wiki:GENIMonitoring/HowTo

Version 25 (modified by lnevers@bbn.com, 5 years ago) (diff)

--

GENI Monitoring How-to

This provides and overview of available GENI Monitoring by doing a walk-trough of the system to answer common user questions. Each sections high-light potential ways to answer the user question

GENI Monitoring Layout

When you first login to the GENI Monitoring system, you will be presented with the following page:

No image "GENIMonMain.jpg" attached to GENIMonitoring/HowTo

Functions are as follows:

[1] All monitoring functions are available from the "Main Navigation" in the left side of the page.
[2] The "Main Panel" shows status information and initially displays the "Dashboard".
[3] Toggle that hides/shows the "Main Navigation" on the left side of the page. Most navigation is possible using the "Main Panel".
[4] User ID/Operations. Provides access to "Sign Out" and "Profile" where you can change your password.
[5] Allow search within the "Main Panel" area shown.
[6] Allows search across all areas of monitoring.

Monitoring Data by User Type

The data available to you is based on the user type associated with your account. The following user types are available:

  • Admin - User has all administrative functions and can see all data
  • Operator - Has privileges over monitoring data, but no administrative access.
  • Experimenter - User can only see their own data, and has no access to other user data.

Following is a table that highlight which function are available by user type:

Main Navigation functionAdminOperatorExperimenter
(User) Administration Yes No No
GENI Alerts Yes Yes Yes
GENI Objects - Users Yes Yes No
GENI Objects - Slices Yes Yes Yes
GENI Objects - Slivers Yes Yes Yes
GENI Objects - Checks Yes Yes Yes
GENI Stores - Aggregates Yes Yes Yes
GENI Stores - Authorities Yes Yes Yes
GENI Stores - Check Stores Yes Yes Yes
GENI Hardware - Nodes Yes Yes Yes
GENI Hardware - Interfaces Yes Yes Yes
GENI Hardware - Links Yes Yes Yes
GENI Hardware - VLANs Yes Yes Yes

Finding an Experimenter Slice

To find a slices simply select the Dashboard->Slices icon or from the "Main Navigation" choose GENI Objects->Slices . Both result in the "Main Panel" listing all active slices, you may further narrow down your search by typing the project or slice name in the search box at the top right hand corner of the main panel.

Traffic Statistics

If you are interested in traffic statistic for you slice there are two ways to get to statistics for your experiment: you can start with the Slice or start with a VLAN.

Starting with Slice

Select "Slices" and find your slice. Once your slice is select you can see the "Information" window which looks as follows:

No image "slice-info.jpg" attached to GENIMonitoring/HowTo

This page includes a summary of slice information (URN, creation time, expiration time, etc) and several tabs that provide monitoring functions. The tabs are:

  • "Map" - Shows a diagram of the monitored components and their relationship within the monitoring system. This is not a topology map.
  • "Members" - Shows the project members for the slice.
  • "Slivers" - Show the list of slice slivers being monitored for the slice.

To get traffic statistics select the "Slivers" tab and click on the Sliver ID:

No image "sliver-tab.jpg" attached to GENIMonitoring/HowTo

This will results in a list of links associates with the sliver. Select a link to see the associated (interface:VLAN) endpoints. Here are example endpoints:

No image "endpoints.jpg" attached to GENIMonitoring/HowTo

Once of your slice end-points is the AL2S Router (sd-sn.losa.net.internet.edu) and its interface eth5/1 has a VLAN 1564. Selecting the Endpoint ID will results in statistics being shown:

No image "Report-stats.jpg" attached to GENIMonitoring/HowTo

Note: You can select the report type to show live data or historical data over specified range.

Starting with VLAN(s)