wiki:GENIOESSTopologiesTestStatus/OESS-TC2

Version 13 (modified by lnevers@bbn.com, 10 years ago) (diff)

--

ION Site to AL2S site via 10 Cross Connects

This test case creates a point to point topology between an ION Site (GPO) and an AL2S site (Stanford) via the 10 available cross-connects.

Test Status

This section captures the status for each function verified by this test plan.

AL2S to ION Cross-connect State Ticket Notes
Stanford IG to GPO IG via Atlanta Color(green,Pass)?
Stanford IG to GPO IG via Chicago
Stanford IG to GPO IG via Cleveland Color(green,Pass)?
Stanford IG to GPO IG via Houston Color(green,Pass)?
Stanford IG to GPO IG via Kansas
Stanford IG to GPO IG via Los Angeles
Stanford IG to GPO IG via New York
Stanford IG to GPO IG via Salt Lake
Stanford IG to GPO IG via Seattle
Stanford IG to GPO IG via Washington


State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.


Test Details

The RSpec stitch-ig-gpo-ig-stan.rspec is used for all of the 10 test cases captured in this page. Each of the potential stitching paths are requested by using the stitcher option --excludeHop. The available cross-connects are:

  • urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:xe-0/3/0
  • urn:publicid:IDN+ion.internet2.edu+interface+rtr.chic:et-10/0/0
  • urn:publicid:IDN+ion.internet2.edu+interface+rtr.clev:et-5/0/0
  • urn:publicid:IDN+ion.internet2.edu+interface+rtr.hous:xe-0/1/3
  • urn:publicid:IDN+ion.internet2.edu+interface+rtr.kans:xe-0/0/3
  • urn:publicid:IDN+ion.internet2.edu+interface+rtr.losa:et-10/0/0
  • urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:et-5/0/0
  • urn:publicid:IDN+ion.internet2.edu+interface+rtr.salt:xe-0/1/1
  • urn:publicid:IDN+ion.internet2.edu+interface+rtr.seat:et-5/0/0
  • urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:et-9/0/0

The Stitching Computation Service suggests the cross connect to be used used for stitching paths in the alphabetical order with Atlanta being the default. If the --excludeHop specifies the Atlanta urn then the Chicago hop will be used. If Atlanta and Chicago URNs are excluded then the next hop Houston in the list is used, and so on.

All VM end-point hosts used in these test cases are Xen hosts. Each test case exchanges describe traffic types (TCP, UDP, ICMP) for 60 seconds, tools used are iperf and ping.

ION Site to AL2S site via Atlanta Cross Connect (default)

The Atlanta cross-connect is the default path so only the Stanford ION interface (instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1) is excluded to choose the AL2S path.

Create the sliver:

$ stitcher.py createsliver gpo2stan ./stitch-ig-gpo-ig-stan.rspec --excludehop urn:publicid:IDN+instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1 -o
11:27:36 INFO    : Configured logging from file /home/lnevers/gcf-2.7-preview-0912/src/gcf/stitcher_logging.conf
11:27:36 INFO    : Reading slice gpo2stan credential...
11:27:36 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+gpo2stan expires on 2014-09-26 15:11:12 UTC
11:27:36 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
11:27:36 INFO    : Calling SCS...
11:27:38 INFO    : Multi-AM reservation will include resources from these aggregates:
11:27:38 INFO    : 	<Aggregate stanford-ig>
11:27:38 INFO    : 	<Aggregate gpo-ig>
11:27:38 INFO    : 	<Aggregate oess>
11:27:38 INFO    : 	<Aggregate ion>
11:27:38 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-for-lnevers-cred.xml
11:27:38 INFO    : Stitcher doing createsliver at <Aggregate stanford-ig>...
11:27:55 INFO    : ... Allocation at <Aggregate stanford-ig> complete.
11:27:55 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-for-lnevers-cred.xml
11:27:55 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:28:13 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:28:13 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-for-lnevers-cred.xml
11:28:13 INFO    : Stitcher doing createsliver at <Aggregate oess>...
11:28:17 INFO    : ... Allocation at <Aggregate oess> complete.
11:28:17 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-for-lnevers-cred.xml
11:28:17 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:29:02 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:29:02 INFO    : Pausing 30 seconds to let circuit become ready...
11:29:40 INFO    : DCN circuit 119001 is ready at <Aggregate ion>
11:29:47 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-for-lnevers-cred.xml
11:29:47 INFO    : ... Allocation at <Aggregate ion> complete.
11:29:47 INFO    : All aggregates are complete.
11:29:47 INFO    : Your resources expire at 2014-09-26T15:11:12 (UTC). 
11:29:47 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/oess/Xconnect-stitch/gpo2stan-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice gpo2stan at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determine login:

$ readyToLogin gpo2stan -a stanford-ig
...
ig-stan's geni_status is: ready 
User lnevers logs in to ig-stan using:
	ssh -p 36154  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.stanford.edu

$ readyToLogin gpo2stan -a gpo-ig
...
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 34874  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

Traffic

Iperf Stanford IG VM to GPO IG VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-09-19

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   140 MBytes  19.5 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec  22.4 MBytes  3.12 Mbits/sec
[  6]  0.0-60.2 sec  28.8 MBytes  4.00 Mbits/sec
[  4]  0.0-60.5 sec  31.8 MBytes  4.40 Mbits/sec
[  7]  0.0-60.6 sec  31.1 MBytes  4.31 Mbits/sec
[  3]  0.0-60.6 sec  29.5 MBytes  4.08 Mbits/sec
[SUM]  0.0-60.6 sec   144 MBytes  19.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.2 sec  11.8 MBytes  1.64 Mbits/sec
[  4]  0.0-60.3 sec  16.6 MBytes  2.31 Mbits/sec
[  6]  0.0-60.6 sec  12.8 MBytes  1.77 Mbits/sec
[  5]  0.0-60.6 sec  17.6 MBytes  2.44 Mbits/sec
[ 11]  0.0-60.6 sec  18.5 MBytes  2.56 Mbits/sec
[  9]  0.0-60.9 sec  9.38 MBytes  1.29 Mbits/sec
[ 12]  0.0-60.9 sec  18.6 MBytes  2.56 Mbits/sec
[ 10]  0.0-61.4 sec  13.2 MBytes  1.81 Mbits/sec
[  7]  0.0-62.4 sec  13.1 MBytes  1.77 Mbits/sec
[  8]  0.0-64.4 sec  14.9 MBytes  1.94 Mbits/sec
[SUM]  0.0-64.4 sec   146 MBytes  19.1 Mbits/sec

Iperf Stanford IG VM to GPO IG VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512758 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  14.453 ms 413394/512755 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from Stanford IG VM to GPO IG VM

60 packets transmitted, 60 received, 0% packet loss, time 59102ms
rtt min/avg/max/mdev = 86.618/86.813/87.153/0.353 ms

Iperf GPO IG VM to Stanford IG VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-09-19

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   140 MBytes  19.6 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.1 sec  22.8 MBytes  3.18 Mbits/sec
[  7]  0.0-60.2 sec  22.0 MBytes  3.06 Mbits/sec
[  5]  0.0-60.4 sec  26.2 MBytes  3.65 Mbits/sec
[  4]  0.0-60.4 sec  45.4 MBytes  6.30 Mbits/sec
[  3]  0.0-60.8 sec  27.2 MBytes  3.76 Mbits/sec
[SUM]  0.0-60.8 sec   144 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  15.2 MBytes  2.13 Mbits/sec
[  6]  0.0-60.4 sec  13.2 MBytes  1.84 Mbits/sec
[  4]  0.0-60.6 sec  11.5 MBytes  1.59 Mbits/sec
[  8]  0.0-60.6 sec  14.5 MBytes  2.01 Mbits/sec
[ 10]  0.0-60.9 sec  16.4 MBytes  2.25 Mbits/sec
[ 11]  0.0-61.0 sec  11.2 MBytes  1.55 Mbits/sec
[  3]  0.0-61.2 sec  15.0 MBytes  2.06 Mbits/sec
[  9]  0.0-61.4 sec  17.9 MBytes  2.44 Mbits/sec
[ 12]  0.0-62.2 sec  21.0 MBytes  2.83 Mbits/sec
[  5]  0.0-62.8 sec  10.2 MBytes  1.37 Mbits/sec
[SUM]  0.0-62.8 sec   146 MBytes  19.5 Mbits/sec

Iperf GPO IG VM to Stanford IG VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512805 datagrams
[  3] Server Report:
[  3]  0.0-60.3 sec   139 MBytes  19.4 Mbits/sec  14.247 ms 413459/512804 (81%)
[  3]  0.0-60.3 sec  1 datagrams received out-of-order

Ping from GPO IG VM to Stanford IG VM

60 packets transmitted, 60 received, 0% packet loss, time 59102ms
rtt min/avg/max/mdev = 86.490/86.885/89.458/0.468 ms

ION Site to AL2S site via Chicago Cross Connect

By excluding the Atlanta cross-connect (ion.internet2.edu+interface+rtr.atla:xe-0/3/0) the next cross-connect chosen is Chicago (internet2.edu+interface+rtr.chic:et-10/0/0). Also excluded is the Stanford ION interface (instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1) is excluded to choose the AL2S interface.

Create the sliver:

$ stitcher.py createsliver gpo2stan-chi ./stitch-ig-gpo-ig-stan.rspec --excludehop urn:publicid:IDN+instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1 --excludehop urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:xe-0/3/0 -o -r ln-test
12:30:50 INFO    : Configured logging from file /home/lnevers/gcf-2.7-preview-0912/src/gcf/stitcher_logging.conf
12:30:51 INFO    : Reading slice gpo2stan-chi credential...
12:30:51 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+gpo2stan-chi expires on 2014-09-26 15:45:55 UTC
12:30:51 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
12:30:51 INFO    : Calling SCS...
12:30:52 INFO    : Multi-AM reservation will include resources from these aggregates:
12:30:52 INFO    : 	<Aggregate stanford-ig>
12:30:52 INFO    : 	<Aggregate gpo-ig>
12:30:52 INFO    : 	<Aggregate oess>
12:30:52 INFO    : 	<Aggregate ion>
12:30:52 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-chi-for-lnevers-cred.xml
12:30:52 INFO    : Stitcher doing createsliver at <Aggregate stanford-ig>...
12:31:13 INFO    : ... Allocation at <Aggregate stanford-ig> complete.
12:31:13 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-chi-for-lnevers-cred.xml
12:31:13 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
12:31:28 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
12:31:28 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-chi-for-lnevers-cred.xml
12:31:28 INFO    : Stitcher doing createsliver at <Aggregate oess>...
12:31:32 INFO    : ... Allocation at <Aggregate oess> complete.
12:31:32 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-chi-for-lnevers-cred.xml
12:31:32 INFO    : Stitcher doing createsliver at <Aggregate ion>...
12:32:18 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
12:32:18 INFO    : Pausing 30 seconds to let circuit become ready...
12:32:55 INFO    : DCN circuit 119051 is ready at <Aggregate ion>
12:33:02 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-chi-for-lnevers-cred.xml
12:33:02 INFO    : ... Allocation at <Aggregate ion> complete.
12:33:02 INFO    : All aggregates are complete.
12:33:02 INFO    : Your resources expire at 2014-09-26T15:45:55 (UTC). 
12:33:02 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/oess/Xconnect-stitch/gpo2stan-chi-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice gpo2stan-chi at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determine login:

$ readyToLogin gpo2stan-chi -a stanford-ig
...
ig-stan's geni_status is: changing 
User lnevers logs in to ig-stan using:
	ssh -p 35386  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.stanford.edu

$ readyToLogin gpo2stan-chi -a gpo-ig
...
ig-gpo's geni_status is: changing 
User lnevers logs in to ig-gpo using:
	ssh -p 34874  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

Traffic

Iperf Stanford IG VM to GPO IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf Stanford IG VM to GPO IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from Stanford IG VM to GPO IG VM

Iperf GPO IG VM to Stanford IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf GPO IG VM to Stanford IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from GPO IG VM to Stanford IG VM

ION Site to AL2S site via Cleveland Cross Connect

By excluding the Atlanta cross-connect (ion.internet2.edu+interface+rtr.atla:xe-0/3/0) and the Chicago (internet2.edu+interface+rtr.chic:et-10/0/0) the next cross-connect chosen is Cleveland (ion.internet2.edu+interface+rtr.clev:et-5/0/0). Also excluded is the Stanford ION interface (instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1) is excluded to choose the AL2S interface.

Create the sliver:

$ stitcher.py createsliver gpo2stan-clev ./stitch-ig-gpo-ig-stan.rspec --excludehop urn:publicid:IDN+instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1 --excludehop urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:xe-0/3/0 --excludehop urn:publicid:IDN+ion.internet2.edu+interface+rtr.chic:et-10/0/0 -o -r ln-test -o
11:46:55 INFO    : Configured logging from file /home/lnevers/gcf-2.7-preview-0912/src/gcf/stitcher_logging.conf
11:46:55 INFO    : Reading slice gpo2stan-clev credential...
11:46:56 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+gpo2stan-clev expires on 2014-09-26 15:46:54 UTC
11:46:56 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
11:46:56 INFO    : Calling SCS...
11:46:57 INFO    : Multi-AM reservation will include resources from these aggregates:
11:46:57 INFO    : 	<Aggregate stanford-ig>
11:46:57 INFO    : 	<Aggregate gpo-ig>
11:46:57 INFO    : 	<Aggregate oess>
11:46:57 INFO    : 	<Aggregate ion>
11:46:57 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-clev-for-lnevers-cred.xml
11:46:57 INFO    : Stitcher doing createsliver at <Aggregate stanford-ig>...
11:47:16 INFO    : ... Allocation at <Aggregate stanford-ig> complete.
11:47:16 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-clev-for-lnevers-cred.xml
11:47:16 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:47:31 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:47:31 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-clev-for-lnevers-cred.xml
11:47:31 INFO    : Stitcher doing createsliver at <Aggregate oess>...
11:47:36 INFO    : ... Allocation at <Aggregate oess> complete.
11:47:36 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-clev-for-lnevers-cred.xml
11:47:36 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:48:22 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:48:22 INFO    : Pausing 30 seconds to let circuit become ready...
11:48:59 INFO    : DCN circuit 119021 is ready at <Aggregate ion>
11:49:06 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-clev-for-lnevers-cred.xml
11:49:06 INFO    : ... Allocation at <Aggregate ion> complete.
11:49:06 INFO    : All aggregates are complete.
11:49:06 INFO    : Your resources expire at 2014-09-26T15:46:54 (UTC). 
11:49:06 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/oess/Xconnect-stitch/gpo2stan-clev-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice gpo2stan-clev at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determine login:

$ readyToLogin gpo2stan-clev -a stanford-ig
...
ig-stan's geni_status is: ready 
User lnevers logs in to ig-stan using:
	ssh -p 35898  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.stanford.edu

$ readyToLogin gpo2stan-clev -a gpo-ig
...
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 37434  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

Traffic

Iperf Stanford IG VM to GPO IG VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-09-19

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   140 MBytes  19.5 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.1 sec  28.8 MBytes  4.01 Mbits/sec
[  3]  0.0-60.2 sec  27.9 MBytes  3.88 Mbits/sec
[  6]  0.0-60.5 sec  29.2 MBytes  4.06 Mbits/sec
[  5]  0.0-60.7 sec  28.8 MBytes  3.97 Mbits/sec
[  7]  0.0-60.8 sec  28.4 MBytes  3.92 Mbits/sec
[SUM]  0.0-60.8 sec   143 MBytes  19.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-60.2 sec  16.2 MBytes  2.27 Mbits/sec
[ 11]  0.0-60.5 sec  13.4 MBytes  1.86 Mbits/sec
[  7]  0.0-60.5 sec  16.4 MBytes  2.27 Mbits/sec
[  9]  0.0-60.6 sec  15.5 MBytes  2.15 Mbits/sec
[  6]  0.0-60.8 sec  18.8 MBytes  2.59 Mbits/sec
[  3]  0.0-61.4 sec  13.2 MBytes  1.81 Mbits/sec
[  4]  0.0-61.6 sec  12.9 MBytes  1.75 Mbits/sec
[ 10]  0.0-61.8 sec  12.8 MBytes  1.73 Mbits/sec
[  5]  0.0-61.8 sec  13.0 MBytes  1.77 Mbits/sec
[  8]  0.0-61.8 sec  13.8 MBytes  1.87 Mbits/sec
[SUM]  0.0-61.8 sec   146 MBytes  19.8 Mbits/sec

Iperf Stanford IG VM to GPO IG VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512774 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec   6.214 ms 413477/512773 (81%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from Stanford IG VM to GPO IG VM

60 packets transmitted, 60 received, 0% packet loss, time 59083ms
rtt min/avg/max/mdev = 79.801/80.139/81.092/0.440 ms

Iperf GPO IG VM to Stanford IG VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-09-19

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.2 sec   140 MBytes  19.6 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec  30.2 MBytes  4.23 Mbits/sec
[  7]  0.0-60.2 sec  28.1 MBytes  3.92 Mbits/sec
[  6]  0.0-60.2 sec  23.6 MBytes  3.29 Mbits/sec
[  3]  0.0-60.2 sec  31.6 MBytes  4.40 Mbits/sec
[  4]  0.0-60.8 sec  30.0 MBytes  4.14 Mbits/sec
[SUM]  0.0-60.8 sec   144 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-60.0 sec  16.2 MBytes  2.27 Mbits/sec
[ 10]  0.0-60.5 sec  12.0 MBytes  1.66 Mbits/sec
[  8]  0.0-60.5 sec  14.5 MBytes  2.01 Mbits/sec
[ 11]  0.0-60.7 sec  12.2 MBytes  1.69 Mbits/sec
[  3]  0.0-60.9 sec  18.6 MBytes  2.57 Mbits/sec
[  4]  0.0-61.2 sec  12.8 MBytes  1.75 Mbits/sec
[  6]  0.0-61.4 sec  14.9 MBytes  2.03 Mbits/sec
[  9]  0.0-61.9 sec  14.2 MBytes  1.93 Mbits/sec
[  7]  0.0-62.2 sec  18.0 MBytes  2.43 Mbits/sec
[  5]  0.0-62.8 sec  11.9 MBytes  1.59 Mbits/sec
[SUM]  0.0-62.8 sec   145 MBytes  19.4 Mbits/sec

Iperf GPO IG VM to Stanford IG VM (UDP) - UDP buffer size: xxx KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512814 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  14.294 ms 413473/512813 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from GPO IG VM to Stanford IG VM

60 packets transmitted, 60 received, 0% packet loss, time 59077ms
rtt min/avg/max/mdev = 79.984/80.309/83.009/0.514 ms

ION Site to AL2S site via Houston Cross Connect

By excluding the Atlanta cross-connect (ion.internet2.edu+interface+rtr.atla:xe-0/3/0), the Chicago (internet2.edu+interface+rtr.chic:et-10/0/0), Cleveland (ion.internet2.edu+interface+rtr.clev:et-5/0/0) the next cross-connect chosen is Houston (). Also excluded is the Stanford ION interface (instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1) is excluded to choose the AL2S interface. Create the sliver:

$ stitcher.py createsliver gpo2stan-hous ./stitch-ig-gpo-ig-stan.rspec --excludehop urn:publicid:IDN+instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1 --excludehop urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:xe-0/3/0 --excludehop urn:publicid:IDN+ion.internet2.edu+interface+rtr.chic:et-10/0/0 --excludehop urn:publicid:IDN+ion.internet2.edu+interface+rtr.clev:et-5/0/0 -o -r ln-test
12:01:07 INFO    : Configured logging from file /home/lnevers/gcf-2.7-preview-0912/src/gcf/stitcher_logging.conf
12:01:08 INFO    : Reading slice gpo2stan-hous credential...
12:01:08 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+gpo2stan-hous expires on 2014-09-26 16:01:07 UTC
12:01:08 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
12:01:08 INFO    : Calling SCS...
12:01:09 INFO    : Multi-AM reservation will include resources from these aggregates:
12:01:09 INFO    : 	<Aggregate stanford-ig>
12:01:09 INFO    : 	<Aggregate gpo-ig>
12:01:09 INFO    : 	<Aggregate oess>
12:01:09 INFO    : 	<Aggregate ion>
12:01:09 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-hous-for-lnevers-cred.xml
12:01:09 INFO    : Stitcher doing createsliver at <Aggregate stanford-ig>...
12:01:28 INFO    : ... Allocation at <Aggregate stanford-ig> complete.
12:01:28 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-hous-for-lnevers-cred.xml
12:01:28 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
12:01:46 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
12:01:46 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-hous-for-lnevers-cred.xml
12:01:46 INFO    : Stitcher doing createsliver at <Aggregate oess>...
12:01:50 INFO    : ... Allocation at <Aggregate oess> complete.
12:01:50 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-hous-for-lnevers-cred.xml
12:01:50 INFO    : Stitcher doing createsliver at <Aggregate ion>...
12:02:36 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
12:02:36 INFO    : Pausing 30 seconds to let circuit become ready...
12:03:13 INFO    : DCN circuit 119031 is ready at <Aggregate ion>
12:03:20 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-gpo2stan-hous-for-lnevers-cred.xml
12:03:20 INFO    : ... Allocation at <Aggregate ion> complete.
12:03:20 INFO    : All aggregates are complete.
12:03:20 INFO    : Your resources expire at 2014-09-26T16:01:07 (UTC). 
12:03:20 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/oess/Xconnect-stitch/gpo2stan-hous-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice gpo2stan-hous at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determine login:

$ readyToLogin gpo2stan-hous -a stanford-ig
...
ig-stan's geni_status is: ready 
User lnevers logs in to ig-stan using:
	ssh -p 36154  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.stanford.edu

$ readyToLogin gpo2stan-hous -a gpo-ig
...
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 37178  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

Traffic

Iperf Stanford IG VM to GPO IG VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-09-19

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   140 MBytes  19.5 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  22.1 MBytes  3.09 Mbits/sec
[  7]  0.0-60.2 sec  30.0 MBytes  4.18 Mbits/sec
[  6]  0.0-60.8 sec  33.8 MBytes  4.66 Mbits/sec
[  5]  0.0-61.1 sec  33.5 MBytes  4.60 Mbits/sec
[  3]  0.0-61.4 sec  21.5 MBytes  2.94 Mbits/sec
[SUM]  0.0-61.4 sec   141 MBytes  19.2 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.2 sec  15.1 MBytes  2.11 Mbits/sec
[ 10]  0.0-60.2 sec  14.9 MBytes  2.07 Mbits/sec
[  9]  0.0-60.6 sec  19.2 MBytes  2.67 Mbits/sec
[  7]  0.0-60.6 sec  14.0 MBytes  1.94 Mbits/sec
[  8]  0.0-60.7 sec  15.4 MBytes  2.13 Mbits/sec
[ 11]  0.0-60.7 sec  19.6 MBytes  2.71 Mbits/sec
[  4]  0.0-60.7 sec  9.12 MBytes  1.26 Mbits/sec
[ 12]  0.0-60.8 sec  18.6 MBytes  2.57 Mbits/sec
[  3]  0.0-61.3 sec  11.8 MBytes  1.61 Mbits/sec
[  5]  0.0-61.4 sec  8.88 MBytes  1.21 Mbits/sec
[SUM]  0.0-61.4 sec   147 MBytes  20.0 Mbits/sec

Iperf Stanford IG VM to GPO IG VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512772 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec  10.916 ms 413706/512770 (81%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from Stanford IG VM to GPO IG VM

60 packets transmitted, 60 received, 0% packet loss, time 59102ms
rtt min/avg/max/mdev = 87.448/87.927/90.008/0.536 ms

Iperf GPO IG VM to Stanford IG VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-09-19

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   140 MBytes  19.6 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec  26.1 MBytes  3.65 Mbits/sec
[  7]  0.0-60.3 sec  33.9 MBytes  4.71 Mbits/sec
[  6]  0.0-60.4 sec  32.9 MBytes  4.56 Mbits/sec
[  5]  0.0-60.5 sec  28.1 MBytes  3.90 Mbits/sec
[  4]  0.0-61.3 sec  23.4 MBytes  3.20 Mbits/sec
[SUM]  0.0-61.3 sec   144 MBytes  19.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 11]  0.0-60.1 sec  13.9 MBytes  1.94 Mbits/sec
[  6]  0.0-60.5 sec  12.5 MBytes  1.73 Mbits/sec
[  5]  0.0-60.6 sec  18.1 MBytes  2.51 Mbits/sec
[  7]  0.0-60.7 sec  13.2 MBytes  1.83 Mbits/sec
[  9]  0.0-60.7 sec  11.2 MBytes  1.55 Mbits/sec
[ 10]  0.0-60.9 sec  13.8 MBytes  1.89 Mbits/sec
[ 12]  0.0-61.7 sec  12.5 MBytes  1.70 Mbits/sec
[  3]  0.0-61.9 sec  26.2 MBytes  3.56 Mbits/sec
[  8]  0.0-61.9 sec  14.9 MBytes  2.02 Mbits/sec
[  4]  0.0-62.1 sec  10.5 MBytes  1.42 Mbits/sec
[SUM]  0.0-62.1 sec   147 MBytes  19.8 Mbits/sec

Iperf GPO IG VM to Stanford IG VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512814 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  12.057 ms 413493/512811 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from GPO IG VM to Stanford IG VM

60 packets transmitted, 60 received, 0% packet loss, time 59104ms
rtt min/avg/max/mdev = 87.503/87.858/88.307/0.222 ms

XXXX

ION Site to AL2S site via Los Angeles Cross Connect

Create the sliver:

Determine login:

readyToLogin gpo2stan -a stanford-ig
readyToLogin gpo2stan -a gpo-ig

Traffic

Iperf Stanford IG VM to GPO IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf Stanford IG VM to GPO IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from Stanford IG VM to GPO IG VM

Iperf GPO IG VM to Stanford IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf GPO IG VM to Stanford IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from GPO IG VM to Stanford IG VM

ION Site to AL2S site via New York Cross Connect

Create the sliver:

Determine login:

readyToLogin gpo2stan -a stanford-ig
readyToLogin gpo2stan -a gpo-ig

Traffic

Iperf Stanford IG VM to GPO IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf Stanford IG VM to GPO IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from Stanford IG VM to GPO IG VM

Iperf GPO IG VM to Stanford IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf GPO IG VM to Stanford IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from GPO IG VM to Stanford IG VM

ION Site to AL2S site via Salt Lake Cross Connect

Create the sliver:

Determine login:

readyToLogin gpo2stan -a stanford-ig
readyToLogin gpo2stan -a gpo-ig

Traffic

Iperf Stanford IG VM to GPO IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf Stanford IG VM to GPO IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from Stanford IG VM to GPO IG VM

Iperf GPO IG VM to Stanford IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf GPO IG VM to Stanford IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from GPO IG VM to Stanford IG VM

ION Site to AL2S site via Seattle Cross Connect

Create the sliver:

Determine login:

readyToLogin gpo2stan -a stanford-ig
readyToLogin gpo2stan -a gpo-ig

Traffic

Iperf Stanford IG VM to GPO IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf Stanford IG VM to GPO IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from Stanford IG VM to GPO IG VM

Iperf GPO IG VM to Stanford IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf GPO IG VM to Stanford IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from GPO IG VM to Stanford IG VM

ION Site to AL2S site via Washington Cross Connect

Create the sliver:

Determine login:

readyToLogin gpo2stan -a stanford-ig
readyToLogin gpo2stan -a gpo-ig

Traffic

Iperf Stanford IG VM to GPO IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf Stanford IG VM to GPO IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from Stanford IG VM to GPO IG VM

Iperf GPO IG VM to Stanford IG VM (TCP) - TCP window size: xxx KByte (default)

Collected: 2014-09-19

One Client

Five Clients

Ten Clients

Iperf GPO IG VM to Stanford IG VM (UDP) - UDP buffer size: xxx KByte (default)

Ping from GPO IG VM to Stanford IG VM