| 1 | [[PageOutline(1-2)]] |
| 2 | |
| 3 | = CHK-005 GENI Long Running Slice Check = |
| 4 | |
| 5 | The GENI Long Running Slice uses 3 stitching sites in a `triangle` topology. The topology includes 1 compute resource at each of these sites: cenig-ig, uchicago-ig and nysernet-ig. All nodes are exchanging traffic continuously. This check verifies the following: |
| 6 | |
| 7 | - AL2S routers show the correct circuit information for the sliver |
| 8 | - Rack aggregates show the correct usage details for the sliver. |
| 9 | |
| 10 | = 1.0 GENI Long Running Slice AL2S Check = |
| 11 | |
| 12 | == 1.1 Goals of the Long Running Slice AL2S Check == |
| 13 | |
| 14 | This sections shows how to verify the resources allocated to the triangle sliver in AL2S. |
| 15 | |
| 16 | == 1.2 Steps for the Long Running Slice AL2S Check == |
| 17 | |
| 18 | 1. Login to the [http://genimon.uky.edu/ GENI Monitoring System. |
| 19 | 2. Type `"triangle in the top left hand Search box. This will show results in the main panel. |
| 20 | |
| 21 | == 1.3 Long Running Slice AL2S Check - Pass Criteria == |
| 22 | |
| 23 | This sections will clearly define the criteria that to be met in order to deem the GENI "!Function/Service Name" state as functioning properly. |
| 24 | |
| 25 | == 1.4 Long Running Slice AL2S Check - Fail Criteria and Escalation == |
| 26 | |
| 27 | This sections will clearly define the failure criteria and the escalation team if the GENI "!Function/Service Name" state is deemed to not be functioning properly. |
| 28 | |
| 29 | '''__Escalation:__''' ``<<Insert escalation team here>>`` |
| 30 | |
| 31 | ---- |
| 32 | |
| 33 | '''Note:''' ''If a !Function/Service requires multiple checks, expand procedure to re-use 1.0-1.4 sections and increase numbering to 2.0-2.4, 3.0-3.4....N.0-N.4'' |
| 34 | |
| 35 | ---- |