Changes between Version 27 and Version 28 of GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-EXP-3


Ignore:
Timestamp:
12/06/12 14:59:09 (11 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-EXP-3

    v27 v28  
    1010||Test 2: 4 slivers w/20VMS +2 slivers w/10 VMs||[[Color(#63B8FF,In Progress)]] || 88VMs ok, 12 VMs failed, exoticket:134 ||
    1111||Test 3: 20 slivers with 5 VMs each ||[[Color(#63B8FF,In Progress)]]           || 90VMs ok, 10 VMs failed, exoticket:134 ||
    12 ||Test 4: 100 Sliver with 1 VM       ||[[Color(#63B8FF,In Progress)]]           ||41 VMs ok, BBN SM failed, exoticket:135 ||
     12||Test 4: 100 Sliver with 1 VM       ||[[Color(#63B8FF,In Progress)]]           || 41 VMs ok, BBN SM failed, exoticket:135||
    1313||Test 5: 2 slivers with 50 VMs each ||[[Color(#63B8FF,In Progress)]]           || Allowed with current rack configuration, but untested ||
    1414
     
    3535|| Step 16    ||[[Color(#63B8FF,In Progress)]]||                  ||exoticket:134||
    3636|| Step 17    ||[[Color(#63B8FF,In Progress)]]||                  ||exoticket:135||
    37 || Step 18    ||                              ||                  ||        ||
     37|| Step 18    ||                              ||                  ||             ||
    3838
    3939
     
    162162$ omni.py createslice ln-10vm10
    163163}}}
    164 The slivers were created at the RENCI SM:
     164The following slivers were created at the RENCI SM:
    165165{{{
    166166$ omni.py createsliver -a eg-renci ln-10vm1 exo-10vm-rci.rspec
     
    181181'''Results:'''  89VMs ok, 11 VMs failed, exoticket:134
    182182
    183 In initial run no traffic was exchanged, and logins were only tried on a few nodes. Slivers were deleted upon completion.
     183''Note:'' In initial run no traffic was exchanged, and logins were only tried on a few nodes. Slivers were deleted upon completion.
    184184
    185185== Step 15. Re-execute procedure in steps 1-13 with changes required for Test 2: 4 slivers w/20VMS +2 slivers w/10 VMs ==
    186186
    187 In initial run no traffic was exchanged, and logins were only tried on a few nodes. Slivers were deleted upon completion
     187This experiment was setup at the RENCI ExoGENI rack using the RSpecs [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-3/exo-10vm-rci.rspec exo-10vm-rci.rspec] and [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-3/exo-20vm-rci.rspec exo-20vm-rci.rspec] for both RENCI SM and ExoSM.  The following slices were created:
     188{{{
     189$ omni.py createslice ln20vm1
     190$ omni.py createslice ln20vm2
     191$ omni.py createslice ln10vm1
     192}}}
     193The following slivers were created at the RENCI SM:
     194{{{
     195$ omni.py createsliver -a eg-renci ln10vm1 exo-10vm-rci.rspec
     196$ omni.py createsliver -a eg-renci ln20vm1 exo-20vm-rci.rspec
     197$ omni.py createsliver -a eg-renci ln20vm2 exo-20vm-rci.rspec
     198}}}
     199The following slivers were created at the ExoSM:
     200{{{
     201$ omni.py createsliver -a eg-sm ln10vm1 exo-10vm-rci.rspec
     202$ omni.py createsliver -a eg-sm ln20vm1 exo-20vm-rci.rspec
     203$ omni.py createsliver -a eg-sm ln20vm2 exo-20vm-rci.rspec
     204}}}
     205'''Results:''' 88 VMs successfully allocated and 12 WMs failed, exoticket:134.
     206
     207''Note:'' In initial run no traffic was exchanged, and logins were only tried on a few nodes. Slivers were deleted upon completion
    188208
    189209== Step 16. Re-execute procedure in steps 1-13 with changes required for Test 3: 20 slivers with 5 VMs each ==
    190210
    191 In initial run no traffic was exchanged, and logins were only tried on a few nodes. Slivers were deleted upon completion.
     211This experiment was setup at the RENCI ExoGENI rack using the RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-3/exo-10vm-rci.rspec exo-10vm-rci.rspec] for both RENCI SM and ExoSM.  The following slices were created:
     212{{{
     213}}}
     214The following slivers were created at the RENCI SM:
     215{{{
     216}}}
     217The following slivers were created at the ExoSM:
     218{{{
     219}}}
     220'''Results:'''
     221
     222''Note:'' In initial run no traffic was exchanged, and logins were only tried on a few nodes. Slivers were deleted upon completion.
    192223
    193224
    194225== Step 17. Re-execute procedure in steps 1-13 with changes required for Test 4: 100 Sliver with 1 VM  ==
    195 
    196 In initial run no traffic was exchanged, and logins were only tried on a few nodes. Slivers were deleted upon completion.
     226This experiment was setup at the RENCI ExoGENI rack using the RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-3/exo-10vm-rci.rspec exo-10vm-rci.rspec] for both RENCI SM and ExoSM.  The following slices were created:
     227{{{
     228}}}
     229The following slivers were created at the RENCI SM:
     230{{{
     231}}}
     232The following slivers were created at the ExoSM:
     233{{{
     234}}}
     235'''Results:'''
     236
     237''Note:'' In initial run no traffic was exchanged, and logins were only tried on a few nodes. Slivers were deleted upon completion.
    197238
    198239== Step 18. Re-execute procedure in steps 1-13 with changes required for Test 6: 2 slivers with 50 VMs each ==