Changes between Version 9 and Version 10 of GENIOperationsTrial/GENIStitchingCheck

Timestamp:

06/29/15 15:17:36 (9 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIOperationsTrial/GENIStitchingCheck

@@ -9 +9 @@
 = 1.0 GENI SCS Check =
 
-== 1.1 Goals of SCS Check ==
+== 1.1 Goals of SCS - Server Check ==
 
 The SCS is a service that provides stitching path information for known sites.  This section defines to verify that the SCS is up and providing path information for the known stitching sites. All information used is found in the [http://genimon.uky.edu/ GENI Monitoring System] and available via alerts to [http://tamassos.gpolab.bbn.com/nagios3/ GPO Nagios System]. Checks are run for:
@@ -15 +15 @@
  * scs-geni-test - The Test SCS which is used for testing purposed by GPO, InstaGENI, CloudLab and iMind teams.
 
-== 1.2 Steps for SCS Check ==
+== 1.2 Steps for SCS - Server Check ==
 
  1. Login to [http://tamassos.gpolab.bbn.com/nagios3/ GPO Nagios System]
@@ -24 +24 @@
  6. Review the Test SCS `scs-geni-test` status, which can be `UP` or `DOWN`.
 
-== 1.3 SCS Check - Pass Criteria ==
+== 1.3 SCS - Server Check - Pass Criteria ==
 
 If step 5 shows `UP`, than the Production Internet2 SCS check passes.  A value of `UP` means that the SCS service is running and answering a `listaggregates` request. The monitoring system also verifies that the list of aggregates returned includes the expected sites.
@@ -30 +30 @@
 If step 6 shows `UP`, than test SCS check passes.  A value of `UP` means that the SCS service is running and answering a `listaggregates` request. The monitoring system also verifies that the list of aggregates returned includes the expected sites.
  
-== 1.4 SCS Check - Fail Criteria and Escalation ==
+== 1.4 SCS - Server Check - Fail Criteria and Escalation ==
 
 If step 5 shows `DOWN`, than the Production SCS check fails.  A value of `DOWN` means that the SCS system is either not responding or responding with the wrong list of site aggregates.