Changes between Version 10 and Version 11 of GENIOperationsTrial/GENIExpSliceCheck

Timestamp:

06/29/15 10:46:27 (9 years ago)

Author:

lnevers@bbn.com

Comment:

i

GENIOperationsTrial/GENIExpSliceCheck

@@ -92 +92 @@
 
  1. Type `"triangle"` in the top left hand Search box. This will show results in the main panel. 
- 2. Select the sliver reported by the aggregate `al2s.internet2.edu`. This will show results in the main panel for all links associated to the sliver. 
- 3. The list of links should include 3 circuits: `I2-LOSA-NEWY32AOA-VLAN-51145`, `I2-LOSA-STAR-VLAN-51146`, `I2-NEWY32AOA-STAR-VLAN-51144`
- 4. Select `"I2-LOSA-NEWY32AOA-VLAN-51145"`. This will update the main panel to show two endpoints for the circuit: `sdn-sw.losa.net.internet2.edu:eth5/1:1550` and `sdn-sw.newy32aoa.net.internet2.edu:eth7/2:1714`.
- 5. Select `"sdn-sw.losa.net.internet2.edu:eth5/1:1550"`. This will update the main panel to show traffic statistics for the VLAN 1550 at the Los Angeles router interface "eth5/1" where cenic-ig is sending:
-
-[[Image(cenic-transmit.jpg)]]
-
- 6. Navigate `Back` to the list of interfaces and select `sdn-sw.newy32aoa.net.internet2.edu:eth7/2:1714`. This will update the main panel to show traffic statistics for the VLAN 1714 at the New York router interface "eth5/1" and is being received by the cenic-ig router:
-
-[[Image(cenic-receive.jpg)]]
-
+ 2. In the `Slices` listing select `"ch.geni.net_ln-test_slice_triangle"`.  This will show results in the main panel. 
+ 3. Select the `Slivers` tab. This will results in a lists of 4 slivers (1 from AL2S and 3 from Rack Aggregates).
+ X. Select the sliver `geni.uchicago.edu_sliver_5003`
+ Y. Select the sliver `instageni.cenic.net_sliver_1266`
+ Z. Select the sliver `instageni.nysernet.org_sliver_24968`
 
 == 3.3 Long Running Slice - Sites Check - Pass Criteria ==
 
-If step 5 and 6 show the expected level of traffic, then this procedures passes.
+If step X and Y show the expected level of traffic, then this procedures passes.  (??)
 
 == 3.4 Long Running Slice - Sites Check - Fail Criteria and Escalation ==
@@ -112 +106 @@
 There are several steps where this procedure can fail to meet the expected criteria.
 
-If step 3 fails to list the 3 expected circuits: 
+If step X fails to list ???: 
 
- '''__Escalation:__''' If 1 or more circuits are missing - Report to GMOC team - gmoc@grnoc.iu.edu [[BR]]
+ '''__Escalation:__''' - Report to InstaGENI team at geni-ops@googlegroups.com [[BR]]
 
-If step 4 fails to list one of the two expected endpoints:
+If step Y fails to list ???:
 
- '''__Escalation:__''' - Report to GMOC team - gmoc@grnoc.iu.edu [[BR]]
+ '''__Escalation:__''' - Report to InstaGENI team at geni-ops@googlegroups.com [[BR]]
 
-If step 5 or step 6 are missing traffic statistics:
+If step Z fails to list ???:
 
- '''__Escalation:__''' If traffic statistics are missing - Report to GENI Operations team at geni-ops@googlegroups.com [[BR]]
+ '''__Escalation:__''' - Report to InstaGENI team at geni-ops@googlegroups.com [[BR]]