Changes between Version 41 and Version 42 of GENILTE/LTEDeployment

Timestamp:

06/16/17 09:00:59 (7 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENILTE/LTEDeployment

@@ -437 +437 @@
 [[Image(BBBNetworkProfile.jpeg)]]
 
-But initial attempt to get setup running uses the MME at Rutgers, which includes these settings for the Network Profile:
+
+Note that some test runs used the MME at Rutgers, which includes these settings for the Network Profile:
 
 [[Image(AmeriSoftNetworkProfile.jpeg)]]
 
-Once all changes are validated and saved, force a node reset by selecting the "State And Control" tab, then in the "Reprovisioning and Actions" section select "Forced Reset Node" from the Action pull-down and click "OK". 
+Select the Network profile that includes the MME for your site, in our case the BBN-AmarisoftMME1000 profile above, click "Validate" and then "OK".
+
+== Reset eNobeB and Set In Service ==
+
+For configurations to be properly applied, we found that a forced reset was needed. This reset is available by selecting the "State And Control" tab, then in the "Reprovisioning and Actions" section select "Forced Reset Node" from the Action pull-down and click "OK". 
 
 [[Image(ForceReset.jpeg)]]