Changes between Version 52 and Version 53 of GENIExperimenter/Tutorials/jacks/GettingStarted_PartII_ccn/Procedure/Setup
- Timestamp:
- 09/15/15 14:36:35 (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/jacks/GettingStarted_PartII_ccn/Procedure/Setup
v52 v53 252 252 <ol type='a' start='3'> 253 253 <li> 254 You will be adding three install scripts. First, select "<tt>Add</tt>" under the <b>Install Scripts</b> sections as shown. In the box in the <b>URL</b> field enter (cut-and-paste): <br>254 <b>For today, do not add these scripts just observe that they are already specified.</b> You will be adding three install scripts. First, select "<tt>Add</tt>" under the <b>Install Scripts</b> sections as shown. In the box in the <b>URL</b> field enter (cut-and-paste): <br> 255 255 <pre>http://www.gpolab.bbn.com/experiment-support/LabOne/ccnx/ccnx-0.6.2.tar.gz</pre> 256 256 and enter … … 274 274 <br> 275 275 276 <li> In a similar manner, use the "<tt>Add</tt>" button under the <b>Execute Scripts</b> section to add three execute services on this node:276 <li><b>For today, do not add these scripts just observe that they are already specified.</b> In a similar manner, use the "<tt>Add</tt>" button under the <b>Execute Scripts</b> section to add three execute services on this node: 277 277 <br> 278 278 <pre>