Changes between Version 17 and Version 18 of GENIExperimenter/Tutorials/jacks/GettingStarted_PartI/Procedure/DesignSetup


Ignore:
Timestamp:
10/17/14 09:40:56 (9 years ago)
Author:
rrhain@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIExperimenter/Tutorials/jacks/GettingStarted_PartI/Procedure/DesignSetup

    v17 v18  
    287287            <li>Now click near one of the VM boxes on the canvas, then click and drag towards the other VM.  Release when you reach the other VM.  You should now see a line and a box representing a link connecting the two VMs.</li>
    288288            <li>The canvas should now look like the picture on the right.</li>
    289             <li>To edit the name of each VM, click the VM box.</li>
     289            <li>To edit the name of the VM, click the VM box.</li>
    290290          </ol>
    291291       </td>
     
    304304
    305305            <li>In the "Name" field at the top, replace "node-0" with "client".</li>
     306            <li>Repeat for the VM labeled node-1.  In the "Name" field at the top, replace "node-1" with "server".</li>
    306307
    307308         </ol>
     
    320321            <li>Enter an IP Address for this node of <i>10.1.1.1</i>.</li>
    321322            <li>Enter a Mask of <i>255.255.255.0</i>.</li>
    322             <li>Repeat the above six steps for the second VM, node-1, labeling it "server" and setting the server's IP Address to <i>10.1.1.2</i> and a Mask of <i>255.255.255.0</i>.</li>
     323            <li>Scroll down further and set that interface to the server's IP Address to <i>10.1.1.2</i> and a Mask of <i>255.255.255.0</i>.</li>
    323324          </ol>
    324325       </td>