Changes between Version 115 and Version 116 of GENILTE/LTEDeployment

Timestamp:

06/22/17 14:55:24 (7 years ago)

Author:

hdempsey@bbn.com

Comment:

minor fixes

GENILTE/LTEDeployment

@@ -46 +46 @@
  1. The [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/home OpenAirInterface(OAI)] software '''must''' run on a dedicated Bare Metal compute node for ExoGENI racks or Raw PC compute node for InstaGENI sites.  (Do not use a VM compute resource.)
  2. The ePC requires that the General Packet Radio Service Tunneling Protocol (GRTP) Linux module is enabled.
- 3. The dedicated Raw PC must be configured with expanded disk space.
+ 3. The dedicated Raw PC must be configured with expanded disk space (instructions below).
 
 ---------
@@ -114 +114 @@
 == Installing OAI ePC Software ==
 
-Assuming you have completed the 4.8 Kernel installation and enabled the GPRS module in previous section, we now proceed to install the !OpenAirInterface software as specified in the [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/GetSources OAI Repository].  The wiki OAI Repository provides a page that captures [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/HowToConnectCOTSUEwithOAIeNBNew How to Connect OAI ePC with COTS User Equipment] and a [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/AutoBuild Building OAI Executables] page. Instructions from these pages are shown below and were followed in the BBN installation:
+Assuming you have completed the 4.8 Kernel installation and enabled the GPRS module as explained in previous section, proceed to install the !OpenAirInterface software as specified in the [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/GetSources OAI Repository].  The wiki OAI Repository provides a page that captures [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/HowToConnectCOTSUEwithOAIeNBNew How to Connect OAI ePC with COTS User Equipment] and a [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/AutoBuild Building OAI Executables] page. Instructions from these pages are shown below and were followed in the BBN installation:
 
 {{{
@@ -127 +127 @@
 }}}
 
-Next the installation of the OAI packages:
+Next, install the OAI packages:
 {{{
 sudo apt-get update