= OESS-T2: Two Site Cross-connect tests = This test case verifies Two Site Cross-connect scenarios. For overall status see the [wiki:GENIOESSTopologiesTestStatus GENI OESS Topologies Test Status] page. = Test Status = This section captures the status for each function verified by this test plan. || '''Scenario''' || '''State''' || ''' Ticket ''' || '''Notes''' || || 1. ION to AL2S experiment || || || || || 2. Meso-scale to AL2S experiment|| || || || || 3. AL2S to AL2s experiment || || || || [[BR]] || '''State Legend''' || '''Description''' || || [[Color(green,Pass)]] || Test completed and met all criteria || || [[Color(#98FB98,Pass: most criteria)]] || Test completed and met most criteria. Exceptions documented || || [[Color(red,Fail)]] || Test completed and failed to meet criteria. || || [[Color(yellow,Complete)]] || Test completed but will require re-execution due to expected changes || || [[Color(orange,Blocked)]] || Blocked by ticketed issue(s). || || [[Color(#63B8FF,In Progress)]] || Currently under test. || [[BR]] == Test Execution Details == Two endpoints will be connected with the cross-connects defined in each section below. == 1. ION to AL2S experiment == An ION to AL2S experiment will connect GPO IG ION to MAX IG AL2S. == 2. Meso-scale to AL2S experiment == A Meso-scale to AL2S experiment will connect GPO IG ION to Meso-scale VLAN to MAX AL2S. Or if available, experiment may use NYU IG Meso-scale to MAX IG AL2S. == 3. AL2S to AL2s experiment == An AL2S to AL2s experiment will connect MAX IG AL2S to an AL2S Test Point. Note, AL2S test-points are available and will be used throughout testing to help establish network connections defined in this plan.