Changes between Version 73 and Version 74 of GENILTE/LTEDeployment

Timestamp:

06/19/17 16:52:21 (7 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENILTE/LTEDeployment

@@ -420 +420 @@
 = Base Station Configuration =
 
-The GPO Base Station was configured with [http://www.airspan.com/netspan/ NetSpan], which is an SNMP based Web interface tool delivered by [http://www.airspan.com Airspan] to manage  Radio Access Network elements in the RAN (4G & 5G) and Backhaul domains. The Rutgers installation of !NetSpan was used in this procedure and was accessible from BBN over the LTE Multipoint VLAN at this location: 
+The GPO Base Station was configured with [http://www.airspan.com/netspan/ NetSpan], an SNMP based Web interface tool by [http://www.airspan.com Airspan], which is used to manage  Radio Access Network elements in the RAN (4G & 5G) and Backhaul domains. The Rutgers !NetSpan installation was used in this effort and was accessible from BBN over the LTE Multipoint VLAN at this address location: 
 
 {{{http://10.3.0.252}}}
@@ -428 +428 @@
 == Configure eNodeB settings == 
 
-This section captures the procedure used for creating the BBN eNodeB node entry in !NetSpan and it is assumed other site will use this as a reference, keeping in mind changes required for your  sites Node Types, Radio Profiles and Network Profiles.  Instructions below assume access to a !Netspan system, which  Airspan’s Element Management System. 
-
-== Select an eNodeB to Clone ==
+This captures the procedure used for creating the BBN eNodeB node entry in !NetSpan. It is assumed other site will use this as a reference, but keeping in mind that changes are required for your sites Node Types, Radio Profiles and Network Profiles.  Instructions below assume access to !Netspan. 
+
+=== Select an eNodeB to Clone ===
 
 To access list of available nodes that can be cloned, select "Nodes" in the lower left corner home page.  Double click on "nodes" and a list of nodes appears in the main panel:
@@ -446 +446 @@
 
 
-== Configure Your eNodeB node ==
+=== Configure Your eNodeB node ===
 
 Access node configuration details, by selecting "Nodes" in the lower left corner of the home page and a list of nodes will be shown in the main panel.  In our case we double click on the  "BBN eNodeB" entry. In the resulting page, select the "Provision" tab, scroll to the bottom of the page and click "Edit" to modify settings.  Following is a capture of the "BBN eNodeB" settings which use the Rutgers MMS and the BBN Cell Radio Profile: