Changes between Version 2 and Version 3 of GENIOperationsTrial/GENIStitchingCheck

Timestamp:

06/29/15 09:20:38 (9 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIOperationsTrial/GENIStitchingCheck

@@ -22 +22 @@
 == 1.3 SCS Check - Pass Criteria ==
 
-If step 4 above shows `1`, than check passes.  A value of `1` means that the SCS service is running and answering a `listaggregates` request. The monitoring system also verifies that the list of aggregates returned includes the expected sites.
+If step 4 shows `1`, than check passes.  A value of `1` means that the SCS service is running and answering a `listaggregates` request. The monitoring system also verifies that the list of aggregates returned includes the expected sites.
  
 == 1.4 SCS Check - Fail Criteria and Escalation ==
 
-If step 4 above shows `0`, than the check fails.  A value of `0` means that the SCS system is either not responding or responding with the wrong list of site aggregates.
+If step 4 shows `0`, than the check fails.  A value of `0` means that the SCS system is either not responding or responding with the wrong list of site aggregates.
 
 '''__Escalation:__''' SCS issues should be escalated to GMOC.
@@ -34 +34 @@
 == 2.1 Goals of Stitching Sites Check ==
 
-The Stitching site check verifies that the SCS knows all path combinations between all aggregates that support stitching.
+The Stitching Site check verifies that the SCS knows all path combinations between all aggregates that support stitching. This check does no actually verify that the paths are able to exchange traffic over the paths at this time.
 
 == 2.2 Steps for Stitching Sites Check ==