| 82 | |
| 83 | = 3.0 GENI Long Running Slice - Sites Check = |
| 84 | |
| 85 | == 3.1 Goals of the Long Running Slice - Site Check == |
| 86 | |
| 87 | This sections shows how to verify the resources allocated to the triangle sliver in each of the 3 site aggregates: cenic-ig, uchicago-ig and nysernet-ig.. |
| 88 | |
| 89 | == 3.2 Steps for the Long Running Slice - Sites Check == |
| 90 | |
| 91 | Assuming you are still logged into the [http://genimon.uky.edu/ GENI Monitoring System: |
| 92 | |
| 93 | 1. Type `"triangle"` in the top left hand Search box. This will show results in the main panel. |
| 94 | 2. Select the sliver reported by the aggregate `al2s.internet2.edu`. This will show results in the main panel for all links associated to the sliver. |
| 95 | 3. The list of links should include 3 circuits: `I2-LOSA-NEWY32AOA-VLAN-51145`, `I2-LOSA-STAR-VLAN-51146`, `I2-NEWY32AOA-STAR-VLAN-51144` |
| 96 | 4. Select `"I2-LOSA-NEWY32AOA-VLAN-51145"`. This will update the main panel to show two endpoints for the circuit: `sdn-sw.losa.net.internet2.edu:eth5/1:1550` and `sdn-sw.newy32aoa.net.internet2.edu:eth7/2:1714`. |
| 97 | 5. Select `"sdn-sw.losa.net.internet2.edu:eth5/1:1550"`. This will update the main panel to show traffic statistics for the VLAN 1550 at the Los Angeles router interface "eth5/1" where cenic-ig is sending: |
| 98 | |
| 99 | [[Image(cenic-transmit.jpg)]] |
| 100 | |
| 101 | 6. Navigate `Back` to the list of interfaces and select `sdn-sw.newy32aoa.net.internet2.edu:eth7/2:1714`. This will update the main panel to show traffic statistics for the VLAN 1714 at the New York router interface "eth5/1" and is being received by the cenic-ig router: |
| 102 | |
| 103 | [[Image(cenic-receive.jpg)]] |
| 104 | |
| 105 | |
| 106 | == 3.3 Long Running Slice AL2S Check - Pass Criteria == |
| 107 | |
| 108 | If step 5 and 6 show the expected level of traffic, then this procedures passes. |
| 109 | |
| 110 | == 3.4 Long Running Slice AL2S Check - Fail Criteria and Escalation == |
| 111 | |
| 112 | There are several steps where this procedure can fail to meet the expected criteria. |
| 113 | |
| 114 | If step 3 fails to list the 3 expected circuits: |
| 115 | |
| 116 | '''__Escalation:__''' If 1 or more circuits are missing - Report to GMOC team - gmoc@grnoc.iu.edu [[BR]] |
| 117 | |
| 118 | If step 4 fails to list one of the two expected endpoints: |
| 119 | |
| 120 | '''__Escalation:__''' - Report to GMOC team - gmoc@grnoc.iu.edu [[BR]] |
| 121 | |
| 122 | If step 5 or step 6 are missing traffic statistics: |
| 123 | |
| 124 | '''__Escalation:__''' If traffic statistics are missing - Report to GENI Operations team at geni-ops@googlegroups.com [[BR]] |
| 125 | |