| 418 | | The GPO Base Station was configured with [http://www.airspan.com/netspan/ NetSpan], an SNMP based Web interface tool by [http://www.airspan.com Airspan], which is used to manage Radio Access Network elements in the RAN (4G & 5G) and Backhaul domains. The Rutgers !NetSpan installation was used in this effort and was accessible from BBN over the LTE Multipoint VLAN at this address location: |
| | 418 | The BBN Base Station was configured to use an IP address from the range allocated to BBN in the [http://wimax.orbit-lab.org/wiki/aaOperations#IPaddressassignment ORBIT Site Operations IP Address Assignment] table. The AirHarmony1000 Base station web interface was used to apply the address: |
| | 419 | |
| | 420 | [[Image(BBNBaseStationIP.jpeg, 50%)]] |
| | 421 | |
| | 422 | ''Note: 1) A class B subnet mask was applied to allow routing across sites. 2) The Base Station was used with and without VLAN tagging.'' |
| | 423 | |
| | 424 | |
| | 425 | Once the Base Station was configured and reachable, it was added to [http://www.airspan.com/netspan/ NetSpan], an SNMP based Web interface tool by [http://www.airspan.com Airspan], which is used to manage Radio Access Network elements in the RAN (4G & 5G) and Backhaul domains. The Rutgers !NetSpan installation was used in this effort and was accessible from BBN over the LTE Multipoint VLAN at this address location: |
