Changes between Version 11 and Version 12 of GENIOESSTopologiesTestStatus/OESS-T2


Ignore:
Timestamp:
10/22/13 12:09:39 (6 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIOESSTopologiesTestStatus/OESS-T2

    v11 v12  
    88
    99|| '''Scenario'''                  || '''State'''  || ''' Ticket '''  || '''Notes'''   ||
    10 || 1. ION to AL2S experiment       ||              ||                 ||               ||
     10|| 1. ION to AL2S experiment       ||[[Color(#63B8FF,In Progress)]]||                 ||               ||
    1111|| 2. Meso-scale to AL2S experiment||              ||                 ||               ||
    1212|| 3. AL2S to AL2s experiment      ||              ||                 ||               ||
     
    2222[[BR]]
    2323
    24 == Test Execution Details ==
    25 Two endpoints will be connected with the cross-connects defined in each section below.
     24== 1. ION to AL2S experiments ==
    2625
    27 === 1. ION to AL2S experiment ===
     26The two endpoints GPO IG host and AL2S test endpoints will be connected using each of the 10 cross-connects defined between Internet ION aggregate and AL2S OESS aggregate.
    2827
    29 An ION to AL2S experiment will connect GPO IG ION to an AL2S Test endpoint.
     28The ten cross-connect were configured in the GENI Stitching Computation Service(SCS) to define the ION side of the network path. The ION part of this topology is set up with the dynamic GENI Network Stitching which uses SCS to determine paths.  The AL2S side of the topology is set up with AM API interface using OMNI, but the path is defined manually defined by the user and reserved via the OESS Aggregate.
    3029
    31 In order for the above to work, some cross-connect configuration had to be defined to the GENI Stitching Computation Service(SCS) to define the ION side of the cross-point.
    32 The ION part of this topology is set with the dynamic GENI NEtwork Stitching which uses SCS to determine paths.  The AL2S side of the topology is set up with AM API interface using OMNI, but the path is defined by the user and reserved via the OESS Aggregate.
    33 
    34 These are the cross-connects configured for SCS:
     30These are the cross-connects that are verified:
    3531
    3632||''' x-connect'''||''' AL2S Ports '''       || ''' ION Ports'''   ||
     
    5652|| urn="urn:publicid:IDN+oess:foam:nddi+sdn-sw.wash.net.internet2.edu+e15/2" ||
    5753
    58 VLAN ranges suggested by Luke for testing: '' 3950-4000''
     54The Atlanta test end-poing is used for all 10 scenarios covered.  The GPO endpoint is a node in the InstaGENI rack, which changes with every set up.
    5955
    60 '''Cross-connect 1 - sdn-sw.losa e1/1 <-> rtr.losa:port=et-10/0/0 '''
     56The VLAN ranges used for testing: '' 3950-4000''
     57
     58=== Cross-connect 1 - sdn-sw.losa e1/1 <-> rtr.losa:port=et-10/0/0 ===
    6159
    6260For the first topology attempted tried the following:
     
    6765
    6866
    69 '''Cross-connect 2 - sdn-sw.atla e15/1  <-> rtr.atla:port=xe-0/3/0 '''
     67=== Cross-connect 2 - sdn-sw.atla e15/1  <-> rtr.atla:port=xe-0/3/0 ===
    7068 
    71 '''Cross-connect 3 - sdn-sw.chic e3/1  <->  rtr.chic:port=et-10/0/0'''
     69=== Cross-connect 3 - sdn-sw.chic e3/1  <->  rtr.chic:port=et-10/0/0 ===
    7270
    73 '''Cross-connect 4 - sdn-sw.clev e5/1  <->  rtr.clev:port=et-5/0/0'''
     71=== Cross-connect 4 - sdn-sw.clev e5/1  <->  rtr.clev:port=et-5/0/0 ===
    7472
    75 '''Cross-connect 5 - sdn-sw.hous e15/3 <->  rtr.hous:port=xe-0/1/3'''
     73=== Cross-connect 5 - sdn-sw.hous e15/3 <->  rtr.hous:port=xe-0/1/3 ===
    7674
    77 '''Cross-connect 6 - sdn-sw.kans e15/1 <->  rtr.kans:port=xe-0/0/3'''
     75=== Cross-connect 6 - sdn-sw.kans e15/1 <->  rtr.kans:port=xe-0/0/3 ===
    7876 
    79 '''Cross-connect 7 - sdn-sw.newy32aoa e3/2 <-> rtr.newy:port=et-5/0/0'''
     77=== Cross-connect 7 - sdn-sw.newy32aoa e3/2 <-> rtr.newy:port=et-5/0/0 ===
    8078
    81 '''Cross-connect 8 -  sdn-sw.salt e15/1  <->  rtr.salt:port=xe-0/1/1'''
     79=== Cross-connect 8 -  sdn-sw.salt e15/1  <->  rtr.salt:port=xe-0/1/1 ===
    8280
    83 '''Cross-connect 9 - sdn-sw.seat e-2/0/0.0  <-> rtr.seat:port=et-5/0/0'''
     81=== Cross-connect 9 - sdn-sw.seat e-2/0/0.0  <-> rtr.seat:port=et-5/0/0 ===
    8482
    85 '''Cross-connect 10 - sdn-sw.wash e5/2 <-> rtr.wash:port=et-9/0/0 '''
     83=== Cross-connect 10 - sdn-sw.wash e5/2 <-> rtr.wash:port=et-9/0/0 ===
    8684
    8785