Changes between Version 3 and Version 4 of GENIOperationsTrial/GENIExpSliceCheck

Timestamp:

06/29/15 10:14:42 (9 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIOperationsTrial/GENIExpSliceCheck

@@ -3 +3 @@
 = CHK-005 GENI Long Running Slice Check =
 
-The GENI Long Running Slice uses 3 stitching sites in a `triangle` topology. The topology includes 1 compute resource at each of these sites: cenig-ig, uchicago-ig and nysernet-ig. All nodes are exchanging traffic continuously.   This check verifies:
+The GENI Long Running Slice uses 3 stitching sites in a `triangle` topology. The topology includes 1 compute resource at each of these sites: cenic-ig, uchicago-ig and nysernet-ig. All nodes are exchanging traffic continuously.   This check verifies:
  - Slivers from all AL2S and Rack Aggregates
  - AL2S sliver VLAN and traffic information 
@@ -16 +16 @@
 == 1.2 Steps for the Long Running Slice AL2S Check ==
 
- 1. Login to the [http://genimon.uky.edu/ GENI Monitoring System.
+ 1. Login to the [http://genimon.uky.edu/ GENI Monitoring System].
  2. Type `"triangle"` in the top left hand Search box. This will show results in the main panel. 
  3. In the `Slices` listing select `"ch.geni.net_ln-test_slice_triangle"`.  This will show results in the main panel. 
@@ -23 +23 @@
 == 1.3 Long Running Slice AL2S Check - Pass Criteria ==
 
-If step 4 lists these 4 slivers:
+Step 4 should list these 4 slivers:
 
 [[Image(triangle-slivers.jpg)]]
 
-
- than the first of the 3 items checked in this procedures passes
-This sections will clearly define the criteria that to be met in order to deem the GENI "!Function/Service Name" state as functioning properly.
+If the slivers are listed and the `"Last Updated"` field is less than 30 minutes this check passes.
 
 == 1.4 Long Running Slice AL2S Check - Fail Criteria and Escalation ==
 
-This sections will clearly define the failure criteria and the escalation team if the GENI "!Function/Service Name" state is deemed to not be functioning properly.
+If step 4 fails to list 4 slivers than escalation depends on the sliver missing:
 
+ '''__Escalation:__''' If site sliver missing - Report to InstaGENI Operations team at geni-ops@googlegroups.com [[BR]]
+ '''__Escalation:__''' If AL2S sliver missing - Report to GMOC team - gmoc@grnoc.iu.edu [[BR]]
+ '''__Escalation:__''' If `"Last Updated"` field for any sliver is greater than 1 hour - Report to UKY Monitoring team at geni-ops@googlegroups.com [[BR]]
 
 = 2.0 GENI Long Running Slice AL2S Check =
@@ -43 +44 @@
 
 == 2.2 Steps for the Long Running Slice AL2S Check ==
+Assuming you are still logged into the [http://genimon.uky.edu/ GENI Monitoring System:
 
- 1. Login to the [http://genimon.uky.edu/ GENI Monitoring System.
- 2. Type `"triangle"` in the top left hand Search box. This will show results in the main panel. 
- 3. In the `Slices` listing select `"ch.geni.net_ln-test_slice_triangle"`.  This will show results in the main panel. 
- 4. Select the `Slivers` tab. This will results in a lists of 4 slivers (1 from AL2S and 3 from Rack Aggregates).
+ 1. Type `"triangle"` in the top left hand Search box. This will show results in the main panel. 
+ 2. Select the sliver reported by the aggregate `al2s.internet2.edu`. This will show results in the main panel for all links associated to the sliver. 
+ 3. The list of links should include 3 circuits: `I2-LOSA-NEWY32AOA-VLAN-51145`, `I2-LOSA-STAR-VLAN-51146`, `I2-NEWY32AOA-STAR-VLAN-51144`
+ 4. Select `"I2-LOSA-NEWY32AOA-VLAN-51145"`. This will update the main panel to show two endpoints for the circuit: `sdn-sw.losa.net.internet2.edu:eth5/1:1550` and `sdn-sw.newy32aoa.net.internet2.edu:eth7/2:1714`.
+ 5. Select `"sdn-sw.losa.net.internet2.edu:eth5/1:1550"`. This will update the main panel to show traffic statistics for the VLAN 1550 at the Los Angeles router interface "eth5/1" where cenic-ig is connected:
+
+[[Image(cenic-ig-traffic.jpg)]]
+
 
 == 2.3 Long Running Slice AL2S Check - Pass Criteria ==