Version 9 (modified by, 6 years ago) (diff)


OESS-T2: Two Site Cross-connect tests

This test case verifies Two Site Cross-connect scenarios. For overall status see the GENI OESS Topologies Test Status page.

Test Status

This section captures the status for each function verified by this test plan.

Scenario State Ticket Notes
1. ION to AL2S experiment
2. Meso-scale to AL2S experiment
3. AL2S to AL2s experiment

State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.

Test Execution Details

Two endpoints will be connected with the cross-connects defined in each section below.

1. ION to AL2S experiment

An ION to AL2S experiment will connect GPO IG ION to an AL2S Test endpoint.

In order for the above to work, some cross-connect configuration had to be defined to the GENI Stitching Computation Service(SCS) to define the ION side of the cross-point. The ION part of this topology is set with the dynamic GENI NEtwork Stitching which uses SCS to determine paths. The AL2S side of the topology is set up with AM API interface using OMNI, but the path is defined by the user and reserved via the OESS Aggregate.

These are the cross-connects configured for SCS:

AL2S Ports ION Ports
sdn-sw.atla e15/1
sdn-sw.chic e3/1
sdn-sw.clev e5/1
sdn-sw.hous e15/3
sdn-sw.kans e15/1
sdn-sw.losa e1/1
sdn-sw.newy32aoa e3/2
sdn-sw.salt e15/1 e-2/0/0.0
sdn-sw.wash e5/2

These are the test endpoint that are available for testing and

AL2S Test Endpoints
  1. VLAN ranges suggested by Luke for testing: 3950-4000

2. Meso-scale to AL2S experiment

A Meso-scale to AL2S experiment will connect GPO IG ION to Meso-scale VLAN to MAX AL2S. Or if available, experiment may use NYU IG Meso-scale to MAX IG AL2S.

3. AL2S to AL2s experiment

An AL2S to AL2s experiment will connect MAX IG AL2S to an AL2S Test Point. Note, AL2S test-points are available and will be used throughout testing to help establish network connections defined in this plan.