Changes between Version 50 and Version 51 of GENIExperimenter/Tutorials/jacks/GettingStarted_PartII_ccn/Procedure/Setup
- Timestamp:
- 09/15/15 10:27:34 (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/jacks/GettingStarted_PartII_ccn/Procedure/Setup
v50 v51 165 165 <ol type='a' start='4'> 166 166 <li>Enter the URL for the RSpec: <br> 167 <tt> http://www.gpolab.bbn.com/experiment-support/ ccnx-xen/LabOneCCNX_request_rspec.xml </tt> <br>167 <tt> http://www.gpolab.bbn.com/experiment-support/LabOne/ccnx/LabOneCCNX_request_line_FULL.xml </tt> <br> 168 168 then click <b>Select</b>.<br/> 169 169 </li> … … 254 254 <li> 255 255 You will be adding three install scripts. First, select "<tt>Add</tt>" under the <b>Install Scripts</b> sections as shown. In the box in the <b>URL</b> field enter (cut-and-paste): <br> 256 <pre>http://www.gpolab.bbn.com/experiment-support/ ccnx-xen/ccnx-0.6.2.tar.gz</pre>256 <pre>http://www.gpolab.bbn.com/experiment-support/LabOne/ccnx/ccnx-0.6.2.tar.gz</pre> 257 257 and enter 258 258 <pre>/</pre> … … 261 261 <br> 262 262 Now, select "<tt>Add</tt>" under the <b>Install Scripts</b> again. This time add: <br> 263 <pre>http://www.gpolab.bbn.com/experiment-support/ ccnx-xen/ccnx-atmos.tar.gz</pre>263 <pre>http://www.gpolab.bbn.com/experiment-support/LabOne/ccnx/ccnx-atmos.tar.gz</pre> 264 264 and enter <br> 265 265 <pre>/</pre> … … 268 268 <br> 269 269 Similarly, add a third install service: 270 <pre>http://www.gpolab.bbn.com/experiment-support/ ccnx-xen/ccnx-setup.tar.gz</pre>270 <pre>http://www.gpolab.bbn.com/experiment-support/LabOne/ccnx/ccnx-setup.tar.gz</pre> 271 271 and enter <br> 272 272 <pre>/tmp</pre>