Changes between Version 7 and Version 8 of GENIRacksHome/CiscoGENIRacks/AcceptanceTestStatus/CG-EXP-4

Timestamp:

01/09/15 15:07:55 (9 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIRacksHome/CiscoGENIRacks/AcceptanceTestStatus/CG-EXP-4

@@ -15 +15 @@
 || '''Stitching topologies''' ||'''State''' || ''' !Tickets/Comments'''  ||
 ||NCSU2 to NCSU2              ||   N/A      ||Not planned at this time ||                 ||
-||NCSU2 to GPO EG             ||[[Color(red,Fail)]]  || ExoGENI stitching not available at this time , covered in [http://groups.geni.net/geni/wiki/GENIRacksHome/CiscoGENIRacks/AcceptanceTestStatus/CG-EXP-2 CG-EXP-2] ||
+||NCSU2 to GPO EG             ||[[Color(red,Fail)]]  || This scenario is ExoGENI stitching not available at this time , covered in [http://groups.geni.net/geni/wiki/GENIRacksHome/CiscoGENIRacks/AcceptanceTestStatus/CG-EXP-2 CG-EXP-2] ||
 ||NCSU2 to IG ION site        ||[[Color(green,Pass)]]||~~Stitching setup; remoteLinkId definition~~||
 ||NCSU2 to IG AL2S site       ||            ||                           ||
@@ -34 +34 @@
 Testing scenario cover both ExoGENI and GENI stitching. A mix of test topologies are run with the GENI Stitching feature.
 
-=== NCSU2 to GPO EG (ExoGENI Stitching) ===
-Using the RSpec [cisco-ncsu2-eg-gpo.rspec] tried to create an ExoGENI stitched sliver via the ExoSM:
+=== NCSU2 to GPO EG  ===
+This is ExoGENI Stitching, which is covered in [http://groups.geni.net/geni/wiki/GENIRacksHome/CiscoGENIRacks/AcceptanceTestStatus/CG-EXP-2 CG-EXP-2].  Using the RSpec [cisco-ncsu2-eg-gpo.rspec] tried to create an ExoGENI stitched sliver via the ExoSM:
 {{{
 $ omni createsliver -a eg-sm CG-CT-4a ./cisco-ncsu2-eg-gpo.rspec