Changes between Version 21 and Version 22 of GENIExperimenter/Tutorials/jacks/GetStart_PartI_IPRoute/Procedure/Execute


Ignore:
Timestamp:
11/04/14 13:43:35 (5 years ago)
Author:
sedwards@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIExperimenter/Tutorials/jacks/GetStart_PartI_IPRoute/Procedure/Execute

    v21 v22  
    177177       <td >
    178178         <ol  type='a'>
    179             <li> Configure the routing as shown in Figure 5-1 using the <tt>route</tt> command and the Tips listed below.  i.e. packets from A sent to IP address 192.168.2.12 on node C should be routed via node B. In order to create this routing behavior you will need to modify the routing tables in your nodes using the linux
     179            <li>What happens when you traceroute from A to IP address 192.168.2.12 before you setup the static routes? Why? </li>
     180            <li> Setup the routing from A to 192.68.2.12 so that it goes through B as shown in Figure 5-1.  Use the <tt>route</tt> command and the Tips listed below. 
     181             <ol type='i'>
     182              <li>In order to create this routing behavior you will need to modify the routing tables in your nodes using the linux
    180183<a href ="http://www.hscripts.com/tutorials/linux-commands/route.html"> route command </a></li>
    181             <li>Answer the following questions:
    182              <ol>
    183               <li>What happens when you traceroute from A to IP address 192.168.2.12 before you setup the static routes? Why? </li>
    184               <li>Setup the routing from A to 192.68.2.12 so that it goes through B. Was it enough to just modify the routing tables? What else  did you need to change in order for the traffic to flow? Ensure that you have connectivity by running a ping from A to 192.168.2.12</li>
    185               <li>What happens when you traceroute from A to IP address 192.168.2.12 after you setup the static routes? </li>
    186              </ol>
    187 
    188            </li>
     184              <li>Was it enough to just modify the routing tables? What else  did you need to change in order for the traffic to flow?</li>
     185              <li>Ensure that you have connectivity by running a ping from A to 192.168.2.12</li>
     186             </ol>
     187              <li>What happens when you traceroute from A to IP address 192.168.2.12 after you setup the static routes?             
     188             </li>
    189189          </ol>
    190190       </td>