Version 3 (modified by 9 years ago) (diff) | ,
---|
CHK-005 GENI Long Running Slice Check
The GENI Long Running Slice uses 3 stitching sites in a triangle
topology. The topology includes 1 compute resource at each of these sites: cenig-ig, uchicago-ig and nysernet-ig. All nodes are exchanging traffic continuously. This check verifies:
- Slivers from all AL2S and Rack Aggregates
- AL2S sliver VLAN and traffic information
- Rack Aggregates traffic information
1.0 GENI Long Running Slice - Sliver Check
1.1 Goals of the Long Running Sliver Check
This sections shows how to verify the sliver allocation for the triangle slice.
1.2 Steps for the Long Running Slice AL2S Check
- Login to the [http://genimon.uky.edu/ GENI Monitoring System.
- Type
"triangle"
in the top left hand Search box. This will show results in the main panel. - In the
Slices
listing select"ch.geni.net_ln-test_slice_triangle"
. This will show results in the main panel. - Select the
Slivers
tab. This will results in a lists of 4 slivers (1 from AL2S and 3 from Rack Aggregates).
1.3 Long Running Slice AL2S Check - Pass Criteria
If step 4 lists these 4 slivers:
than the first of the 3 items checked in this procedures passes
This sections will clearly define the criteria that to be met in order to deem the GENI "Function/Service Name" state as functioning properly.
1.4 Long Running Slice AL2S Check - Fail Criteria and Escalation
This sections will clearly define the failure criteria and the escalation team if the GENI "Function/Service Name" state is deemed to not be functioning properly.
2.0 GENI Long Running Slice AL2S Check
2.1 Goals of the Long Running Slice AL2S Check
This sections shows how to verify the resources allocated to the triangle sliver in AL2S.
2.2 Steps for the Long Running Slice AL2S Check
- Login to the [http://genimon.uky.edu/ GENI Monitoring System.
- Type
"triangle"
in the top left hand Search box. This will show results in the main panel. - In the
Slices
listing select"ch.geni.net_ln-test_slice_triangle"
. This will show results in the main panel. - Select the
Slivers
tab. This will results in a lists of 4 slivers (1 from AL2S and 3 from Rack Aggregates).
2.3 Long Running Slice AL2S Check - Pass Criteria
If step 4 lists 4 slivers, than the first of the 3 items checked in this procedures passes This sections will clearly define the criteria that to be met in order to deem the GENI "Function/Service Name" state as functioning properly.
2.4 Long Running Slice AL2S Check - Fail Criteria and Escalation
This sections will clearly define the failure criteria and the escalation team if the GENI "Function/Service Name" state is deemed to not be functioning properly.
Escalation: <<Insert escalation team here>>
Note: If a Function/Service requires multiple checks, expand procedure to re-use 1.0-1.4 sections and increase numbering to 2.0-2.4, 3.0-3.4....N.0-N.4
Attachments (9)
- triangle-slivers.jpg (104.3 KB) - added by 9 years ago.
- cenic-receive.jpg (359.6 KB) - added by 9 years ago.
- cenic-transmit.jpg (359.9 KB) - added by 9 years ago.
- triangle-sliver-details.jpg (160.1 KB) - added by 8 years ago.
- nysernet-1715.jpg (139.1 KB) - added by 8 years ago.
- nysernet-1714.jpg (131.8 KB) - added by 8 years ago.
- nysernet-1715-usage.jpg (809.9 KB) - added by 8 years ago.
- nysernet-1714-usage.jpg (826.9 KB) - added by 8 years ago.
- Triangle-details.jpg (80.4 KB) - added by 8 years ago.