= EG-EXP-2: ExoGENI Single Site Acceptance Test = This page captures status for the test case EG-EXP-2, which verifies basic operations of VMs and data flows within one rack. For overall status see the [wiki:GENIRacksHome/ExogeniRacks/AcceptanceTestStatus ExoGENI Acceptance Test Status] page. = Test Status = This section captures the status for each step in the acceptance test plan. || '''Step''' || '''State''' || '''Date completed''' ||''' Ticket ''' || '''Comments''' || || Step 1 || || || || || || Step 2 || || || || || || Step 3 || || || || || || Step 4 || || || || || || Step 5 || || || || || || Step 6 || || || || || || Step 7 || || || || || || Step 8 || || || || || || Step 9 || || || || || || Step 10 || || || || || || Step 11 || || || || || || Step 12 || || || || || || Step 13 || || || || || || Step 14 || || || || || || Step 15 || || || || || || Step 16 || || || || || || Step 17 || || || || || || Step 18 || || || || || [[BR]] || '''State Legend''' || '''Description''' || || [[Color(green,Pass)]] || Test completed and met all criteria || || [[Color(#98FB98,Pass: most criteria)]] || Test completed and met most criteria. Exceptions documented || || [[Color(red,Fail)]] || Test completed and failed to meet criteria. || || [[Color(yellow,Complete)]] || Test completed but will require re-execution due to expected changes || || [[Color(orange,Blocked)]] || Blocked by ticketed issue(s). || || [[Color(#63B8FF,In Progress)]] || Currently under test. || [[BR]] = Test Plan Steps = 1. As Experimenter1, request !ListResources from BBN ExoGENI. 2. Review advertisement RSpec for a list of OS images which can be loaded, and identify available resources. 3. Verify that the GPO Ubuntu image is available. 4. Define a request RSpec for two VMs, each with a GPO Ubuntu image. 5. Create the first slice. 6. Create a sliver in the first slice, using the RSpec defined in step 4. 7. Log in to each of the systems, and send traffic to the other system sharing a VLAN. 8. Using root privileges on one of the VMs load a Kernel module. 9. As Experimenter2, request !ListResources from BBN ExoGENI. 10. Define a request RSpec for two bare metal nodes, both using the uploaded GPO Ubuntu images. 11. Create the second slice. 12. Create a sliver in the second slice, using the RSpec defined in step 10. 13. Log in to each of the systems, and send traffic to the other system. 14. Verify that experimenters 1 and 2 cannot use the control plane to access each other's resources (e.g. via unauthenticated SSH, shared writable filesystem mount) 15. Review system statistics and VM isolation and network isolation on data plane. 16. Verify that each VM has a distinct MAC address for that interface. 17. Verify that VMs' MAC addresses are learned on the data plane switch. 18. Stop traffic and delete slivers.