Changes between Version 34 and Version 35 of GENIExperimenter/Tutorials/jacks/GetStart_PartI_IPRoute/Procedure/Execute

Timestamp:

11/04/14 17:43:49 (9 years ago)

Author:

sedwards@bbn.com

Comment:

--

GENIExperimenter/Tutorials/jacks/GetStart_PartI_IPRoute/Procedure/Execute

@@ -179 +179 @@
          <ol  type='a'>
             <li>What happens when you run <tt>traceroute</tt> from A to IP address <tt>192.168.2.12</tt> before you setup the static routes? Why? </li>
-            <li> Setup the routing from A to <tt>192.68.2.12</tt> so that it goes through B as shown in Figure 5-1.  Use the <tt>route</tt> command and the Tips listed below.  
+            <li> Setup the routing from A to <tt>192.68.2.12</tt> so that it goes through B as shown in Figure 5-1.  Use the <tt>route</tt> command and the <a href="#TipsforCompletingSection5.2">Tips</a> listed below.  
              <ol type='i'>
               <li>In order to create this routing behavior you will need to modify the routing tables in your nodes using the linux