Changes between Version 21 and Version 22 of GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-EXP-3


Ignore:
Timestamp:
12/06/12 13:31:59 (11 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-EXP-3

    v21 v22  
    113113
    114114== Step 6. Log into several of the VMs, and send traffic to several other systems. ==
    115  
     115Was able to login to some nodes after the slivers were ready.
     116
    116117== Step 7. Step up traffic rates to verify VMs continue to operate with realistic traffic loads. ==
    117118 
    … …  
    121122 
    122123== Step 8. Verify that several VMs running on the same worker node have a distinct MAC address for their interface. ==
     124Allocated VMs have unique MAC addresses.
    123125 
    124126== Step 9. Verify for several VMs running on the same worker node, that their MAC addresses are learned on the data plane switch. ==
    125  
     127
     128The successful exchange of traffic on the dataplane interface shows that are learned on data plane switch.
     129
    126130== Step 10. Review monitoring statistics and check for resource status for CPU, disk, memory utilization, interface counters, uptime, process counts, and active user counts. ==
    127  
     131This step is replaced by iperf for ExoGENI test cases.  Not yet completed during scalability tests.
     132
    128133== Step 11. Stop traffic and delete sliver. ==
    129  
     134Slivers are deleted as follows throughout testing:
     135{{{
     136$ omni.py deletesliver -a eg-sm EG-EXP-3
     137$ omni.py deletesliver -a eg-bbn EG-EXP-3
     138}}}
     139
     140== Step 12. Re-execute procedure in steps 1-11 with changes required for Test 1: 10 slivers with 10 VMs each ==
     141
     142== Step 13. Re-execute procedure in steps 1-11 with changes required for Test 2: 4 slivers w/20VMS +2 slivers w/10 VMs ==
     143
     144== Step 14. Re-execute procedure in steps 1-11 with changes required for Test 3: 20 slivers with 5 VMs each ==
     145
     146== Step 14. Re-execute procedure in steps 1-11 with changes required for Test 4: 100 Sliver with 1 VM  ==
     147
     148== Step 14. Re-execute procedure in steps 1-11 with changes required for Test 5: 1 slivers with 100 VMs   ==
     149
     150== Step 14. Re-execute procedure in steps 1-11 with changes required for Test 6: 2 slivers with 50 VMs each ==
     151