI Single Site 100 VM Test = This page captures status for the test case EG-EXP-3, which verifies the ability to support 100 VM in one rack. For overall status see the [wiki:GENIRacksHome/ExogeniRacks/AcceptanceTestStatus ExoGENI Acceptance Test Status] page. = Test Status = This section captures the status for each step in the acceptance test plan. || '''Step''' || '''Status''' || '''Date completed''' ||''' Ticket ''' || '''Comments''' || || Step 1 || || || || || || Step 2 || || || || || || Step 3 || || || || || || Step 4 || || || || || || Step 5 || || || || || || Step 6 || || || || || || Step 7 || || || || || || Step 8 || || || || || || Step 9 || || || || || || Step 10 || || || || || || Step 11 || || || || || || ''Status Legend'' || ''Description '' || || || || [[Color(green,Pass)]] || Test completed and met all criteria || || [[Color( #5adefa, #100000 , Pass)]] || Test completed and met most criteria. Exceptions documented|| || [[Color(red,Fail)]] || Test completed and failed to meet criteria. || || [[Color(orange,Blocked)]] || Blocked by ticketed issue(s). || || In progress || Currently under test. || = Test Plan Steps = 1. Request !ListResources from BBN ExoGENI. 2. Review !ListResources output, and identify available resources. 3. Write a RSpec that requests 100 VMs evenly distributed across the worker nodes using the default image. 4. Create a slice. 5. Create a sliver in the slice, using the RSpec defined in step 3. 6. Log into several of the VMs, and send traffic to several other systems. 7. Step up traffic rates to verify VMs continue to operate with realistic traffic loads. 8. Review system statistics and VM isolation (does not include network isolation) 9. Review monitoring statistics and check for resource status for CPU, disk, memory utilization, interface counters, uptime, process counts, and active user counts. 8. Verify that several VMs running on the same worker node have a distinct MAC address for their interface. 9. Verify for several VMs running on the same worker node, that their MAC addresses are learned on the data plane switch. 10. Review monitoring statistics and check for resource status for CPU, disk, memory utilization, interface counters, uptime, process counts, and active user counts. 11. Stop traffic and delete sliver.