Changes between Version 23 and Version 24 of GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-ADM-2
- Timestamp:
- 02/26/13 19:53:11 (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-ADM-2
v23 v24 29 29 || 3B || [[Color(lightgreen,Pass: most criteria)]] || 2012-05-27 || || enable mode on switch not available to site admins, but available information appears sufficient || 30 30 || 3C || [[Color(green,Pass)]] || 2012-05-28 || || || 31 || 3D || [[Color( orange,Blocked)]] |||| || ([exoticket:10], [exoticket:19]) serial access to switches ||31 || 3D || [[Color(lightgreen,Pass: most criteria)]] || 2013-02-26 || || ([exoticket:10], [exoticket:19]) serial access to switches || 32 32 || 4A || || || || ([exoticket:10]) ready to test || 33 33 || 4B || [[Color(lightgreen,Pass: most criteria)]] || 2012-05-28 || || enable mode on switch not available to site admins, but available information seems sufficient || 34 34 || 4C || [[Color(lightgreen,Pass: most criteria)]] || 2012-05-28 || || http access may be enabled, but probably does not work at all, and at most works on the private network || 35 || 4D || [[Color( orange,Blocked)]] |||| || ([exoticket:10], [exoticket:19]) blocked on serial access to switches ||35 || 4D || [[Color(lightgreen,Pass: most criteria)]] || 2013-02-26 || || ([exoticket:10], [exoticket:19]) blocked on serial access to switches || 36 36 || 5 || [[Color(orange,Blocked)]] || || || blocked on EG-ADM-1 step 4C (i need to investigate the network topology to figure out where to test from) || 37 37 … … 505 505 * It should be possible to view the running configuration via the serial console 506 506 507 ==== Results of testing step 3D: 2013-02-26 ==== 508 509 From bbn-hn: 510 {{{ 511 bbn-hn,[~],00:49(0)$ sudo screen /dev/ttyUSB1 512 Enter radius username: chaos 513 Enter radius password: 514 515 bbn-8052.bbn.xo>en 516 517 Enable access using (oper) credentials restricted to admin accounts only. 518 bbn-8052.bbn.xo> 519 }}} 520 521 So, access works, enable mode doesn't. 522 507 523 == Step 4: verify access to 8264 (dataplane) switch == 508 524 … … 643 659 bbn-8264.bbn.xo> 644 660 }}} 661 Again here, access works, but enable mode doesn't. 645 662 646 663 == Step 5: verify that IMM/IPMI is not accessible without the VPN ==